What are you using for a Phone mount?

Jayhovah · 06-25-2016, 10:49 PM

Here is my rip off of rkellog's mount... Works GREAT except my phone shuts the screen off when it detects a magnetic field (for flip cases and the like).. So eventually I'll have to root it to fix that. As it is, if I wiggle it around a bit, it works fine.

I also tried putting a wireless charger in there. It fit fine, but the phone had to be placed super precisely for it to work and I wasn't happy with it... I might try again in the future.

Thanks for the idea!

I had to do two sets of magnets and metal plates to hold it... I couldn't put them in the middle because I use wireless charging at home and the plate would block it. One big magnet and plate like rkellog did would be much easier.

Gibzki · 06-25-2016, 11:59 PM

I did this too. Best mount imho. Props to rkellog.

Zbrah · 06-26-2016, 02:02 AM

I am using a cd slot phone mount for my IPhone 6. The brand is Koomus but you can find others on Amazon...works really well, I picked up another one for my daily.

kenchan · 06-26-2016, 06:11 AM

On the cheap I recommend the magnet vent mounts. I use it on rentals all the time during biz trips. Comes off clean

SnowXTC · 06-15-2017, 05:59 PM

Thank you, the magnet mount it is awesome. I tried smaller N52 magnets and they did not work, but the N45 1.75 X .25 is awesome. On the screws, they are easy to drop. Once you have taken it off and put it back on once, if you have to take it off again, you will need to find longer screws as the plastic is not made to screwed into repeatedly.

DrNumbers · 07-09-2017, 01:49 AM

Quote:

Originally Posted by SnowXTC

Thank you, the magnet mount it is awesome. I tried smaller N52 magnets and they did not work, but the N45 1.75 X .25 is awesome. On the screws, they are easy to drop. Once you have taken it off and put it back on once, if you have to take it off again, you will need to find longer screws as the plastic is not made to screwed into repeatedly.

I also tried this today, but need to re-do the job. I ended up stacking four N45 1.75 x 0.0625 magnets. While they hold the phone, the phone did swivel a bit on some bumpy roads and on a few hard turns. At one point, the phone turned upside down. As I've learned, stacking four 1/16" thick magnets doesn't provide the same pull force as one 1/4" thick magnet. So I should've just listened to rkellogg. I did take the cubby door off a few times, however, and I didn't have any issues with the screws/plastic.

stannyboy · 08-14-2017, 08:39 PM

I am using this phone mount, it works great and I have moved it from my 240, is300 and now to the Z34. it bolts to the seat and you can bend it a bunch of different ways. it can get shaky due to the length of the arm but its never really bothered me.

Mega Grip Seat Rail or Floor Phone Car Holder Mount with 18" Arm for iPhone 7, 6S, 6 Plus, 7, 6S, 6: Arkon.com

NateB370z · 01-04-2018, 06:10 PM

Thank you rkellogg07!

I am also going to pirate your idea great thinking. I'm going to step it up a notch and do both sides of the lid and possibly add a wireless charger along with it for one of the sides. I have USB from my deck already running into that box so it might just work of heat doesn't become an issue.

Sent from my SM-N950U using Tapatalk

Jayhovah · 01-04-2018, 10:08 PM

Quote:

Originally Posted by NateB370z

Thank you rkellogg07!

I am also going to pirate your idea great thinking. I'm going to step it up a notch and do both sides of the lid and possibly add a wireless charger along with it for one of the sides. I have USB from my deck already running into that box so it might just work of heat doesn't become an issue.

Sent from my SM-N950U using Tapatalk

I experimented with the wireless charger and never had much luck with it... I could get it to work if I had the phone on it juuuuuust so, but the way the lid curves and the positioning of the magnets around the wireless charger just didn't hold the phone in place consistently and the charging was intermittent at best even if I could get the phone to stick in place at all. If you do give it a shot, I'd be interested to see if you an get it to work properly!

NateB370z · 01-04-2018, 10:11 PM

Quote:

Originally Posted by Jayhovah

I experimented with the wireless charger and never had much luck with it... I could get it to work if I had the phone on it juuuuuust so, but the way the lid curves and the positioning of the magnets around the wireless charger just didn't hold the phone in place consistently and the charging was intermittent at best even if I could get the phone to stick in place at all. If you do give it a shot, I'd be interested to see if you an get it to work properly!

Thanks for the info I will definitely take note. I was going to try and take the internals out of a cheap one I had and do a lot of testing before anything final. I had a feeling that the curve would be the real issue as it can't have the magnet plate over the charger so it wouldn't make the best contact with the phone.

Sent from my SM-N950U using Tapatalk

Jayhovah · 01-04-2018, 10:30 PM

Quote:

Originally Posted by NateB370z

Thanks for the info I will definitely take note. I was going to try and take the internals out of a cheap one I had and do a lot of testing before anything final. I had a feeling that the curve would be the real issue as it can't have the magnet plate over the charger so it wouldn't make the best contact with the phone.

Sent from my SM-N950U using Tapatalk

Yup..exactly what I did... it all physically fit in there but I just couldn't get it to work the way I wanted.

NateB370z · 01-04-2018, 10:35 PM

Quote:

Originally Posted by Jayhovah

Yup..exactly what I did... it all physically fit in there but I just couldn't get it to work the way I wanted.

Gotcha. I will give it a go and see what I can come up with. I'll have to see what my note 8 does with the newest charger setup. I have one but don't want to destroy it if I don't have to. Thanks for the heads up.

Sent from my SM-N950U using Tapatalk

SnowXTC · 05-17-2018, 01:48 PM

And I am back to taking it apart again. The N45 magnet is was great with a Samsung S7, I got the Note 8 after I put the car away for winter. Any little bump and it falls right off. So now to find a stronger magnet.

I envision anything metal being sucked to my dash now.....

canmark · 09-01-2018, 05:50 PM

Used old dashcam mount and vent mount
Fits well on side of console

canmark · 09-01-2018, 09:36 PM

One more

06-26-2016, 02:02 AM	#33 (permalink)
Zbrah A True Z Fanatic Join Date: May 2013 Location: The370Z.com Posts: 4,956 Drives: 370Z Rep Power: 5452	I am using a cd slot phone mount for my IPhone 6. The brand is Koomus but you can find others on Amazon...works really well, I picked up another one for my daily. wideglideleon likes this. __________________

06-15-2017, 05:59 PM	#35 (permalink)
SnowXTC Base Member Join Date: Jun 2017 Location: Montana Posts: 17 Drives: 2010 Nissan 370Z Rep Power: 8	Thank you Thank you, the magnet mount it is awesome. I tried smaller N52 magnets and they did not work, but the N45 1.75 X .25 is awesome. On the screws, they are easy to drop. Once you have taken it off and put it back on once, if you have to take it off again, you will need to find longer screws as the plastic is not made to screwed into repeatedly. SteveK likes this.

05-17-2018, 01:48 PM	#43 (permalink)
SnowXTC Base Member Join Date: Jun 2017 Location: Montana Posts: 17 Drives: 2010 Nissan 370Z Rep Power: 8	N45 Great for the S7, Note 8 not so much And I am back to taking it apart again. The N45 magnet is was great with a Samsung S7, I got the Note 8 after I put the car away for winter. Any little bump and it falls right off. So now to find a stronger magnet. I envision anything metal being sucked to my dash now..... Jayhovah and wideglideleon like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
CD cell phone mount	Nick M	Audio & Video	14	08-24-2015 11:21 AM
Cell phone vent mount	Liquid_G	Audio & Video	14	07-31-2014 02:47 PM
Nite Ize Steelie phone car mount	shika805	Exterior & Interior	20	06-30-2014 07:20 PM
Cool Phone Mount - Mountek nGroove	H2O_Doc	Audio & Video	3	10-29-2013 01:49 AM
Garmin Phone Mount	hazzazi	Audio & Video	10	12-25-2011 12:17 AM

06-25-2016, 11:59 PM	#32 (permalink)
Gibzki Base Member Join Date: Sep 2013 Location: ca Posts: 26 Drives: 13 Nissan 370Z PW 7A Rep Power: 12	I did this too. Best mount imho. Props to rkellog.

06-26-2016, 06:11 AM	#34 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	On the cheap I recommend the magnet vent mounts. I use it on rentals all the time during biz trips. Comes off clean

08-14-2017, 08:39 PM	#37 (permalink)
stannyboy Base Member Join Date: Apr 2017 Location: Los Angeles Posts: 3 Drives: 92 Nissan 240sx Rep Power: 8	I am using this phone mount, it works great and I have moved it from my 240, is300 and now to the Z34. it bolts to the seat and you can bend it a bunch of different ways. it can get shaky due to the length of the arm but its never really bothered me. Mega Grip Seat Rail or Floor Phone Car Holder Mount with 18" Arm for iPhone 7, 6S, 6 Plus, 7, 6S, 6: Arkon.com

01-04-2018, 06:10 PM	#38 (permalink)
NateB370z Base Member Join Date: Jul 2017 Location: WA Posts: 6 Drives: 09-370z-VR-6M Rep Power: 8	Thank you rkellogg07! I am also going to pirate your idea great thinking. I'm going to step it up a notch and do both sides of the lid and possibly add a wireless charger along with it for one of the sides. I have USB from my deck already running into that box so it might just work of heat doesn't become an issue. Sent from my SM-N950U using Tapatalk