Ikon motorsports: anyone used them?

Machina · 01-23-2018, 03:49 PM

Ikon motorsports has pre-painted Nismo spoilers for a pretty good price. Just curious if anyone has ever gotten one from them and how good is the quality and install?

ClemsonVQdude · 01-31-2018, 04:16 PM

I just installed the nismo style spoiler from Ikon about 2 weeks ago. No instructions came with it but its a very easy install, if you need more info on the install i can help you out. Four screws and i put some double sided 3m tape under it just for extra support. Looks great, paint matches perfectly.

Electrify904 · 01-31-2018, 07:08 PM

I've been curious about this as well. The problem is that my 2016 Nismo spoiler has about 8000 extra holes

I really like the pre 2015 Nismo spoilers though.

PaulNYz · 01-31-2018, 08:00 PM

I have the ikon front lip. No instructions, but it was easy enough to install and looks pretty good. It came slightly bent. I had no issues bending it into shape during installation though.

Zingston · 01-31-2018, 08:09 PM

Quote:

Originally Posted by PaulNYz

I have the ikon front lip. No instructions, but it was easy enough to install and looks pretty good. It came slightly bent. I had no issues bending it into shape during installation though.

I messaged ikon on eBay a few days ago about installation of that front lip. Their reply was a bit generic, but basically said to get a shop to do it. At that point I lost interest and moved on...

So you were able to install fairly easily? Cutting? Drilling?

Thanks!

mousewei84 · 01-31-2018, 11:49 PM

Quote:

Originally Posted by PaulNYz

I have the ikon front lip. No instructions, but it was easy enough to install and looks pretty good. It came slightly bent. I had no issues bending it into shape during installation though.

Do you think it will help to fill the gap for 14 sport z bumper and Nismo splitter? See my post here:
[Help needed!] How to fill the gap between front bumper and splitter?
Thank you!

Sent from my iPhone using Tapatalk

PaulNYz · 02-01-2018, 05:13 PM

Quote:

Originally Posted by Zingston

I messaged ikon on eBay a few days ago about installation of that front lip. Their reply was a bit generic, but basically said to get a shop to do it. At that point I lost interest and moved on...

So you were able to install fairly easily? Cutting? Drilling?

Thanks!

It was fairly easy - two hours tops because I'm a bit neurotic about positioning. You will have to drill (or use self tapping screws) to attach it on the bottom of the bumper.

PaulNYz · 02-01-2018, 05:14 PM

Quote:

Originally Posted by mousewei84

Do you think it will help to fill the gap for 14 sport z bumper and Nismo splitter? See my post here:
[Help needed!] How to fill the gap between front bumper and splitter?
Thank you!

Sent from my iPhone using Tapatalk

I don't think it will, it's specifically made for the 09-12 bumper. It will also stick out too far for that actual splitter.

Zingston · 02-01-2018, 06:43 PM

Quote:

Originally Posted by PaulNYz

It was fairly easy - two hours tops because I'm a bit neurotic about positioning. You will have to drill (or use self tapping screws) to attach it on the bottom of the bumper.

Sounds easy enough. Thanks

Machina · 02-01-2018, 07:11 PM

Thanks Clemson! Does it come with 3M tape?

Ghh0st · 02-08-2018, 04:01 PM

I just purchased the '13 3 piece lip from them (should be here end of this week). The Z is in storage but I'll definitely reply back when I have time to test fit it.

Machina · 02-08-2018, 11:38 PM

I should have the spoiler by end of month and installed the week after. Will post pics also. Fingers crossed

ChocSoldier · 02-10-2018, 06:58 AM

I have one of their 09-13 lips, and had the same issues with it being bent.. got it mostly straight, but still wasn't enough for tape to stick (my guess is it would eventually stick if I double or triple layered the tape). I did eventually mount it with just the brackets but there were slight gaps.

Also, the included hardware wasn't enough, the rivets were too small and didn't hold it in, I had to get nuts and bolts to hold the bracket to the lip (the self-tapping screws were fine to attach the brackets to the car though). Ended up looking a bit funny having four big gold nuts visible on the front of the car..

I reckon the spoiler would work out better though, it's a bigger piece, and would likely be more sturdy than the lip.

Ghh0st · 02-11-2018, 03:48 PM

Quote:

Originally Posted by Ghh0st

I just purchased the '13 3 piece lip from them (should be here end of this week). The Z is in storage but I'll definitely reply back when I have time to test fit it.

Test fit was decent for the '13 lip. Some slight modifications will be needed. And the center piece will still have white between the grille and the lip section. I think its worth 130 bucks I paid for it.

Ghh0st · 02-18-2018, 08:43 AM

Also, I picked up a nismo spoiler from the spoiler company on eBay. Prepainted too. Test fit looks great and paint matched perfectly.

Sent from my iPhone using Tapatalk

01-23-2018, 03:49 PM	#1 (permalink)
Machina Base Member Join Date: Jul 2017 Location: Memphis Posts: 36 Drives: 2013 camaro SS Rep Power: 8	Ikon motorsports: anyone used them? Ikon motorsports has pre-painted Nismo spoilers for a pretty good price. Just curious if anyone has ever gotten one from them and how good is the quality and install?

01-31-2018, 07:08 PM	#3 (permalink)
Electrify904 Base Member Join Date: May 2015 Location: Florida Posts: 174 Drives: 16 Nismo 6MT BS Rep Power: 10	I've been curious about this as well. The problem is that my 2016 Nismo spoiler has about 8000 extra holes I really like the pre 2015 Nismo spoilers though. wideglideleon likes this. __________________ JAX GZ-R BC Forged 2016 Brilliant Silver NISMO 6MT Past: 2004 6MT G Coupe and 2004 6MT 350Z

02-08-2018, 04:01 PM	#11 (permalink)
Ghh0st Base Member Join Date: Nov 2015 Location: NY Posts: 79 Drives: '13 370z WP 6MT Rep Power: 11	I just purchased the '13 3 piece lip from them (should be here end of this week). The Z is in storage but I'll definitely reply back when I have time to test fit it. Jayhovah likes this.

02-08-2018, 11:38 PM	#12 (permalink)
Machina Base Member Join Date: Jul 2017 Location: Memphis Posts: 36 Drives: 2013 camaro SS Rep Power: 8	I should have the spoiler by end of month and installed the week after. Will post pics also. Fingers crossed Electrify904 likes this.

02-18-2018, 08:43 AM	#15 (permalink)
Ghh0st Base Member Join Date: Nov 2015 Location: NY Posts: 79 Drives: '13 370z WP 6MT Rep Power: 11	Also, I picked up a nismo spoiler from the spoiler company on eBay. Prepainted too. Test fit looks great and paint matched perfectly. Sent from my iPhone using Tapatalk Zoren 370 and StormWhite like this.

01-31-2018, 04:16 PM	#2 (permalink)
ClemsonVQdude Base Member Join Date: Dec 2017 Location: Anderson SC Posts: 52 Drives: 2013 Nissan 370z Rep Power: 7	I just installed the nismo style spoiler from Ikon about 2 weeks ago. No instructions came with it but its a very easy install, if you need more info on the install i can help you out. Four screws and i put some double sided 3m tape under it just for extra support. Looks great, paint matches perfectly.

01-31-2018, 08:00 PM	#4 (permalink)
PaulNYz Base Member Join Date: Feb 2017 Location: Upstate NY Posts: 124 Drives: 12 sport 6MT Rep Power: 8	I have the ikon front lip. No instructions, but it was easy enough to install and looks pretty good. It came slightly bent. I had no issues bending it into shape during installation though.

02-01-2018, 07:11 PM	#10 (permalink)
Machina Base Member Join Date: Jul 2017 Location: Memphis Posts: 36 Drives: 2013 camaro SS Rep Power: 8	Thanks Clemson! Does it come with 3M tape?

02-10-2018, 06:58 AM	#13 (permalink)
ChocSoldier Base Member Join Date: Mar 2017 Location: Sydney, Australia Posts: 14 Drives: 09 370Z G41 M6 Rep Power: 8	I have one of their 09-13 lips, and had the same issues with it being bent.. got it mostly straight, but still wasn't enough for tape to stick (my guess is it would eventually stick if I double or triple layered the tape). I did eventually mount it with just the brackets but there were slight gaps. Also, the included hardware wasn't enough, the rivets were too small and didn't hold it in, I had to get nuts and bolts to hold the bracket to the lip (the self-tapping screws were fine to attach the brackets to the car though). Ended up looking a bit funny having four big gold nuts visible on the front of the car.. I reckon the spoiler would work out better though, it's a bigger piece, and would likely be more sturdy than the lip.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Forged Performance: CHIN Motorsports at Atlanta Motorsports Park	ChadB@Forged	Track / Autocross / Drifting / Dragstrip	0	11-13-2012 10:54 AM
Z1 Motorsports Thermostatic Sandwich Plate kit (For Nissan Motorsports Oil Cooler)	Dustin@Z1	Drivetrain/Engine	3	06-08-2012 12:10 PM
Z1 Motorsports Thermostatic Sandwich Plate kit (For Nissan Motorsports Oil Cooler)	Dustin@Z1	Z1 Motorsports	0	08-06-2010 12:26 PM
2009 Z Nationals Car Show/Motorsports Event @ Z1 Motorsports	Dustin@Z1	Z Nationals	34	10-06-2009 06:06 PM
2009 Z Nationals Car Show / Motorsports Event @ Z1 Motorsports	Dustin@Z1	Z1 Motorsports	0	08-28-2009 11:33 AM