Clock removal-gauge replacement

m4a1mustang · 03-09-2010, 09:55 AM

The defi's look better, IMO, but those are still nice.

spearfish25 · 03-09-2010, 09:58 AM

Still waiting for Lou to post a DIY...

vipor · 03-09-2010, 10:23 AM

Don't know why it sounds windy or why the wipers stay on for so long...

Modshack · 03-09-2010, 10:29 AM

Quote:

Originally Posted by m4a1mustang

The defi's look better, IMO, but those are still nice.

Defi's are extremely nice. I had a full compliment in my Audi. You don't need to go with the link series with controller. Their Racer series are the same high quality stepper motor electronic gauges, just without the programming controls of the link system (they're all real gauges, BTW, not video screens as reported earlier). Defi's been doing this for a long time.
Check em out: Defi - Gauges & Head up displays

Quote:

Originally Posted by spearfish25

Still waiting for Lou to post a DIY...

I think Lou had this done so it's unlikely we'll get a DIY. I think the project got a lot more involved then originally planned....

vipor · 03-09-2010, 10:30 AM

The reason I like the Link system is the ability to just run 1 daisy chain to the gauges and just have all the senders routed into the controller. Simplicity. The programming and playback and all that is just extra benefit.

FuszNissan · 03-09-2010, 10:31 AM

Quote:

Originally Posted by spearfish25

Still waiting for Lou to post a DIY...

Don't look at me, AAM did the install. I would have chopped the dash in half trying to pull off what they did.

I doubt if they post a DIY for the install. Clint said they had to rip out the entire dash to do it clean. Doubt they took step by step pics, Sounds like a Friday to Sunday DIY job.

m4a1mustang · 03-09-2010, 10:35 AM

Quote:

Originally Posted by vipor

Don't know why it sounds windy or why the wipers stay on for so long...

Those look nice. The chrome rings are suited to that Mustang... don't think they'd quite jive with the 370.

As for the wind... he had his AC on. Dunno about the wipers.

FuszNissan · 03-09-2010, 11:11 AM

I'm a DeFi whore.(can't beat there quality) Those Nexus do look nice though.

1slow370 · 03-10-2010, 10:03 AM

i like the autometers for the glass face as well so you won't have a problem seeing them if sunlight hits them so i figured i's throw em up for the roadster people. paint the ring on the nexus's and i could go either way since they both do the same things it becomes a price battle

edit:also the defi's only come in red amber which is red and the nexus can change through like twelve colors including the red in the video and an amber lighting

JB-370z · 03-10-2010, 11:56 AM

The bottom line is...Someone needs to do a dyi for this inastall. If I did not have my hands full with other mods comming in I would not mind doing it. This is somthing many people are interested in, so a diy would make many happy! We will see if anyone has the balls to do it soon, I hope.

rarwz · 03-15-2010, 08:36 AM

I started trying to figure this out, but yea you either need to remove the dash, or (i didn't try this) remove the NAV to possibly get under the gauges.
Request: DIY Oil Pressure Gauge Install

kellyefields · 10-27-2011, 11:10 PM

Ok I decided to tackle the dash today following the service manual for the removal. The manual works very well that I figured there was no reason to do a dyi for this. but for all those thinking you can get to the guages without removing the dash think again. look at the picture below and you see those four screws holding in the guage cluster there is no way to get to them without the dash being removed. Also the guage cluster is set up in such a way that you would need to change all three. I used prosport guages and once I get the power back up I will snap a pic. but for those worried about the size of the job it only took about 2.5 hrs to remove the dash. It actually took me longer to figure how I was going to remount the guages. The only speciality tools needed is the locking hex bolt for the removal of the steering wheel and body panel removal tools (the plastic pry bars) and then assorted sockets and screwdrivers, needle nose pliers. but not a bad job and everything came out easily and going back in just as easy. all in all about a 5 hr job to take out and put back in and then add the amount of time figuring out what/how you want to run your guages.

[IMG]

[/IMG]

DIGItonium · 10-28-2011, 12:11 AM

I don't know what they're thinking when they designed this car. Did you end up removing the steering wheel as well? I was able to remove the combination meter without removing the steering wheel.

Anyhow, here's my mod thread:
DIY: Interior LED Color Change

kellyefields · 10-28-2011, 10:30 AM

yeah I removed the steering wheel. It only takes a couple of minutes and it just makes things easier IMO.

DIGItonium · 10-29-2011, 10:35 AM

I think my new ones are held down with zip ties, but hopefully removal does not require the same process. Looking back I wish I had 1 plx display for odb, and one for other sensors. Maybe someday

03-09-2010, 09:55 AM	#31 (permalink)
m4a1mustang A True Z Fanatic Join Date: Feb 2009 Location: Northern VA Posts: 55,385 Drives: on two wheels Rep Power: 6962	The defi's look better, IMO, but those are still nice. __________________ - Steve Zs & Coffee - Saturdays at 10AM in Fairfax, VA and Columbia, MD (Click the banner!) LIKE us on Facebook!

03-09-2010, 09:58 AM	#32 (permalink)
spearfish25 A True Z Fanatic Join Date: Mar 2009 Location: Naples, FL Posts: 4,117 Drives: to work Rep Power: 1856	Still waiting for Lou to post a DIY... __________________ 2013 Cadillac V-Wagon, RIP Z

03-09-2010, 10:23 AM	#33 (permalink)
vipor A True Z Fanatic Join Date: Aug 2009 Location: Euless, TX [ DFW ] Age: 42 Posts: 13,531 Drives: Nismo 09-0183 QAB Rep Power: 49	Don't know why it sounds windy or why the wipers stay on for so long... __________________ 2009 NISMO # 0193 \| QAB \| Albums! \| 05.04.10 (Dynojet) 291.94hp/248.28tq Oil Cooler (DIY) \| Custom Headlights \| GTSPEC Braces \| F.I. Long Tube Headers

03-09-2010, 10:30 AM	#35 (permalink)
vipor A True Z Fanatic Join Date: Aug 2009 Location: Euless, TX [ DFW ] Age: 42 Posts: 13,531 Drives: Nismo 09-0183 QAB Rep Power: 49	The reason I like the Link system is the ability to just run 1 daisy chain to the gauges and just have all the senders routed into the controller. Simplicity. The programming and playback and all that is just extra benefit. __________________ 2009 NISMO # 0193 \| QAB \| Albums! \| 05.04.10 (Dynojet) 291.94hp/248.28tq Oil Cooler (DIY) \| Custom Headlights \| GTSPEC Braces \| F.I. Long Tube Headers

03-09-2010, 11:11 AM	#38 (permalink)
FuszNissan A True Z Fanatic Join Date: May 2009 Location: St. Louis Posts: 14,275 Drives: Pure Sex Rep Power: 542	I'm a DeFi whore.(can't beat there quality) Those Nexus do look nice though. __________________ Mods: Too Many to list! LouFuszNissan ZDAYZ 2012

03-10-2010, 10:03 AM	#39 (permalink)
1slow370 A True Z Fanatic Join Date: Aug 2009 Location: In the D Posts: 3,732 Drives: v8 74 260z ;) Rep Power: 7251	i like the autometers for the glass face as well so you won't have a problem seeing them if sunlight hits them so i figured i's throw em up for the roadster people. paint the ring on the nexus's and i could go either way since they both do the same things it becomes a price battle edit:also the defi's only come in red amber which is red and the nexus can change through like twelve colors including the red in the video and an amber lighting __________________ ANSWER PRICE LIST Answers - - - - - - - - - - - - - - - - $0.75 Answers (requiring thought) - - - - $1.25 Answers (correct) - - - - - - - - - - $12.50 Last edited by 1slow370; 03-10-2010 at 10:06 AM.

03-10-2010, 11:56 AM	#40 (permalink)
JB-370z A True Z Fanatic Join Date: Apr 2009 Location: Houston, Tx Posts: 1,859 Drives: Stage 2 Twin Turbos Rep Power: 19	The bottom line is...Someone needs to do a dyi for this inastall. If I did not have my hands full with other mods comming in I would not mind doing it. This is somthing many people are interested in, so a diy would make many happy! We will see if anyone has the balls to do it soon, I hope. __________________ ll Baker Tuning ll GTM ll Powerhouse Amuse ll HKS ll Up-Rev ll iForged ll AP Racing ll Pioneer ll SPL ll Bride ll Top Secret ll OS Giken ll GTM Stage 2 Twin Turboed 370z (First in Texas, Thanks To Baker Tuning)

03-15-2010, 08:36 AM	#41 (permalink)
rarwz Base Member Join Date: Mar 2010 Location: 370z Posts: 178 Drives: 09 Touring Rep Power: 15	I started trying to figure this out, but yea you either need to remove the dash, or (i didn't try this) remove the NAV to possibly get under the gauges. Request: DIY Oil Pressure Gauge Install

10-27-2011, 11:10 PM	#42 (permalink)
kellyefields A True Z Fanatic Join Date: Nov 2010 Location: Lexington Ky #BBN Age: 48 Posts: 1,156 Drives: Supercharged Rep Power: 17	Ok I decided to tackle the dash today following the service manual for the removal. The manual works very well that I figured there was no reason to do a dyi for this. but for all those thinking you can get to the guages without removing the dash think again. look at the picture below and you see those four screws holding in the guage cluster there is no way to get to them without the dash being removed. Also the guage cluster is set up in such a way that you would need to change all three. I used prosport guages and once I get the power back up I will snap a pic. but for those worried about the size of the job it only took about 2.5 hrs to remove the dash. It actually took me longer to figure how I was going to remount the guages. The only speciality tools needed is the locking hex bolt for the removal of the steering wheel and body panel removal tools (the plastic pry bars) and then assorted sockets and screwdrivers, needle nose pliers. but not a bad job and everything came out easily and going back in just as easy. all in all about a 5 hr job to take out and put back in and then add the amount of time figuring out what/how you want to run your guages. [IMG][/IMG] __________________ MY 2009 SC BUILD.

10-28-2011, 12:11 AM	#43 (permalink)
DIGItonium A True Z Fanatic Join Date: Jan 2009 Location: Kansas Posts: 3,800 Drives: 09 Z34-TT 6MT Rep Power: 43	I don't know what they're thinking when they designed this car. Did you end up removing the steering wheel as well? I was able to remove the combination meter without removing the steering wheel. Anyhow, here's my mod thread: DIY: Interior LED Color Change __________________

10-28-2011, 10:30 AM	#44 (permalink)
kellyefields A True Z Fanatic Join Date: Nov 2010 Location: Lexington Ky #BBN Age: 48 Posts: 1,156 Drives: Supercharged Rep Power: 17	yeah I removed the steering wheel. It only takes a couple of minutes and it just makes things easier IMO. __________________ MY 2009 SC BUILD.

10-29-2011, 10:35 AM	#45 (permalink)
DIGItonium A True Z Fanatic Join Date: Jan 2009 Location: Kansas Posts: 3,800 Drives: 09 Z34-TT 6MT Rep Power: 43	I think my new ones are held down with zip ties, but hopefully removal does not require the same process. Looking back I wish I had 1 plx display for odb, and one for other sensors. Maybe someday __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
How to set the clock?	Inspector71	Exterior & Interior	20	02-10-2012 11:22 PM
Rear 370Z Emblem Removal or Replacement?	SoCal 370Z	Exterior & Interior	112	10-06-2011 09:29 AM
STRI Oil Pressure Gauge... Amber 52mm to replace your clock !	travisjb	Parts for sale (Private Classifieds)	33	03-09-2010 07:02 PM
clock	mbz	Exterior & Interior	4	10-05-2009 12:15 AM
What happened to the tire pressure gauge and speedo in the middle gauge cluster?	rbratton	Nissan 370Z General Discussions	33	01-24-2009 11:28 PM