Vented Hood Inserts Intrest

cooltoy · 11-05-2017, 11:09 AM

Quote:

Originally Posted by AlWakRa

You are right about the direction of vents, looking at other products, they flow well with hood lines, and those 370 vents, if they are turned they will flow with our hoods as well.

Their Insta
https://www.instagram.com/trackspecmotorsports/

The direction is correct, but I think Hotrodz has them upside down. Those vent support bars need to be pointing into the hood. If the vents are turned upside down, then I think they will also need to be turned 180°, and will follow the hood lines. Or I could be wrong since I am not there.

Hotrodz · 11-05-2017, 11:21 AM

Quote:

Originally Posted by littlejuanito

Not if you flip the vents upside down. But yes the larger part goes upfront. Either way, I'm sure they gonna look awesome once installed. Do these close for washing?

No...

Sent from my SM-N910P using Tapatalk

Hotrodz · 11-05-2017, 11:24 AM

Quote:

Originally Posted by cooltoy

The direction is correct, but I think Hotrodz has them upside down. Those vent support bars need to be pointing into the hood. If the vents are turned upside down, then I think they will also need to be turned 180°, and will follow the hood lines. Or I could be wrong since I am not there.

That may be correct...I am not at home so I will check this afternoon.

Sent from my SM-N910P using Tapatalk

Rusty · 11-05-2017, 02:00 PM

Hey you disfunctional unit.

After you get home from your ball game. Flip the vents over so the the center bar is down. Position the middle vent with the small side in the front. Think the small vents need to be swapped side the side. The left on the right and right on the left. See how that looks. From looking at the new pictures. You have them up side down and asss backwards.

sirnixalot · 11-05-2017, 03:48 PM

Can’t wait to see how they look installed in the right orientation. Will you be mounting them on the top or from the bottom?

OhioYJ · 11-05-2017, 04:37 PM

These are made out of aluminium?

How soon before we can actually order them?

Hotrodz · 11-05-2017, 05:26 PM

Quote:

Originally Posted by Rusty

Hey you disfunctional unit.

After you get home from your ball game. Flip the vents over so the the center bar is down. Position the middle vent with the small side in the front. Think the small vents need to be swapped side the side. The left on the right and right on the left. See how that looks. From looking at the new pictures. You have them up side down and asss backwards.

So let me get on the band wagon you "Fart Smuckers!" Yeah the orientation was right but I dyslexia was in full force as I did place them upside down LMAO. So we all win! And that is why I did not go into engineering and it has been a long time since I stayed at a Holiday Inn Express!

Thanks for all your patience and feel free to continue to pile on as I deserve it!

KF365 · 11-05-2017, 06:09 PM

quick question
these look great just wondering if he did any pressure testing to see if these points are actually low pressure areas so we can guarantee air comes out

Hotrodz · 11-05-2017, 06:16 PM

Quote:

Originally Posted by OhioYJ

These are made out of aluminium? Yes

How soon before we can actually order them?

I do not know at this time!

Hotrodz · 11-05-2017, 06:19 PM

Quote:

Originally Posted by KF365

quick question
these look great just wondering if he did any pressure testing to see if these points are actually low pressure areas so we can guarantee air comes out

I don't know if any actual test were done or it was computer simulated. When I looked at where the SpecTrac vents line up compared to my Fugimora hood they are spot on. The only difference is the SpecTrac vents are way bigger.

Rusty · 11-05-2017, 06:22 PM

Quote:

Originally Posted by Hotrodz

So let me get on the band wagon you "Fart Smuckers!" Yeah the orientation was right but I dyslexia was in full force as I did place them upside down LMAO. So we all win! And that is why I did not go into engineering and it has been a long time since I stayed at a Holiday Inn Express!

Thanks for all your patience and feel free to continue to pile on as I deserve it!

OhioYJ · 11-05-2017, 08:01 PM

Quote:

Originally Posted by Hotrodz

I do not know at this time!

Thanks. I was looking at some pictures on a Corvette forum and they looked aluminum, but oddly enough I couldn't find this info on their website. Perhaps I overlooked it.

I'm interested, let us know when they actually have them ready.

Hotrodz · 11-05-2017, 08:24 PM

Quote:

Originally Posted by OhioYJ

Thanks. I was looking at some pictures on a Corvette forum and they looked aluminum, but oddly enough I couldn't find this info on their website. Perhaps I overlooked it.

I'm interested, let us know when they actually have them ready.

They are made of high grade aluminum!

Spooler · 11-06-2017, 01:04 AM

Those look real nice, even if they are upside down. My hood needs a repaint anyway due to some rock chips and freaking luv bugs. I need to clear bra the whole dang car.

fmayi1101 · 11-06-2017, 06:24 AM

Quote:

Originally Posted by sirnixalot

Can’t wait to see how they look installed in the right orientation. Will you be mounting them on the top or from the bottom?

Good question what he said lol.

Sent from my iPhone using Tapatalk

11-05-2017, 02:00 PM	#409 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,190 Drives: 2011 Nismo GM 6M Rep Power: 2684437	Hey you disfunctional unit. After you get home from your ball game. Flip the vents over so the the center bar is down. Position the middle vent with the small side in the front. Think the small vents need to be swapped side the side. The left on the right and right on the left. See how that looks. From looking at the new pictures. You have them up side down and asss backwards. JARblue, DarkJak, cooltoy and 3 others like this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

11-05-2017, 03:48 PM	#410 (permalink)
sirnixalot Track Member Join Date: May 2017 Location: Cayman Islands Posts: 685 Drives: 2010 370Z Rep Power: 57454	Can’t wait to see how they look installed in the right orientation. Will you be mounting them on the top or from the bottom? __________________ 2010 Sport - LS3 swap loading 2012 Frontier - BTWTuning VK56DE swap

11-06-2017, 01:04 AM	#419 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,803 Drives: 2013 Nismo 370z Rep Power: 2684392	Those look real nice, even if they are upside down. My hood needs a repaint anyway due to some rock chips and freaking luv bugs. I need to clear bra the whole dang car. Hotrodz likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[WTB] CarbonSignal hood inserts	edzilla123	Parts for sale (Private Classifieds)	0	04-28-2017 10:00 AM
Vented Fender inserts	docabramson	Exterior & Interior	2	09-01-2015 03:35 AM
CarbonSignal V1 hood inserts	A.J@CarbonSignal	Body Interior/Exterior	48	07-13-2014 01:04 AM
[WTB] vented hood	SCORPION	Parts for sale (Private Classifieds)	0	02-10-2014 10:32 PM

11-05-2017, 04:37 PM	#411 (permalink)
OhioYJ Enthusiast Member Join Date: Nov 2016 Location: Ohio Posts: 261 Drives: 2016 370Z Rep Power: 953	These are made out of aluminium? How soon before we can actually order them?

11-05-2017, 06:09 PM	#413 (permalink)
KF365 Base Member Join Date: Jun 2011 Location: Melbourne Posts: 14 Drives: 11 370Z 7AT Rep Power: 14	quick question these look great just wondering if he did any pressure testing to see if these points are actually low pressure areas so we can guarantee air comes out