Help Us Develop The Design For New Carbon Fiber Engine Covers

bullitt5897 · 11-11-2009, 02:13 PM

Quote:

Originally Posted by Modshack

Unfortunately, laying this multi-color concept up in a mold would be very complicated..

I agree however couldnt they do a light color spray and clear and get the same effect? I have seen it done before where a light coat of paint was applied to tint the CF to the desired color... i.e. normal CF became blue CF... that was my thought.

Modshack · 11-11-2009, 03:21 PM

Quote:

Originally Posted by bullitt5897

I agree however couldnt they do a light color spray and clear and get the same effect? I have seen it done before where a light coat of paint was applied to tint the CF to the desired color... i.e. normal CF became blue CF... that was my thought.

Most of the colored CF weaves you see are a hybrid Carbon/Kevlar material....The color is in the cloth, not the epoxy pigment or a painted on coloring... You'd have to cut and overlay materials based on my experience in working with this stuff..2x2 twill is hard to work with as it's a very "loose" fabric. It can be done...Would just take a lot of care and time to set up right in the mold..

bullitt5897 · 11-11-2009, 03:32 PM

Ohhh yeah I again agree with you and I know what it takes to make CF parts. If the were to make it multi color CF it would have to be made in stages and would be so much of a PITA that it wouldnt be worth it. What I was talking about was regular CF and then just masking everything off and spraying the silver areas with a light coat of color to get the desired look and then from there removing the masking and finish the clear coating process.

Its a concept... a Neat one but just a concept none the less. Modshack as always your right on target

Mike@Blackline · 11-12-2009, 07:05 PM

Quote:

Originally Posted by Modshack

Unfortunately, laying this multi-color concept up in a mold would be very complicated..

Quote:

Originally Posted by bullitt5897

I agree however couldnt they do a light color spray and clear and get the same effect? I have seen it done before where a light coat of paint was applied to tint the CF to the desired color... i.e. normal CF became blue CF... that was my thought.

Quote:

Originally Posted by Modshack

Most of the colored CF weaves you see are a hybrid Carbon/Kevlar material....The color is in the cloth, not the epoxy pigment or a painted on coloring... You'd have to cut and overlay materials based on my experience in working with this stuff..2x2 twill is hard to work with as it's a very "loose" fabric. It can be done...Would just take a lot of care and time to set up right in the mold..

i was gonna quote your guys entire convo, but i gave up haha. Basically what was stated, the cost to have different colors of weave and then setting these up for production would probably make the product too expensive for the average owner to want to hop on board. Alliance is trying to keep our cost low while ousting the competition in quality.

i love the color schemes you came up with Mike, but to be honest it probably wont happen

That being said, for the emblem area, maybe we can have that area shaved with no holes or indentations for the logo, and then find and sell with the covers nissan or 'Z' badges that mount with adhesive so you can choose what you want to put there, or even leave it blank! hows that idea sound?

bullitt5897 · 11-12-2009, 07:59 PM

Quote:

Originally Posted by battlewagon

i was gonna quote your guys entire convo, but i gave up haha. Basically what was stated, the cost to have different colors of weave and then setting these up for production would probably make the product too expensive for the average owner to want to hop on board. Alliance is trying to keep our cost low while ousting the competition in quality.

i love the color schemes you came up with Mike, but to be honest it probably wont happen

That being said, for the emblem area, maybe we can have that area shaved with no holes or indentations for the logo, and then find and sell with the covers nissan or 'Z' badges that mount with adhesive so you can choose what you want to put there, or even leave it blank! hows that idea sound?

Would it be possible toget it in Red CF or Blue CF or even Yellow or Grey(titanium) CF? I would like to keep the center sections blank so we can add our own logos. Also I think the placement I had for the alliance logo is the best place. but that is my

SOFLY00 · 11-12-2009, 08:37 PM

Quote:

Originally Posted by dcrew1x

The red one is something I would purchase at the right price.

now thats nice!

SpawnAeroJohn · 11-12-2009, 08:53 PM

Quote:

Originally Posted by bullitt5897

I agree however couldnt they do a light color spray and clear and get the same effect? I have seen it done before where a light coat of paint was applied to tint the CF to the desired color... i.e. normal CF became blue CF... that was my thought.

That would be done real easy with silver carbon fiber. (Hexcel texelium)

11-11-2009, 03:32 PM	#18 (permalink)
bullitt5897 Premium Member Join Date: Jan 2009 Location: North GA Posts: 6,831 Drives: Twin Turbo Z34 Rep Power: 3682	Ohhh yeah I again agree with you and I know what it takes to make CF parts. If the were to make it multi color CF it would have to be made in stages and would be so much of a PITA that it wouldnt be worth it. What I was talking about was regular CF and then just masking everything off and spraying the silver areas with a light coat of color to get the desired look and then from there removing the masking and finish the clear coating process. Its a concept... a Neat one but just a concept none the less. Modshack as always your right on target __________________ *Shop Cars: 2013 318whp Nismo VspecII 370z SOLD, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054*

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
EVO-R 370Z Carbon Fiber Mirror covers	EVOR	Exterior & Interior	26	12-04-2012 06:29 AM
Install PWJDM Carbon Kevlar Covers, Battery & Fluid	Equinox	Exterior & Interior	26	11-16-2009 03:13 AM
Full Carbon Fiber Z?	NYBladeZ	Exterior & Interior	3	10-22-2009 06:37 PM
Carbon Fiber B pillars	SpawnAeroJohn	Nissan 370Z General Discussions	26	07-17-2009 09:25 AM
looking for 370z for carbon fiber project and free carbon fiber products	370z_hot	Exterior & Interior	23	05-16-2009 10:32 PM