370z Blank Button Solution

Jayhovah · 11-14-2016, 03:34 PM

I used add-a-circuits and terminal blocks for constant and ignition 12V that I tie to for all of my interior mods. Tapping an existing circuit is fine for a couple of things, but I think it's much cleaner to add circuits for your additional accessories and the extra work up front makes adding more accessories down the line a lot easier.

So far I've connected:
Antilaser Priority laser jammers
Escort 9500ix radar detector
Homelink mirror
Boost Gauge
Backup camera

Botaine · 04-10-2017, 11:41 PM

I'm getting this little cubby 3d printed. There are a few sites that will do it for you.

370z Blank Button delete by JTM88 - Thingiverse

JustinP · 04-11-2017, 11:05 PM

Quote:

Originally Posted by azian

Hey everyone, I was just searching around for a solution to the blank buttons and what I could replace them with. I found these with usb but they also have a cover so in case of a water drop or something.

USB Dual Audio and Charger port | Japan Auction Parts

USB Dual Charger port | Japan Auction Parts

If I'm understanding correctly, this is as simple as buying the dual charging port, tapping into one of the cigarette lighter power sources...and then having two USB charging options in the center of my 3 buttons? (I have heated seats on far left and far right positions so this would be in the middle)

That seems pretty cool...unless I'm simplifying this too much?

NorthStyle · 04-12-2017, 06:02 AM

Yes, it's that simple.

kenchan · 04-12-2017, 07:50 AM

USB was fairly new technology back 8yrs.. lol noone faking uses mini-usb nomore... my Hero2 in da Z uses mini-USB

Nixin · 04-12-2017, 08:20 AM

I still think the "Ejecto Seato, Bro" decal looks better on that button.

Curtis_J · 04-12-2017, 05:29 PM

I just did this. But I'm thinking if changing it up to smoked glass engraved with a Z logo and possibly backlit red.

JustinP · 04-12-2017, 05:34 PM

Quote:

Originally Posted by Curtis_J

I just did this. But I'm thinking if changing it up to smoked glass engraved with a Z logo and possibly backlit red.

Now that is snazzy...
v2 would have a light up logo.

JustinP · 04-12-2017, 05:35 PM

Quote:

Originally Posted by azian

Hey everyone, I was just searching around for a solution to the blank buttons and what I could replace them with. I found these with usb but they also have a cover so in case of a water drop or something.

USB Dual Audio and Charger port | Japan Auction Parts

USB Dual Charger port | Japan Auction Parts

I just ordered the dual charger port. Such a great idea.

Curtis_J · 04-12-2017, 05:35 PM

That's sort of my plan. I actually bought that piece from a guy who makes them. Has a bunch of different styles and colors. I like the way it looks but now it's got the wheels turning, so I'll probably use it as a template to make some sort of backlit glass unit.

Sent from my SM-G930W8 using Tapatalk

twyrick · 04-17-2017, 10:07 PM

I've been saying for a long time now that 3D printers should start making it possible for car enthusiasts to start designing their own interior replacement trim pieces to mod things. But I haven't seen too much of it happening.

This is great! But it made me think and you know what I'd like even better? I wish there was a variation of this cubby that had more of a slot in the bottom of it so an iPhone could slide into place in it, with the Lightning connector sticking up so it would plug in, docking into it.

One of the annoyances I have with my 370Z right now is lack of any good place to put my iPhone 7 Plus. It's just a little bit too wide to stick it in one of the cup-holders. I can put it in the center compartment itself, but then it's not easily accessible - and I'm liable to forget it when I get out of the car.

Quote:

Originally Posted by Botaine

I'm getting this little cubby 3d printed. There are a few sites that will do it for you.

370z Blank Button delete by JTM88 - Thingiverse

BBQdDude · 07-18-2017, 08:35 AM

I know, resurrect thread from the dead lol.

I see where people have just used the wires to the passenger side adapter. I am looking for one that has a feed even when the car is off.

JustinP · 07-18-2017, 08:38 AM

Quote:

Originally Posted by BBQdDude

I know, resurrect thread from the dead lol.

I see where people have just used the wires to the passenger side adapter. I am looking for one that has a feed even when the car is off.

Just depends on how you wire it.

Sent from my iPhone using Tapatalk Pro

Znelson · 06-21-2019, 09:59 PM

I’ve seen people post pictures of the 3D print of the Button Delete and did not like how bland it looked. So i decided I’d make my own version, I made it where the bottom is attached afterwards so I can wrap it in alcantara fabric. I wanted it to look like something that Nissan should have installed for the Nismo model. I think it came out perfect

04-10-2017, 11:41 PM	#17 (permalink)
Botaine Base Member Join Date: Feb 2011 Location: America Posts: 39 Drives: 370Z Base Automatic Rep Power: 14	I'm getting this little cubby 3d printed. There are a few sites that will do it for you. 370z Blank Button delete by JTM88 - Thingiverse azian likes this.

04-12-2017, 06:02 AM	#19 (permalink)
NorthStyle A True Z Fanatic Join Date: Aug 2015 Location: Deutschland + SC/FL USA Posts: 1,260 Drives: 2011 370Z Nismo Rep Power: 24277	Yes, it's that simple. JustinP likes this.

04-12-2017, 05:35 PM	#25 (permalink)
Curtis_J Base Member Join Date: Jul 2016 Location: St. John's, NL CANADA Posts: 153 Drives: '17 370z Base Rep Power: 23	That's sort of my plan. I actually bought that piece from a guy who makes them. Has a bunch of different styles and colors. I like the way it looks but now it's got the wheels turning, so I'll probably use it as a template to make some sort of backlit glass unit. Sent from my SM-G930W8 using Tapatalk JustinP likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Middle blank button seat warmers	NunButSteez	DIY Section (Do-It-Yourself)	14	05-31-2015 02:43 AM
2013 Nissan 370z cooling solution	latintrpt	Engine & Drivetrain	15	07-11-2013 04:33 PM
[FOR SALE] New Shift Boot and housing, Emergency Button, Block-off Button	DivZero	Parts for sale (Private Classifieds)	7	01-25-2013 10:18 PM
WTB: Blank Button	js1	Wanted	2	05-13-2012 10:42 AM
Solution for aluminum touring pedals for base model 370z.	Geeve	Exterior & Interior	80	10-02-2009 10:35 PM

04-12-2017, 07:50 AM	#20 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	USB was fairly new technology back 8yrs.. lol noone faking uses mini-usb nomore... my Hero2 in da Z uses mini-USB

04-12-2017, 08:20 AM	#21 (permalink)
Nixin A True Z Fanatic Join Date: Sep 2015 Location: GWN Posts: 3,488 Drives: Goodbye Z! Rep Power: 19833	I still think the "Ejecto Seato, Bro" decal looks better on that button.

04-12-2017, 05:29 PM	#22 (permalink)
Curtis_J Base Member Join Date: Jul 2016 Location: St. John's, NL CANADA Posts: 153 Drives: '17 370z Base Rep Power: 23	I just did this. But I'm thinking if changing it up to smoked glass engraved with a Z logo and possibly backlit red.

07-18-2017, 08:35 AM	#27 (permalink)
BBQdDude Base Member Join Date: Aug 2016 Location: Ohio Posts: 122 Drives: 2013 370Z NISMO Rep Power: 9	I know, resurrect thread from the dead lol. I see where people have just used the wires to the passenger side adapter. I am looking for one that has a feed even when the car is off.