|
Uhh so where was I. Take out the here female plugs and this is what you will have. These three pieces can be taken out super easily with a small flathead. Once you look you will now. http://i188.photobucket.com/albums/z...sxtrx2wqv.jpeg
Uh so here's the new relay female harness they I bought. I want to fit in the two box area that's not being used. It doesn't quite fit so it needs to be sanded. The key with sanding this new female relay plug is to utilize the push clip area so it utilizes it like the stock relays harnesses when you took them out earlier. Know what I mean? I don't. Haha http://i188.photobucket.com/albums/z...sbg49plhz.jpeg http://i188.photobucket.com/albums/z...szann0wna.jpeg http://i188.photobucket.com/albums/z...s6qbzjq2n.jpeg http://i188.photobucket.com/albums/z...sfqwtfv9b.jpeg |
Sorry for so many posts but in using my phone and it's a joke.
On beer three. Ok let's see. So this is how a 5 pin relay works on the pink paper. When positive and negative come together. You know what. I'm so tired of doing this. I will update later when I'm actually on's computer. Forget this. Off to the bar!!!!http://i188.photobucket.com/albums/z...sgzvkcv9z.jpeg |
Ok back and sober now.
so when pin 86 and 85 (ground) get energized, pin 30 connects to 87. When its not energized, pin 30 stays connected to pin 87a. Therefore the yellow wire is cut because when 86 pin gets 12v from the headlight or parking light, it will move pin 30 (connected to positive LED) to connect to pin 87 which is nothing and therefore will turn off. There are various threads with various methods to do this but this is just another clean way in my opinion. Here is the wires I tapped into on the harnesses on the relays. Sorry its upside down, just turn your monitor upside down. http://i188.photobucket.com/albums/z...sraqw7voh.jpeg http://i188.photobucket.com/albums/z...sl6luycuq.jpeg Make sure to run a fuse from whatever power source you are tapping into, last thing you want is a fried wire. I used the mini blade fuse holder so it fits in the box. So you should just have one wire coming out of the box which is the blue wire in this case from the relay. This blue wire will run 12v when the car is running and when the headlights or parking lights are turned on, it will stop sending 12v and therefore the LED's will turn off. If you want them on all the time when the car is running, just take out the ground wire (pin 85) from the brown female relay harness and it will no longer energize the coil. Hope that made sense, its a bit hard to explain at time. Once again, there is numerous ways to do this but this is my way with minimal wire running. TIP! Always run a fuse for safety! I will update later when I attach the LED's. Thanks for looking! |
|
Great write up with pictures.
Fyi ur comments in each post are hilarious. $8-10 for milk lmfao |
A slight update. finished my headlights finally. By the way everyone, Oahu is a great island with good weather all year long, come visit and boost our economy please! Thanks in advance!
http://i188.photobucket.com/albums/z...pswgtmnc8b.jpg http://i188.photobucket.com/albums/z...psuvywe8ju.jpg http://i188.photobucket.com/albums/z...psji2pcz3u.jpg |
3 Attachment(s)
It has began Daniel.
|
Quote:
|
The body shop is very impressed with the fit and quality of the kit. They said - "much better then most kits they get". The rear and the skirts were almost perfect (that is all they played with so far).
|
Quote:
|
Quote:
Unles that's some kind of LGB slang. |
Haha thanks cooltoy
|
Hey CoolToy!
Glad to hear its coming together, its about time as I know you had to wait awhile. Im still waiting for my paint guy but its not a big deal as im waiting for some other parts like carbon fender and spoiler (if im lucky) and exhaust so im in no rush. Good for you! Edliaszenik, yeah man I don't know too many Z people down here but then again I don't do much car cruises and and such. Anyhow PM me as id love to see personally hear and see other peoples aftermarket products to see it myself. Shoots! |
Finally some progress.
Fun fact! The volcano on big island is erupting! A site to see right now. Please come visit big island and boost the general HI economy. Our rail system is about $8 billion dollars behind. Oh man oh man. http://i188.photobucket.com/albums/z...seclzsen2.jpeg |
|
|
|
|
Sup brah! Da Nismo emblem stay gay or stay cool?
I thought the Nismo emblem was a nice touch like the Nismo v2 350z I had. I know it's not a Nismo bumper but yay or nay? Can't wait to install and paint the rest of my car. Which means taking everything off again. Fml. |
Nismo is OK.
|
4 Attachment(s)
Mine should be done in a week. Only final wet sanding and assembly left.
|
2 Attachment(s)
For emblems, I am going to do this:
http://www.the370z.com/attachment.ph...1&d=1477351843 or this: http://www.the370z.com/attachment.ph...1&d=1477351843 |
Blah! Nah jk! You must be excited!
I am finally happy to be driving around only to go through it all again in a few weeks. I still need to buff the bumper but it's coming together. http://i188.photobucket.com/albums/z...pso95f0kln.jpg http://i188.photobucket.com/albums/z...pstvjtywdl.jpg |
double post by mistake.
|
Can't afford it? make it!
I'm too broke to buy a real APR splitter or fly1 so imma just make one. I don't drive crazy fast so obviously just for show. Hopefully it comes out well. http://i188.photobucket.com/albums/z...psy26gytzi.jpg |
Nothing to do with shine anymore but pics always help so here's more pics!
http://i188.photobucket.com/albums/z...pscogvvk0i.jpg http://i188.photobucket.com/albums/z...psmzflxvk8.jpg http://i188.photobucket.com/albums/z...psfdgrbgfe.jpg http://i188.photobucket.com/albums/z...pshvowbbdm.jpg http://i188.photobucket.com/albums/z...pse1jsn6qv.jpg |
Waiting on my fly 1 carbon duckbill! Woot woot.
But in the meantime I will finish my home made splitter. I can't afford the real carbon one...sadsies. I used plexiglass and will carbon wrap after. http://i188.photobucket.com/albums/z...pswxra9wlx.jpg http://i188.photobucket.com/albums/z...ps4wimw8xq.jpg http://i188.photobucket.com/albums/z...psmyndzbn4.jpg |
Quote:
|
Nah he other pics of the whole car was just the kit painted. I'm painting the whole car now as It's going into a show so I need everything pristine!
Can't wait!!!! #broke. |
Buffing time. One side almost done. Check out this reflection, like a mirror! Show car paint= zero orange peel. And yes that is Han from fastandfurious lol.
http://i188.photobucket.com/albums/z...ps1log3vta.jpg http://i188.photobucket.com/albums/z...pselqo9tmx.jpg http://i188.photobucket.com/albums/z...pshawh5jsy.jpg |
how's the durability on the plexiglass? and is it heavy?
|
the initial piece before I cut it down was a bit heavy. It first look like the APR splitter but my concern was it was a little heavy despite 1/4" so I cut it down like the FLY1 splitter.
Waiting to get my car back before I put it on so durability I am not sure but being soft, it should serve its purpose when it comes to scraping. I scrape going into work without it so I will find out in the weeks to come how it holds up. |
|
Ugh. Carbon spoiler isn't on yet but it's coming together. #ineedrims
http://i188.photobucket.com/albums/z...ps2b0sv7yb.jpg http://i188.photobucket.com/albums/z...ps4gmzrpnr.jpg http://i188.photobucket.com/albums/z...psgevl4tau.jpg http://i188.photobucket.com/albums/z...ps6kxcpmjo.jpg |
Rims and spoiler needed for sure. Front shot :drool:.
|
That cf wrap you did on the shine auto bumper looks amazing! What kind of wrap did you get? You cleared over the entire bumper after laying it?
|
Are talking to the OP? Shine auto kits come with real cf in those areas.
|
| All times are GMT -5. The time now is 03:46 AM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2