Yay! Trackspec!

Rusty · 08-20-2018, 05:57 PM

Quote:

Originally Posted by OhioYJ

Did your temps change much after your rain guards? They have to be block some air flow. Or is the plan to remove them say for track days?

My garage is already full, so my Z sits outside (and daily driven), but I haven't really been too concerned about it. I went over the connectors with dielectric grease, even though they were weather tight connectors. Some of the exposed bolts I removed and added some "water proof" grease as anti seize. Over all the only problem I've noticed is the longer rivets were not entirely stainless, the center was regular mild steel and rusted. Ive since filled the center of the rivets with silicone to seal them, but unfortunately it caused some rust discoloration around a couple rivets.

The only time I install my rain shields is when I wash the Z, or I know if it's going to be raining. The shields still let air flow. But not as much.

Quicksilvers · 08-21-2018, 04:12 AM

The Track Spec Motorsport hood vents are a proven modification that works and I give them a lot of credit for coming out with them and manufacturing them for our vehicles. Engine water and oil temperatures will drop about 10F-15F while street driving and at least 15F-20F on the track. You will feel the heat pouring out of them when you are at stop. Thank you Rusty for helping the Z community with the water/rain shields rep for you.

Even with the water/rain shields installed you will see an improvement on the street or track. Also the current market price on sheet aluminum is not cheap.

Rusty · 08-21-2018, 01:10 PM

Quote:

Originally Posted by Quicksilvers

The Track Spec Motorsport hood vents are a proven modification that works and I give them a lot of credit for coming out with them and manufacturing them for our vehicles. Engine water and oil temperatures will drop about 10F-15F while street driving and at least 15F-20F on the track. You will feel the heat pouring out of them when you are at stop. Thank you Rusty for helping the Z community with the water/rain shields rep for you.

Even with the water/rain shields installed you will see an improvement on the street or track. Also the current market price on sheet aluminum is not cheap.

Felix 808 · 08-24-2018, 12:45 PM

Quote:

Originally Posted by Rusty

Side vents installed.

Great job Rusty. Looks a lot like the Corvette hood. Am I going to have to re-cut my hood now

Rusty · 08-24-2018, 03:35 PM

Quote:

Originally Posted by Felix 808

Great job Rusty. Looks a lot like the Corvette hood. Am I going to have to re-cut my hood now

Felix 808 · 08-24-2018, 04:01 PM

Quote:

Originally Posted by Rusty

From this

To this

Rusty · 08-24-2018, 04:13 PM

Thought that was your hood for a minute or so. Then I seen the leather motorcycle jacket hanging up, and the target on the garage door.

Felix 808 · 08-24-2018, 04:19 PM

Quote:

Originally Posted by Rusty

Thought that was your hood for a minute or so. Then I seen the leather motorcycle jacket hanging up, and the target on the garage door.

Nope, my leathers were Blue, Black & White Zuki gear and I would never paint my car Gun Metallic

. Now days all I have are cruizers so just a Hi-way 21 Gunner Jacket hangs in the garage. Getting old sucks, but it beats the alterantive.

Nope I'm going to leave the Naca ducts, besides I almost never drive the thing. Too many vehicles not enough time or butts

Rusty · 08-24-2018, 04:45 PM

Quote:

Originally Posted by Felix 808

Nope, my leathers were Blue, Black & White Zuki gear and I would never paint my car charcoal

. Now days all I have are cruizers so just a Hi-way 21 Gunner Jacket hangs in the garage. Getting old sucks, but it beats the alterantive.

Nope I'm going to leave the Naca ducts, besides I almost never drive the thing. Too many vehicles not enough time or butts

Try this. Motorhome, PowerWagon, Grand Cherokee, VFR, and the Z. Pick one?

It's Gun Metallic, not Charcoal.

My leathers are a 2 piece Alpinestars, Shoei X11 helmet, Held gloves, and Alpinestar touring boots.

redondoaveb · 06-28-2019, 08:24 PM

Look how far back these Trackspec side vents are set.
https://www.instagram.com/p/BzRZhDSH...=1w9tdvjh2w1eo

Hotrodz · 06-28-2019, 08:47 PM

Quote:

Originally Posted by redondoaveb

Look how far back these Trackspec side vents are set.

https://www.instagram.com/p/BzRZhDSH...=1w9tdvjh2w1eo

They should only be 13" from the front of the hood lol.

Sent from my SM-G965U using Tapatalk

redondoaveb · 06-28-2019, 08:59 PM

Quote:

Originally Posted by Hotrodz

They should only be 13" from the front of the hood lol.

Sent from my SM-G965U using Tapatalk

Maybe in Europe front means rear, kind of like they drive on the wrong side of the road.

Hotrodz · 06-28-2019, 09:18 PM

Quote:

Originally Posted by redondoaveb

Maybe in Europe front means rear, kind of like they drive on the wrong side of the road.

Yeah then add in the metric versus empirical conversion Queens English and chit gets all fucky pood up!

Sent from my SM-G965U using Tapatalk

Rusty · 06-29-2019, 12:00 AM

Quote:

Originally Posted by Hotrodz

They should only be 13" from the front of the hood lol.

Sent from my SM-G965U using Tapatalk

My center is "15, and the sides are 17".

Hotrodz · 06-29-2019, 10:42 AM

Quote:

Originally Posted by Rusty

My center is "15, and the sides are 17".

You are correct...I just went back to the previous post I made and I said it was 15". LOL, shrinkage is bad deal!

Sent from my SM-G965U using Tapatalk

08-21-2018, 04:12 AM	#92 (permalink)
Quicksilvers A True Z Fanatic Join Date: May 2017 Location: Atlanta, GA Posts: 2,039 Drives: 2017 370z Rep Power: 25463	The Track Spec Motorsport hood vents are a proven modification that works and I give them a lot of credit for coming out with them and manufacturing them for our vehicles. Engine water and oil temperatures will drop about 10F-15F while street driving and at least 15F-20F on the track. You will feel the heat pouring out of them when you are at stop. Thank you Rusty for helping the Z community with the water/rain shields rep for you. Even with the water/rain shields installed you will see an improvement on the street or track. Also the current market price on sheet aluminum is not cheap. Rusty and Hotrodz like this.

08-24-2018, 04:13 PM	#97 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,279 Drives: 2011 Nismo GM 6M Rep Power: 2684438	Thought that was your hood for a minute or so. Then I seen the leather motorcycle jacket hanging up, and the target on the garage door. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html