Craftsquare Carbon mirrors

Volk Z · 07-20-2017, 08:31 PM

I added a pinstripe to mine. Also covered all the red. So font is carbon and sides and rear are carbon vinyl

madwi · 07-20-2017, 09:26 PM

Stripe goes good with the seats and pearl white.

TreeSemdyZee · 07-20-2017, 09:26 PM

Like

Volk Z · 07-22-2017, 11:29 AM

Thanks guys. You know pics never do our mods justice. I appreciate the comments

CJBinder · 07-22-2017, 11:40 AM

I want these so bad. I found you can get them on https://www.japanparts.com/parts/detail/51444. For tracking is it best to get the extended arm or not?

Sent from my iPhone using Tapatalk

madwi · 07-22-2017, 03:38 PM

I believe the extended version locks into place once you set them. Would probably be ideal for the track, especially if people are walking around the vehicle often. It is a pain in the *** to get the passenger side lined up by yourself.

CJBinder · 07-22-2017, 06:07 PM

Quote:

Originally Posted by madwi

I believe the extended version locks into place once you set them. Would probably be ideal for the track, especially if people are walking around the vehicle often. It is a pain in the *** to get the passenger side lined up by yourself.

Thanks for the information, but I am a bit confused, found this on site Craft Square TCA-F / TCA-N1 (Touring Competition) Mirror with basic description of the differences.

Quote:

Installation Types

Type F
Mirror Dimensions are 183mm wide and 73mm high
Type F position is 43mm lower and the mirror is further out for good visibility.
F type Mirror has a single attachment point for a cleaner look.

Type N1 (these have a long stem)
Mirror Dimensions are 183mm wide and 73mm high
Type N1 position is 43mm higher, but brings the mirror closer.
N1 mirror has a stem that passes through the mirror case.

OPTIONS

/R-Type
This indicates a racing model option.
This option includes a specific black base and a lockable cap applied to the standard F or N1 mirror to secure the mirrors under intense vibration.

Not a big fan of the stem showing thru the top but at the same time I would figure that setup would push the mirror out farther giving a better angle but I guess it is higher up so maybe not. But I am interpreting the F type has better visibility based upon the info quoted.

Would like to make sure and get R Type option but I don't see it on the two sites. Going to inquire on extra options available.

I hate our dumbo mirrors!

Volk Z · 07-22-2017, 08:51 PM

I got them in 4 weeks from order date from rhdJapan. Both the stem style and thethe ones I have now I have owned both versions. Personally I like the no stem look better. Vision wise is the same as both are wide angle mirrors. I locked them in so they are stuck where they are at for life haha.

Took me 25 min to install and 5 min for the pun stripe2 which sets it off I feel.

I have gloss red forgestae wheels on the way ao it will all tie in

CJBinder · 07-22-2017, 08:53 PM

Quote:

Originally Posted by Volk Z

I got them in 4 weeks from order date from rhdJapan. Both the stem style and thethe ones I have now I have owned both versions. Personally I like the no stem look better. Vision wise is the same as both are wide angle mirrors. I locked them in so they are stuck where they are at for life haha.

Took me 25 min to install and 5 min for the pun stripe2 which sets it off I feel.

I have gloss red forgestae wheels on the way ao it will all tie in

Sweet so not to bad installing? I will be ordering soon. Love the look on your car. Any gotchas or things to be careful of when installing?

Sent from my iPhone using Tapatalk

McLovin2010 · 07-23-2017, 12:44 AM

But i like my heated mirrors lol, i do really dig these except the exposed screws. did you have the link for the spot to purchase these or did i miss it?

cooltoy · 07-23-2017, 01:02 AM

Post 35.

Volk Z · 07-23-2017, 11:37 AM

Quote:

Originally Posted by CJBinder

Sweet so not to bad installing? I will be ordering soon. Love the look on your car. Any gotchas or things to be careful of when installing?

Sent from my iPhone using Tapatalk

Yeah i put painters tape around the area before test fitting.
The doors have 3 screws to take out one if which is by the opening handle thebother 2 are behind a rectangle panel in the cubby area near the bottom.

Super easy to do.

Volk Z · 07-23-2017, 12:55 PM

Quote:

Originally Posted by CJBinder

Sweet so not to bad installing? I will be ordering soon. Love the look on your car. Any gotchas or things to be careful of when installing?

Sent from my iPhone using Tapatalk

Yeah i put painters tape around the area before test fitting.
The doors have 3 screws to take out one if which is by the opening handle thebother 2 are behind a rectangle panel in the cubby area near the bottom.

Super easy to do.

redondoaveb · 07-23-2017, 10:37 PM

I just ordered a pair of the F type from rhdjapan. I'm so sick of trying to see around the stock mirrors.

CJBinder · 07-24-2017, 07:15 AM

I sent an email to Japanparts site and there is a way to add the extra options like R type add on and 500s mirror type. Just FYI

Sent from my iPhone using Tapatalk

07-20-2017, 09:26 PM	#32 (permalink)
madwi A True Z Fanatic Join Date: Sep 2012 Location: West Michigan Posts: 31,410 Drives: Granma red Z Rep Power: 2684429	Stripe goes good with the seats and pearl white. Volk Z likes this.

07-20-2017, 09:26 PM	#33 (permalink)
TreeSemdyZee Premium Member Join Date: Dec 2009 Location: Kentuck-IANA Age: 60 Posts: 4,886 Drives: '09 370 & ‘14 Juke Rep Power: 27409	Like Volk Z likes this. __________________ Borla S-Type \| Motordyne \| Z1 (lots) \| South Bend \| K&N \| Nismo/Nismo S-Tune \| Eibach \| Aerojacket \| Fujimara \| Spl \| ZSpeed Performance \| Kenwood-Infinity-Sound Ordnance \| Whiteline \| Ecutek \| Hotchkis \| Clazzio \| VQ Vortex \|Morimoto XB \|Dynosty Tune 329.64hp 265.73 ft/lb

07-22-2017, 11:29 AM	#34 (permalink)
Volk Z A True Z Fanatic Join Date: Aug 2011 Location: Laguna Beach, CA Posts: 2,214 Drives: Nismo Z Rep Power: 3066	Thanks guys. You know pics never do our mods justice. I appreciate the comments __________________ AMUSE * TOMEI * STILLEN * CRAFTSQUARE RECARO * 3M * TOP SECRET * SLICKCARBON

07-22-2017, 11:40 AM	#35 (permalink)
CJBinder Enthusiast Member Join Date: May 2010 Location: Omaha NE Posts: 272 Drives: 09 370Z PG M6 Rep Power: 25	I want these so bad. I found you can get them on https://www.japanparts.com/parts/detail/51444. For tracking is it best to get the extended arm or not? Sent from my iPhone using Tapatalk __________________ Injen cold air intakes, Ported upper and lower manifolds, OS Giken LSD, F1 Long Tube Headers, Magnaflow CBE. Natural Baby Last edited by CJBinder; 07-22-2017 at 03:24 PM.

07-22-2017, 08:51 PM	#38 (permalink)
Volk Z A True Z Fanatic Join Date: Aug 2011 Location: Laguna Beach, CA Posts: 2,214 Drives: Nismo Z Rep Power: 3066	I got them in 4 weeks from order date from rhdJapan. Both the stem style and thethe ones I have now I have owned both versions. Personally I like the no stem look better. Vision wise is the same as both are wide angle mirrors. I locked them in so they are stuck where they are at for life haha. Took me 25 min to install and 5 min for the pun stripe2 which sets it off I feel. I have gloss red forgestae wheels on the way ao it will all tie in __________________ AMUSE * TOMEI * STILLEN * CRAFTSQUARE RECARO * 3M * TOP SECRET * SLICKCARBON

07-22-2017, 03:38 PM	#36 (permalink)
madwi A True Z Fanatic Join Date: Sep 2012 Location: West Michigan Posts: 31,410 Drives: Granma red Z Rep Power: 2684429	I believe the extended version locks into place once you set them. Would probably be ideal for the track, especially if people are walking around the vehicle often. It is a pain in the *** to get the passenger side lined up by yourself.

07-23-2017, 12:44 AM	#40 (permalink)
McLovin2010 Base Member Join Date: Aug 2014 Location: Yorktown, VA Posts: 68 Drives: 15 370z white manual Rep Power: 40	But i like my heated mirrors lol, i do really dig these except the exposed screws. did you have the link for the spot to purchase these or did i miss it? __________________ Fast Intentions stage 2 TT kit\| Specialty Z clutch kit\|FI 34 Row oil cooler\|Fast 500E fuel return \|Aquamist Methanol kit\|3.3 Quaife diff\|Ported Manifolds\|Poly mounts\|Defi 3 gauge cluster swap\| 3in Motordyne x-pipe Catback \|4100Nex\|JL XD1000/5v2 \|Fx165 Focal\|JL 10w3v3\|

07-23-2017, 01:02 AM	#41 (permalink)
cooltoy Elite Member Join Date: Jun 2012 Location: Calgary Posts: 13,978 Drives: 14 PW 370Z S/T MT Rep Power: 243722	Post 35. __________________ Member of kenchan's "photoshopped mods" and "proper offsets" gang.

07-23-2017, 10:37 PM	#44 (permalink)
redondoaveb A True Z Fanatic Join Date: Apr 2017 Location: So. Commiefornia Posts: 6,370 Drives: 2014 Nismo Gunmetal Rep Power: 2684374	I just ordered a pair of the F type from rhdjapan. I'm so sick of trying to see around the stock mirrors. Volk Z and madwi like this.

07-24-2017, 07:15 AM	#45 (permalink)
CJBinder Enthusiast Member Join Date: May 2010 Location: Omaha NE Posts: 272 Drives: 09 370Z PG M6 Rep Power: 25	I sent an email to Japanparts site and there is a way to add the extra options like R type add on and 500s mirror type. Just FYI Sent from my iPhone using Tapatalk Volk Z likes this. __________________ Injen cold air intakes, Ported upper and lower manifolds, OS Giken LSD, F1 Long Tube Headers, Magnaflow CBE. Natural Baby

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] FS: CraftSquare JDM Side Mirrors	BeemaaZ	Parts for sale (Private Classifieds)	17	09-20-2014 03:14 PM
[WTB] Craftsquare CF Mirrors	Ni55anPat	Parts for sale (Private Classifieds)	5	06-13-2014 04:26 PM
[FOR SALE] Craftsquare Tca-N1 Carbon Fiber Mirrors with Anti-Glare Blue Glass	ckim64	Parts for sale (Private Classifieds)	10	03-05-2014 01:44 AM
[FOR SALE] CRAFTSQUARE N1 LONG ARM mirrors...	simota1	Parts for sale (Private Classifieds)	10	08-30-2013 05:19 PM
Craftsquare TCA-RF Mirrors Released!	SE	Exterior & Interior	0	01-31-2011 10:35 PM