Yay! Trackspec!

ihiryu · 12-27-2017, 12:26 PM

I got my vents today! Can't wait to get it put on nowwwwww

Chuck33079 · 12-27-2017, 12:46 PM

Yeah, mine are sitting in my garage waiting for me to grow the balls to start cutting holes in my hood.

StevenSlice · 12-27-2017, 12:47 PM

After seeing Eagle's car in person, I REALLY want them now. Just put the blindfold on and start cutting chuck.

Chuck33079 · 12-27-2017, 12:50 PM

Quote:

Originally Posted by StevenSlice

After seeing Eagle's car in person, I REALLY want them now. Just put the blindfold on and start cutting chuck.

The problem is that the cost of a replacement hood is more than the cost of having someone who knows what they're doing put them in.

StevenSlice · 12-27-2017, 01:46 PM

Quote:

Originally Posted by Chuck33079

The problem is that the cost of a replacement hood is more than the cost of having someone who knows what they're doing put them in.

Yeah I feel that. But my cars going to get cut up and welded on so i think the level of care is a bit less for me

theDreamer · 12-27-2017, 02:29 PM

Quote:

Originally Posted by Chuck33079

The problem is that the cost of a replacement hood is more than the cost of having someone who knows what they're doing put them in.

I would say cannot be worse than putting in the SC but that was my car not yours.
If you want I will start cutting for you.

Chuck33079 · 12-27-2017, 02:50 PM

Quote:

Originally Posted by theDreamer

I would say cannot be worse than putting in the SC but that was my car not yours.
If you want I will start cutting for you.

I'm absolutely convinced that only the first cut will be nerve wracking. Once you're committed it's probably a breeze.

sx moneypit · 12-27-2017, 04:11 PM

Quote:

Originally Posted by Chuck33079

I'm absolutely convinced that only the first cut will be nerve wracking. Once you're committed it's probably a breeze.

God-Speed · 12-27-2017, 04:39 PM

Just remember, "measure twice, cut once". Ok Measure three times!!

Hotrodz · 12-27-2017, 06:52 PM

I took mine to a body shop since I have no skills!

Sent from my SM-N910P using Tapatalk

jchammond · 12-27-2017, 07:07 PM

Quote:

Originally Posted by God-Speed

Just remember, "measure twice, cut once". Ok Measure three times!!

Resembles what i did before ordering wheel's...But measured at least 3-Dozen Times.

eliboy · 12-27-2017, 08:25 PM

I am in the same spot, I have them and don’t know if to do it myself. Can you guys give some tips? Like the best location on the hood? What to use to cut it? And anything else that can help. Thanks!!!

Sent from my iPhone using Tapatalk

jchammond · 12-27-2017, 08:34 PM

This Gal can help...

Sent from my iPhone using Tapatalk

madwi · 12-27-2017, 09:08 PM

I have a spare hood to practice on. If it warms up a little bit maybe I can get EW to help document the install or if it goes terribly wrong, what not to do.

BGTV8 · 12-27-2017, 10:04 PM

Can you tell me the distance from the leading edge of the front of the hood to the rear of the centre vent .. I have an 6 x ITB kit for my car and I suspect there won;t be clearance with the centre vent fitted BUT it would be useful to know

12-27-2017, 12:26 PM	#1 (permalink)
ihiryu Base Member Join Date: Oct 2016 Location: TX Posts: 141 Drives: 2013 Nismo 370z 6MT Rep Power: 34	Yay! Trackspec! I got my vents today! Can't wait to get it put on nowwwwww TechnicZ likes this.

12-27-2017, 12:46 PM	#2 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29539	Yeah, mine are sitting in my garage waiting for me to grow the balls to start cutting holes in my hood. Rusty likes this. __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

12-27-2017, 12:47 PM	#3 (permalink)
StevenSlice Track Member Join Date: Jun 2017 Location: Lompoc, CA Age: 27 Posts: 502 Drives: Like an idiot Rep Power: 46199	After seeing Eagle's car in person, I REALLY want them now. Just put the blindfold on and start cutting chuck. Eagle likes this. __________________ Kansei Corsa \| Endless \| Winmax \| Hotchkis \| ISR Performance \| SPL Parts \| Voodoo13 \|Sabelt \| PowerTrix \| Corner 3 \|

12-27-2017, 04:39 PM	#9 (permalink)
God-Speed A True Z Fanatic Join Date: Sep 2010 Location: Austin, Tx. Posts: 4,365 Drives: Prototype Rep Power: 2684377	Just remember, "measure twice, cut once". Ok Measure three times!! Felix 808, TMRN370z and jchammond like this.

12-27-2017, 06:52 PM	#10 (permalink)
Hotrodz A True Z Fanatic Join Date: Aug 2012 Location: NW, AZ Posts: 9,330 Drives: 10 Nissan 370z Nismo Rep Power: 2684385	I took mine to a body shop since I have no skills! Sent from my SM-N910P using Tapatalk JARblue, cv129, GaleForce and 9 others like this. __________________ *Fast Intentions TT Installed and Tuned by Seb at SpecialtyZ 610whp 560tq:\|Fast Intentions 3" TT-TDX*\|SpecialtyZ/Fast Intentions 72 Row Oil Cooler\|SZ 6 Puck Clutch & Flywheel\|3GsCustoms\|Z1\|Wavetrac\|Hotchkis\|Whiteline \|Blitz\|Fortune Auto 500\|Fujimura\|SPL\|H&R\|TK\|TWM\|RPM Rollbar\|Sparco\|Next Level Performance\|TrackSpec\|AeroFlow Dynamics\|Pioneer\|

12-27-2017, 08:25 PM	#12 (permalink)
eliboy Base Member Join Date: Sep 2015 Location: Wylie, TX Posts: 122 Drives: 14 Nissan 370Z Nismo Rep Power: 10	I am in the same spot, I have them and don’t know if to do it myself. Can you guys give some tips? Like the best location on the hood? What to use to cut it? And anything else that can help. Thanks!!! Sent from my iPhone using Tapatalk

12-27-2017, 08:34 PM	#13 (permalink)
jchammond A True Z Fanatic Join Date: Nov 2014 Location: South Carolina Age: 58 Posts: 15,204 Drives: 13’ 370Z TS 7A/T Rep Power: 2684395	This Gal can help... Sent from my iPhone using Tapatalk JARblue, Zoren 370, Hotrodz and 1 others like this. __________________ MazWorx built long block \| FI-TT-100 Stage 2.75 \| IPT built 7A/T http://www.the370z.com/members-370z-...s-musings.html

12-27-2017, 09:08 PM	#14 (permalink)
madwi A True Z Fanatic Join Date: Sep 2012 Location: West Michigan Posts: 31,410 Drives: Granma red Z Rep Power: 2684429	I have a spare hood to practice on. If it warms up a little bit maybe I can get EW to help document the install or if it goes terribly wrong, what not to do. Hotrodz and eliboy like this.

12-27-2017, 10:04 PM	#15 (permalink)
BGTV8 A True Z Fanatic Join Date: Dec 2009 Location: 03350 Australia Posts: 1,514 Drives: 09 Nissan 370Z M6 Rep Power: 39973	Can you tell me the distance from the leading edge of the front of the hood to the rear of the centre vent .. I have an 6 x ITB kit for my car and I suspect there won;t be clearance with the centre vent fitted BUT it would be useful to know