Super Unique interior mods!

EP370z

https://goo.gl/images/8Cprp3 I think this is a nice idea.

Cp9

If you have your developer setting enable you can in there that has an option to keep screen while charging that way when it gets power it will come on automatically. That's how I have mine. Also theres also Tasker which I use to cut it off. Cause I go days without driving my miata since i got the z. Theres also a mod that will boot the tablet if it's off,when it gets power. But you have to do that through recovery mode. Mine is a permanent install so that was a must. There was tone of info on xda developer. And on the miata forums. Sadly not many have been done for the z at least i havent seen many

Sent from my SM-G920P using Tapatalk

ChaseZ

I've never used an android tab, but assume developer mode is something you can set it to by default? Or do you need to do something to the OS to make that happen?

I'd be doing a parmanent install too and these android tablets are so cheap that makes it feasible. As long as it works with the DashCommand app, has Bluetooth, and will power on and off with the car that's all I need for me anyways. Not trying to replace my head unit or anything like that, I just want the additional gauges for monitoring.

And if this can be pieced together for a couple hundred bucks or less like it sounds like then il certainly give it a try.

Cp9

You just go to setting and go to about tablet. Then clicked the build number repeatedly and then it will tell you, something like you have enable developer mode. And yeah i know, they've only gotten cheaper since I did mine. The one in the miata is a 1st gen nexus but I just got a 32gb second gen I for like 140. And the one in the miata runs, torque app which I believe is the same as dash command. And it runs it no problem. I'm actaully looking at hooking a megasquirt to the tablet when I go turbo later this year. I've seen it done before. And to do it in the miata was like 220 I belive I got the tablet for 50 and the radio for like 160. Mine is bluetooth to the radio. And the radio is in the glove box. But I've seen some complicated ones that run an amp and run the tablet by its self. Not my cup of tea

Sent from my SM-G920P using Tapatalk

Cp9

But then again to do it in the maita I just had to dremel and cut the dash alittle. To get it to fit behind the bezel. Honestly it was only easy cause it near perfect fit for the second gen miatas.i mean it literally snaps right in no joke

Sent from my SM-G920P using Tapatalk

ChaseZ

Wish it were that easy. Though I don't see this as something really difficult. Basically just need to rig up a way to mount the table on the backside of the navi bezel. Which for that matter could just be epoxying a case on from behind with a few angle brackets.

Had to pull my centre panel off this morning to require my head unit and pull some wires and it looks like the pocket is all one piece part of the finished cover panel, so doesn't look like it's just the navi bezel insert but the whole piece would have to get from the dealer and screw on my existing vent pieces etc. That just means a bit more expensive piece though, not more work.

Tenny

Nexus 7 works really well for this, and is not very difficult to mess with either. I have my nexus 7 (2012 version, cost like $60 to buy and is in great operating condition) completely set up and ready, I've just been lazy about finishing the set up. USB ROM for Nexus 7 is perfect for setting up a Nexus 7, and you can get the 2012 version for free if you search. It doesn't have any more continued updates, but it's free. I believe there is a 2013 version released but costs some money. It has more support for it. Little fuzzy on the details though I did all this set up/research back in August.

Here is a link for some info:
https://mehrvarz.github.io/nexus-7-usbrom/

Here is how I set up my Nexus:

It turns on automatically with car boot if its plugged into power and will immediately shut off into a deep sleep mode when power is stopped. Mine is set up to use torque with an OBD32 plug via bluetooth, but dash command is also viable. The biggest cost would be trying to make it look OEM like which is what I'd like. Wish there was a plug and play option.


Just messing around a while back with positioning and how it felt to use while driving and all.

__________________
2015 Nissan 370z Sports Coupe 6MT Magnetic Black

charnathan

check out my post in the audio&video forum. or even my pic i posted a few pages earlier of my tablet integration.

The only downside with going with a Nexus 7 Gen 1 and Gen 2 is that they are discontinued and hard to find in good shape. I did have a user wanting to use Gen 2 and I have a design for it. Hopefully I can get my stuff up and running soon to sell, but you'd have to at least upgrade to a Nexus 7 Gen 2 if you like my design.

__________________
2014 Nismo #0614 Magnetic Black (stock for now...)

Tenny

Yeah I checked out your thread, and commented on it. I had expressed interest in buying it if it came out for the tablet I had, or at least decently close and I can modify it to my own use. I would have gotten the Gen 2, but I found a near perfect condition Gen 1 and it's already set up the way I want it. So I'll either modify yours or try and just find an alternate way.

__________________
2015 Nissan 370z Sports Coupe 6MT Magnetic Black