Vented Hood Inserts Intrest

cooltoy · 11-09-2017, 10:12 PM

....

Quote:

Originally Posted by Hotrodz

They are made of high grade aluminum!

KF365 · 11-05-2017, 05:09 PM

quick question
these look great just wondering if he did any pressure testing to see if these points are actually low pressure areas so we can guarantee air comes out

Hotrodz · 11-05-2017, 05:19 PM

Quote:

Originally Posted by KF365

quick question
these look great just wondering if he did any pressure testing to see if these points are actually low pressure areas so we can guarantee air comes out

I don't know if any actual test were done or it was computer simulated. When I looked at where the SpecTrac vents line up compared to my Fugimora hood they are spot on. The only difference is the SpecTrac vents are way bigger.

Spooler · 11-06-2017, 12:04 AM

Those look real nice, even if they are upside down. My hood needs a repaint anyway due to some rock chips and freaking luv bugs. I need to clear bra the whole dang car.

carlitos_370z · 11-06-2017, 05:33 AM

Damn they look awesome!!!!! post some pics when installed! im interested

JARblue · 11-06-2017, 10:06 AM

What the hell is up with the orientation of the vents in the photos? They look like they were mocked up by a opossum

Hotrodz · 11-06-2017, 10:12 AM

Quote:

Originally Posted by JARblue

What the hell is up with the orientation of the vents in the photos? They look like they were mocked up by a opossum

Thanks for the support and stating the obvious lol.

I literally did not take time to do anything but pull the vents out of the box snap a few pix in between work and personal activities. The vents are awesome the owner has brain issues as you know!

Sent from my SM-N910P using Tapatalk

JARblue · 11-06-2017, 10:17 AM

Quote:

Originally Posted by Hotrodz

Thanks for the support and stating the obvious lol.

<3

Quote:

Originally Posted by Hotrodz

I literally did not take time to do anything but pull the vents out of the box snap a few pix in between work and personal activities. The vents are awesome the owner has brain issues as you know!

Well someone has to

since the resident thread troll is banned

Hotrodz · 11-06-2017, 10:20 AM

Quote:

Originally Posted by JARblue

<3

Well someone has to

since the resident thread troll is banned

LMAO....and just for everyone's information I won't be doing the installation because I would probably put them in sideways and backwards lol!

Sent from my SM-N910P using Tapatalk

redondoaveb · 11-06-2017, 10:37 AM

Quote:

Originally Posted by Hotrodz

LMAO....and just for everyone's information I won't be doing the installation because I would probably put them in sideways and backwards lol!

Sent from my SM-N910P using Tapatalk

Sideways and backwards, probably not a good selling point

Love the vents though.

Rusty · 11-06-2017, 05:40 PM

Jarblue..............Think you better slow down on your speed reading. I already beat him up on it.

Quote:

Originally Posted by Rusty

Bobby, you need to flip the vents over. And take a few other pictures. Position them how they would look on the hood.

Quote:

Originally Posted by Rusty

Think maybe he's dyslexic.

Quote:

Originally Posted by Rusty

Hey you disfunctional unit.

After you get home from your ball game. Flip the vents over so the the center bar is down. Position the middle vent with the small side in the front. Think the small vents need to be swapped side the side. The left on the right and right on the left. See how that looks. From looking at the new pictures. You have them up side down and asss backwards.

Quote:

Originally Posted by JARblue

What the hell is up with the orientation of the vents in the photos? They look like they were mocked up by a opossum

Quote:

Originally Posted by JARblue

<3

Well someone has to

since the resident thread troll is banned

Hotrodz · 11-06-2017, 05:52 PM

Quote:

Originally Posted by Rusty

Jarblue..............Think you better slow down on your speed reading. I already beat him up on it.

WTF...it's groundhog day all over again! The horror of it all!!!

Sent from my SM-N910P using Tapatalk

Kingbaby · 11-06-2017, 11:20 AM

the side vents are doing what ?

Next question is are you place it after the radiator or on top of the timing cover?

look wise it looks great ! 10/10 would rock

DarkJak · 11-06-2017, 12:00 PM

Quote:

Originally Posted by Kingbaby

the side vents are doing what ?

Next question is are you place it after the radiator or on top of the timing cover?

look wise it looks great ! 10/10 would rock

Hopefully the side vents end up over that air gap to the sides of the engine and help reduce pressure and extract hot air from that area.
Dying to see the parts installed. I didn't find any pics on the company's intagram for the Z.

Hotrodz · 11-06-2017, 04:46 PM

Quote:

Originally Posted by Kingbaby

the side vents are doing what ?

Next question is are you place it after the radiator or on top of the timing cover?

look wise it looks great ! 10/10 would rock

Quote:

Originally Posted by DarkJak

Hopefully the side vents end up over that air gap to the sides of the engine and help reduce pressure and extract hot air from that area.
Dying to see the parts installed. I didn't find any pics on the company's intagram for the Z.

What DarkJak said and yes the hood vent leading edge should be just about 13" to 15" from the front the hood which would place it just beyond the radiator. That is if you trust my measurements. I actually took measurements from Fugi hood vents and the placement of the radiator from the front of the hood.

Sent from my SM-N910P using Tapatalk

11-06-2017, 10:06 AM	#6 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 44 Posts: 36,450 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684441	What the hell is up with the orientation of the vents in the photos? They look like they were mocked up by a opossum __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[WTB] CarbonSignal hood inserts	edzilla123	Parts for sale (Private Classifieds)	0	04-28-2017 09:00 AM
Vented Fender inserts	docabramson	Exterior & Interior	2	09-01-2015 02:35 AM
CarbonSignal V1 hood inserts	A.J@CarbonSignal	Body Interior/Exterior	48	07-13-2014 12:04 AM
[WTB] vented hood	SCORPION	Parts for sale (Private Classifieds)	0	02-10-2014 09:32 PM

11-05-2017, 05:09 PM	#2 (permalink)
KF365 Base Member Join Date: Jun 2011 Location: Melbourne Posts: 14 Drives: 11 370Z 7AT Rep Power: 14	quick question these look great just wondering if he did any pressure testing to see if these points are actually low pressure areas so we can guarantee air comes out

11-06-2017, 12:04 AM	#4 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,981 Drives: 2013 Nismo 370z Rep Power: 2684392	Those look real nice, even if they are upside down. My hood needs a repaint anyway due to some rock chips and freaking luv bugs. I need to clear bra the whole dang car.

11-06-2017, 05:33 AM	#5 (permalink)
carlitos_370z A True Z Fanatic Join Date: Jul 2013 Location: Puerto Rico Posts: 7,157 Drives: 13 Nissan 370Z SP M6 Rep Power: 7586	Damn they look awesome!!!!! post some pics when installed! im interested