Finally got around to testing this new product out. It should be noted that my Z is out of commission due to an oil leak. Therefore I had to take
|
|
LinkBack | Thread Tools | Display Modes |
04-02-2023, 06:48 PM | #241 (permalink) |
A True Z Fanatic
Join Date: Nov 2009
Location: Western Maryland
Posts: 1,280
Drives: Wife crazy & 09 370Z
Rep Power: 105454 |
Finally got around to testing this new product out. It should be noted that my Z is out of commission due to an oil leak. Therefore I had to take the pictures in my garage. I rolled down the windows, opened the doors, turned on all my garage lights and had both garage doors open to let in as much light as possible. I also used a work lamp to produce even more light. Because of the issue, I wasn't able to test this out in direct sunlight. So I don't know if it will get sticky when it gets hot.
The product says to spray it directly on the dash. I only wanted to apply it to a specific area, so I opted to spray it directly on a microfiber towel and then wipe the dash with it. Photo 1 The products I used Photo 2 The dash before the application Photo 3 The first application Photo 4 10 minutes after application Photo 5 3 hours after second application Overall I'm pretty happy with the results so far. I'll know more once I can get the car out of the garage and in to direct sunlight.
__________________
~Rob -DD Air Guide, Stillen G3 CAIs, 63mm Throttle Bodies, Motordyne M370, Berk HFCs, FI TDX CBE (non-res, CF), Sprint booster v3, Ecutek Dyno Tuned, and the list goes on... Last edited by Spartan 1771; 04-02-2023 at 09:41 PM. |
04-05-2023, 06:27 PM | #245 (permalink) |
A True Z Fanatic
Join Date: Nov 2009
Location: Western Maryland
Posts: 1,280
Drives: Wife crazy & 09 370Z
Rep Power: 105454 |
Three days later and it still looks pretty good. I'm looking forward to getting the car back in to the sunlight to see how it holds up under those conditions.
Sent from my SM-G781U using Tapatalk
__________________
~Rob -DD Air Guide, Stillen G3 CAIs, 63mm Throttle Bodies, Motordyne M370, Berk HFCs, FI TDX CBE (non-res, CF), Sprint booster v3, Ecutek Dyno Tuned, and the list goes on... |
04-13-2023, 12:20 AM | #247 (permalink) |
Track Member
Join Date: Oct 2016
Location: OKC
Posts: 786
Drives: 2010 touring
Rep Power: 7842 |
I ve been driving mine a few weeks now and even made a trip to the track and the dash looks perfect!
Photo is a little grainy but it is the same as the apillar in the photo. No oil slicks on it thank god.
__________________
NA on E85 - 12.402 @ 112 mph 100 shot E85 - 11.589 @ 117 mph JWT C2 cams rev Base Circle & Titan Valves Last edited by SG4247; 04-13-2023 at 12:23 AM. |
04-16-2023, 04:03 PM | #248 (permalink) |
A True Z Fanatic
Join Date: Nov 2009
Location: Western Maryland
Posts: 1,280
Drives: Wife crazy & 09 370Z
Rep Power: 105454 |
It's been two weeks since I treated a section of he passenger side dash with Optimum. It's been in the garage this entire time and still looks good.
Pic 1 - Immediately before pulling it out of the cool garage Pic 2 - In the 85 degree sun for 20 minutes. The treated and untreated areas both got sticky again. Pic 3 - After being back in the cool garage for 30 minutes. The dash is no longer sticky at all and you can visibly see the difference between the treated and untreated sections The verdict - This product restores the dried out white faded effect, but does not prevent it from getting sticky in the warm sun.
__________________
~Rob -DD Air Guide, Stillen G3 CAIs, 63mm Throttle Bodies, Motordyne M370, Berk HFCs, FI TDX CBE (non-res, CF), Sprint booster v3, Ecutek Dyno Tuned, and the list goes on... Last edited by Spartan 1771; 04-16-2023 at 04:07 PM. |
04-16-2023, 04:09 PM | #249 (permalink) |
A True Z Fanatic
Join Date: Nov 2009
Location: Western Maryland
Posts: 1,280
Drives: Wife crazy & 09 370Z
Rep Power: 105454 |
So your product completely solved this issue? No fading and no sticky dash, no matter the temperature or level of sunlight?
__________________
~Rob -DD Air Guide, Stillen G3 CAIs, 63mm Throttle Bodies, Motordyne M370, Berk HFCs, FI TDX CBE (non-res, CF), Sprint booster v3, Ecutek Dyno Tuned, and the list goes on... |
04-16-2023, 05:54 PM | #250 (permalink) | |
A True Z Fanatic
Join Date: Oct 2014
Location: socal
Posts: 1,108
Drives: 370z
Rep Power: 13435 |
thanks for posting the results. My guess is that it will likely to become more sticky as it exposes more time under the sun, perhaps days or weeks.
Quote:
|
|
04-16-2023, 05:55 PM | #251 (permalink) |
Track Member
Join Date: May 2021
Location: slovenia
Posts: 558
Drives: 370z pack
Rep Power: 125427 |
So far so good, color good and not sticky. Although, I can't yet tell regarding sunlight, as it was only 1 day where I left it in sunlight for several hours. Other than that, it was either a shorter drive or night.
|
04-16-2023, 07:54 PM | #252 (permalink) |
A True Z Fanatic
Join Date: Nov 2009
Location: Western Maryland
Posts: 1,280
Drives: Wife crazy & 09 370Z
Rep Power: 105454 |
What was the outdoor temperature when you had the car outside?
__________________
~Rob -DD Air Guide, Stillen G3 CAIs, 63mm Throttle Bodies, Motordyne M370, Berk HFCs, FI TDX CBE (non-res, CF), Sprint booster v3, Ecutek Dyno Tuned, and the list goes on... |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Sticky dash pad users | YzGyz | Exterior & Interior | 0 | 02-10-2016 10:44 PM |
Pioneer HU Bezel/Dash kit issue | Magnetic Z | Audio & Video | 16 | 07-25-2015 11:48 PM |
dash issue | jcole8188 | Exterior & Interior | 4 | 09-24-2013 05:11 PM |
dash sticky | mgadrix | Exterior & Interior | 9 | 08-28-2013 12:16 PM |
Dash Issue | Zikben | Nissan 370Z General Discussions | 6 | 12-08-2010 05:12 PM |