Yay! Trackspec!

Z is 4 ZEBRA! · 07-19-2021, 02:54 PM

Quote:

Originally Posted by redondoaveb

I hope you painted the cut edge's so they wouldn't rust

I believe that the stock 370z hood is aluminum, so it should not rust.

THE BULL · 07-19-2021, 02:58 PM

Quote:

Originally Posted by redondoaveb

I hope you painted the cut edge's so they wouldn't rust

Isnt the hood Aluminum?

redondoaveb · 07-19-2021, 03:05 PM

Quote:

Originally Posted by Z is 4 ZEBRA!

I believe that the stock 370z hood is aluminum, so it should not rust.

Oops, I don't know what I was thinking

I better delete my post before I get racked through the coals

redondoaveb · 07-19-2021, 03:06 PM

Quote:

Originally Posted by THE BULL

Isnt the hood Aluminum?

Yeah, I'm an idiot. Don't know what I was thinking

THE BULL · 07-19-2021, 03:09 PM

On another note, any of y'all running undershields?

I feel as even aftermarket shields should have bigger louvers after the radiator. I installed a homemade shield and cooling efficiency took a small dip but hood doesnt dance at high speeds.

Hotrodz · 07-19-2021, 03:12 PM

Quote:

Originally Posted by redondoaveb

Yeah, I'm an idiot. Don't know what I was thinking

LMAO, old man with sometimerz disease!

Sent from my SM-G965U using Tapatalk

redondoaveb · 07-19-2021, 03:23 PM

Quote:

Originally Posted by Hotrodz

LMAO, old man with sometimerz disease!

Sent from my SM-G965U using Tapatalk

That's my excuse and I'm sticking to it. Wait, what were we talking about?

Rusty · 07-19-2021, 03:51 PM

Quote:

Originally Posted by The Weapon

Happy to report my temps have dropped about 20*.

Took a drive in stop and go traffic it was about 100* out with about +65% humidity absolutely miserable and my water temps never went past 205*. Normally i'd be around 220-225 sitting in traffic even on a cool night.

Curious how much you cut the inner skin? I can see it at some angles and it kind of looks like sh!t, but i'm afraid to weaken the hood if i cut it more.

Also the rivets suck a$$. they kept breaking on me did you guys have that problem?

Did you use any kind of sealant or double side stick tape? I thought about it after the fact when i washed it saw how much water collected between the frame of the vents.

Thanks again
TW

Yes the hood is aluminum.

You have to cut through the bracing under the skin. No way out of it. You got 2 different rivets with the vents. The shorter ones are aluminum. The longer ones are steel. Use the short ones where you are just riveting through the vent and the skin. Use the longer ones where you are riveting through the vent, skin and bracing. I've been involved with about 7 sets of vent installs. Tip, if you can, just rivet through the vent and skin. Going through the bracing too is tough. You can go to a body shop and get some of the putty they use to hold body panels together and stuff it between the bracing and skin.

I make rain shields that go under the vent to help redirect most of the water. The water that goes through the vents get directed to the front of the motor. You still have air flow out at speed. They are held in place with zip-ties. I've made over 20 sets of them so far. Never had a negative comment on them. No buddy has said anything to me.

The Weapon · 07-19-2021, 04:10 PM

Yep, i did cut the skin but i kept it cut to the same size opening as the top. I was thinking of cutting it more so you wouldn't see it through the vents at some angles. I just didn't want to cut too much and my hood become all floppy or something.

And yes I did paint the edges to be safe and for looks.

I noticed no water touched the engine when i washed it. It fell between the front and radiator, but i can't drive my car in any heavy rains anyways. I'm too afraid to hydrolock my motor with the turbo on the bottom. In AZ when it does rain it freaken floods bad like I get literally surrounded by rushing water around my home. Otherwise we are dry.

What i was referring to is the water that pisses out from the vent between the lip and hood. I was thinking of using some 3m double side stick tape similar to what's on the rear lip to help not collect so much water under there when i wash the car.

Rusty just out of curiosity can you show me your shields you made and How muchy?

Rusty · 07-19-2021, 04:21 PM

Quote:

Originally Posted by The Weapon

Yep, i did cut the skin but i kept it cut to the same size opening as the top. I was thinking of cutting it more so you wouldn't see it through the vents at some angles. I just didn't want to cut too much and my hood become all floppy or something.

And yes I did paint the edges to be safe and for looks.

I noticed no water touched the engine when i washed it. It fell between the front and radiator, but i can't drive my car in any heavy rains anyways. I'm too afraid to hydrolock my motor with the turbo on the bottom. In AZ when it does rain it freaken floods bad like I get literally surrounded by rushing water around my home. Otherwise we are dry.

What i was referring to is the water that pisses out from the vent between the lip and hood. I was thinking of using some 3m double side stick tape similar to what's on the rear lip to help not collect so much water under there when i wash the car.

Rusty just out of curiosity can you show me your shields you made and How muchy?

Can't find my pic's on them. But I am starting to make the center shields for ZS. When I get those made. I'll take some pic's of them. Prices. A full set of the center and outer vents is $60.00 plus shipping. They are made out of aluminum. I paint them with Plastic-Dip. Seems to hold up the best.

Hotrodz · 07-19-2021, 05:05 PM

I have had the vents since the beginning. I think I was the first one to get them installed after the first set was installed by Trackspec. To be honest they drain really well. I have run them in the rain and I was surprised how little water if any got in the bay. I washed my car without covering the vents and placed towels over the motor and again not much water at all. I think the biggest need is if the car is sitting for a prolong period of time in the rain. Fork up the payola and get a set of Rusty Rain Shields. I have a set!!!

Sent from my SM-G965U using Tapatalk

07-19-2021, 04:10 PM	#159 (permalink)
The Weapon Enthusiast Member Join Date: Nov 2008 Location: Tucson, AZ Posts: 286 Drives: 370Z Tour/Sport Blk Rep Power: 3372	Yep, i did cut the skin but i kept it cut to the same size opening as the top. I was thinking of cutting it more so you wouldn't see it through the vents at some angles. I just didn't want to cut too much and my hood become all floppy or something. And yes I did paint the edges to be safe and for looks. I noticed no water touched the engine when i washed it. It fell between the front and radiator, but i can't drive my car in any heavy rains anyways. I'm too afraid to hydrolock my motor with the turbo on the bottom. In AZ when it does rain it freaken floods bad like I get literally surrounded by rushing water around my home. Otherwise we are dry. What i was referring to is the water that pisses out from the vent between the lip and hood. I was thinking of using some 3m double side stick tape similar to what's on the rear lip to help not collect so much water under there when i wash the car. Rusty just out of curiosity can you show me your shields you made and How muchy? __________________ Boosted Performance Comp Turbo - Tuner- CJM Fuel Return- Modified Berk CBE- ZSpeed Stage 4 Clutch - Southbend Flywheel - Tuned by Seb ~650whp - HKS Coilovers - SPL - Focal Audio 4 way Active - Audiocontrol DSP - Work CR 2P

07-19-2021, 05:05 PM	#161 (permalink)
Hotrodz A True Z Fanatic Join Date: Aug 2012 Location: NW, AZ Posts: 9,330 Drives: 10 Nissan 370z Nismo Rep Power: 2684385	I have had the vents since the beginning. I think I was the first one to get them installed after the first set was installed by Trackspec. To be honest they drain really well. I have run them in the rain and I was surprised how little water if any got in the bay. I washed my car without covering the vents and placed towels over the motor and again not much water at all. I think the biggest need is if the car is sitting for a prolong period of time in the rain. Fork up the payola and get a set of Rusty Rain Shields. I have a set!!! Sent from my SM-G965U using Tapatalk The Weapon, FL 4Motion, Rusty and 2 others like this. __________________ *Fast Intentions TT Installed and Tuned by Seb at SpecialtyZ 610whp 560tq:\|Fast Intentions 3" TT-TDX*\|SpecialtyZ/Fast Intentions 72 Row Oil Cooler\|SZ 6 Puck Clutch & Flywheel\|3GsCustoms\|Z1\|Wavetrac\|Hotchkis\|Whiteline \|Blitz\|Fortune Auto 500\|Fujimura\|SPL\|H&R\|TK\|TWM\|RPM Rollbar\|Sparco\|Next Level Performance\|TrackSpec\|AeroFlow Dynamics\|Pioneer\|

07-19-2021, 03:09 PM	#155 (permalink)
THE BULL Base Member Join Date: Apr 2021 Location: Florida Posts: 217 Drives: G37S Rep Power: 26848	On another note, any of y'all running undershields? I feel as even aftermarket shields should have bigger louvers after the radiator. I installed a homemade shield and cooling efficiency took a small dip but hood doesnt dance at high speeds.