greddy rocket bunny LED wiring help
 

Hi, I'm trying to figure out how to wire these DRL, but it's a little more confusing than I thought it would be.

These are the greddy rocket bunny LED v2 that I'm trying to hook up. There's a total of 10 LEDs, 5 per side, which fits into the 2015 Nismo Front Bumper LED brackets. These are suppose to blink with the turn signals.
https://i.imgur.com/CodUBjmh.jpg

I understand that I'm suppose to attach each LED with each black connector.
But there are 2 extra wire, 1 on each side. Which are green and biege that I'm not sure where they're suppose to go. (The DRL are suppose to blink with the turn signals. That's what I'm assuming the green/biege wires are for).
https://i.imgur.com/Gz07MiOh.jpg

Going down the chain, next to the black box there's a white wire. And I have no idea what that ones for.
https://i.imgur.com/XeydGhEh.jpg

And at the very end, theres 3 wires. Black/red/yellow. Which I'm sure are for the power supply. I've taken it to 2 shops where they had no idea how to do it without a manual (which I do not have).
https://i.imgur.com/1JKNaSah.jpg

Any insight would be much appreciated. Thanks!

Google is your friend.

Per the Rocket Bunny page:
(Edit: Click on the generic "Rocket Bunny Ver.2 - Optional DRL LED Light kit")
RED – +12V constant
Black – Ground
YELLOW – ACC
GREEN – turn signal
BROWN – turn signal
WHITE – ACC (for amber running lights option. can also be run thru a switch to change running light color)
GREY – 12V switch (causes DRL’s to flash white. recommend running thru momentary push button switch)

U r a god. Thank you so much

Just rep him.

How do u do that?