Yay! Trackspec!

ihiryu · 12-27-2017, 11:26 AM

I got my vents today! Can't wait to get it put on nowwwwww

Chuck33079 · 12-27-2017, 11:46 AM

Yeah, mine are sitting in my garage waiting for me to grow the balls to start cutting holes in my hood.

StevenSlice · 12-27-2017, 11:47 AM

After seeing Eagle's car in person, I REALLY want them now. Just put the blindfold on and start cutting chuck.

Chuck33079 · 12-27-2017, 11:50 AM

Quote:

Originally Posted by StevenSlice

After seeing Eagle's car in person, I REALLY want them now. Just put the blindfold on and start cutting chuck.

The problem is that the cost of a replacement hood is more than the cost of having someone who knows what they're doing put them in.

StevenSlice · 12-27-2017, 12:46 PM

Quote:

Originally Posted by Chuck33079

The problem is that the cost of a replacement hood is more than the cost of having someone who knows what they're doing put them in.

Yeah I feel that. But my cars going to get cut up and welded on so i think the level of care is a bit less for me

theDreamer · 12-27-2017, 01:29 PM

Quote:

Originally Posted by Chuck33079

The problem is that the cost of a replacement hood is more than the cost of having someone who knows what they're doing put them in.

I would say cannot be worse than putting in the SC but that was my car not yours.
If you want I will start cutting for you.

Chuck33079 · 12-27-2017, 01:50 PM

Quote:

Originally Posted by theDreamer

I would say cannot be worse than putting in the SC but that was my car not yours.
If you want I will start cutting for you.

I'm absolutely convinced that only the first cut will be nerve wracking. Once you're committed it's probably a breeze.

sx moneypit · 12-27-2017, 03:11 PM

Quote:

Originally Posted by Chuck33079

I'm absolutely convinced that only the first cut will be nerve wracking. Once you're committed it's probably a breeze.

God-Speed · 12-27-2017, 03:39 PM

Just remember, "measure twice, cut once". Ok Measure three times!!

jchammond · 12-27-2017, 06:07 PM

Quote:

Originally Posted by God-Speed

Just remember, "measure twice, cut once". Ok Measure three times!!

Resembles what i did before ordering wheel's...But measured at least 3-Dozen Times.

Felix 808 · 01-07-2018, 10:39 AM

Quote:

Originally Posted by Chuck33079

Yeah, mine are sitting in my garage waiting for me to grow the balls to start cutting holes in my hood.

......
The problem is that the cost of a replacement hood is more than the cost of having someone who knows what they're doing put them in.

Hey Chuck, cutting the hood is the easy part, it's the layout work that is the nerve racking part & can drive you batty. Take your time in the prep work. You can make templates with card board. Tape the hood to prevent / minimize splintering of the paint Small die-grinder & take your time. I'm sure there is a good 1/2" of flange on those to cover any jagged slips.

Quote:

Originally Posted by God-Speed

Just remember, "measure twice, cut once". Ok Measure three times!!

Good advice. Remeber, you have 1 shot at getting it right & in this case 3 chances to muck it up

Good luck

Hotrodz · 12-27-2017, 05:52 PM

I took mine to a body shop since I have no skills!

Sent from my SM-N910P using Tapatalk

Wonka2581 · 02-05-2018, 11:13 PM

Quote:

Originally Posted by Hotrodz

I took mine to a body shop since I have no skills!

Sent from my SM-N910P using Tapatalk

Where did you get that splitter and side blades??

Hotrodz · 02-06-2018, 07:57 AM

Quote:

Originally Posted by Wonka2581

Where did you get that splitter and side blades??

I got them from AeroFlow Dynamics: https://www.aeroflowdynamics.com

Wonka2581 · 02-06-2018, 01:51 PM

Quote:

Originally Posted by Hotrodz

I got them from AeroFlow Dynamics: https://www.aeroflowdynamics.com

I went on the website and did not see anything for the 09-14 Nismo. I called the guy and he said he would need someone with a 09-14 nismo to come by the shop so he can make a template..... WTF...

12-27-2017, 11:26 AM	#1 (permalink)
ihiryu Base Member Join Date: Oct 2016 Location: TX Posts: 141 Drives: 2013 Nismo 370z 6MT Rep Power: 34	Yay! Trackspec! I got my vents today! Can't wait to get it put on nowwwwww TechnicZ likes this.

12-27-2017, 11:46 AM	#2 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29539	Yeah, mine are sitting in my garage waiting for me to grow the balls to start cutting holes in my hood. Rusty likes this. __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

12-27-2017, 11:47 AM	#3 (permalink)
StevenSlice Track Member Join Date: Jun 2017 Location: Lompoc, CA Age: 27 Posts: 502 Drives: Like an idiot Rep Power: 46199	After seeing Eagle's car in person, I REALLY want them now. Just put the blindfold on and start cutting chuck. Eagle likes this. __________________ Kansei Corsa \| Endless \| Winmax \| Hotchkis \| ISR Performance \| SPL Parts \| Voodoo13 \|Sabelt \| PowerTrix \| Corner 3 \|

12-27-2017, 03:39 PM	#9 (permalink)
God-Speed A True Z Fanatic Join Date: Sep 2010 Location: Austin, Tx. Posts: 4,366 Drives: Prototype Rep Power: 2684377	Just remember, "measure twice, cut once". Ok Measure three times!! Felix 808, TMRN370z and jchammond like this.

12-27-2017, 05:52 PM	#12 (permalink)
Hotrodz A True Z Fanatic Join Date: Aug 2012 Location: NW, AZ Posts: 9,330 Drives: 10 Nissan 370z Nismo Rep Power: 2684385	I took mine to a body shop since I have no skills! Sent from my SM-N910P using Tapatalk JARblue, cv129, GaleForce and 9 others like this. __________________ *Fast Intentions TT Installed and Tuned by Seb at SpecialtyZ 610whp 560tq:\|Fast Intentions 3" TT-TDX*\|SpecialtyZ/Fast Intentions 72 Row Oil Cooler\|SZ 6 Puck Clutch & Flywheel\|3GsCustoms\|Z1\|Wavetrac\|Hotchkis\|Whiteline \|Blitz\|Fortune Auto 500\|Fujimura\|SPL\|H&R\|TK\|TWM\|RPM Rollbar\|Sparco\|Next Level Performance\|TrackSpec\|AeroFlow Dynamics\|Pioneer\|