Hatch release button in cabin?

murf51 · 12-23-2015, 09:36 PM

I would love to see one as well, there are all types of situations where it would make my life easier.

DeliriousClam · 12-23-2015, 10:22 PM

Just gotta wait on the parts then I'll start working on it

DeliriousClam · 12-23-2015, 10:28 PM

And I'll say now if what I'm thinking needs to be done works, it'll be $20 tops for everything

Nixin · 12-24-2015, 08:18 AM

Are you guys kidding me? We are talking about a 370Z not an SUV.

SouthArk370Z · 12-24-2015, 09:53 AM

It's been a while since I looked at the wiring diagrams but, IIRC, all that is required is a switch (momentary contact?) and some wire. Diagrams are in the FSM (see link in my sig).

DeliriousClam · 12-24-2015, 01:18 PM

Quote:

Originally Posted by SouthArk370Z

It's been a while since I looked at the wiring diagrams but, IIRC, all that is required is a switch (momentary contact?) and some wire. Diagrams are in the FSM (see link in my sig).

No for the hatch motor to release, you have to 5-wire it with a relay

SouthArk370Z · 12-24-2015, 01:32 PM

Quote:

Originally Posted by DeliriousClam

No for the hatch motor to release, you have to 5-wire it with a relay

Can you post which page(s) of the FSM have the hatch release wiring diagrams? Unless the hatch button status is sent over the CAN bus, you should be able to add a switch in the cabin and tap into the wire from the button to the BCM.

MacCool · 12-24-2015, 02:25 PM

Quote:

Originally Posted by SouthArk370Z

Can you post which page(s) of the FSM have the hatch release wiring diagrams? Unless the hatch button status is sent over the CAN bus, you should be able to add a switch in the cabin and tap into the wire from the button to the BCM.

I wonder about that, since the opened/closed status of the hatch is part of the vehicle status display. However...

According to Chrisslicks, :

Quote:

According to the service manual the rear trunk release is wired to pin 67 (color GR) of the BCM. To send a "release" signal the pin is shorted to ground.

So for implementation you would wire a momentary switch (like the SRM switch) spliced into pin 67 and the other wire to chassis ground or electrical ground.

SouthArk370Z · 12-24-2015, 03:37 PM

Quote:

Originally Posted by MacCool

I wonder about that, since the opened/closed status of the hatch is part of the vehicle status display. However...

According to Chrisslicks, :
Quote:
According to the service manual the rear trunk release is wired to pin 67 (color GR) of the BCM. To send a "release" signal the pin is shorted to ground.

So for implementation you would wire a momentary switch (like the SRM switch) spliced into pin 67 and the other wire to chassis ground or electrical ground.

I believe Chrisslicks is correct. Except it may be terminal 61. FSM will tell you which switch is which.

The FSM also has diagrams showing how the wires are routed. You may be able to find an easy place to tap into the wire between the hatch button and BCM.

DeliriousClam · 12-24-2015, 07:10 PM

Quote:

Originally Posted by SouthArk370Z

I believe Chrisslicks is correct. Except it may be terminal 61. FSM will tell you which switch is which.

The FSM also has diagrams showing how the wires are routed. You may be able to find an easy place to tap into the wire between the hatch button and BCM.

Oh I know exactly where the wires are in the passenger kick panel. The pin for the hatch release is negative but the motor needs to be 5-wired

DeliriousClam · 12-24-2015, 07:26 PM

SouthArk370Z · 12-24-2015, 09:14 PM

The BCM should handle the motor. All you should have to do is tell the BCM to unlatch the hatch.

If you will tell me the FSM page with the wiring diagram(s), I can verify all this.

DeliriousClam · 12-24-2015, 10:12 PM

Quote:

Originally Posted by SouthArk370Z

The BCM should handle the motor. All you should have to do is tell the BCM to unlatch the hatch.

If you will tell me the FSM page with the wiring diagram(s), I can verify all this.

I go off ALLDATA and direct techs

Jayhovah · 12-25-2015, 01:10 AM

Im in for a DIY.

barncobob · 12-25-2015, 11:37 AM

is it a big deal to use exterior hatch button, I use it 2x a month maybe

12-23-2015, 10:22 PM	#17 (permalink)
DeliriousClam A True Z Fanatic Join Date: May 2015 Location: NJ Age: 31 Posts: 3,758 Drives: 12 Base Sport Rep Power: 54272	Just gotta wait on the parts then I'll start working on it __________________ Stillen, AAM, Shine Auto, Fujimora, Swift, EVO-R, Carbon Fiber Element, Nitrous Outlet MECP Advanced: CEA26671 Most of what I post here are artistic works of fiction and falsehood. Only a fool would take anything I post here as fact.

12-23-2015, 10:28 PM	#18 (permalink)
DeliriousClam A True Z Fanatic Join Date: May 2015 Location: NJ Age: 31 Posts: 3,758 Drives: 12 Base Sport Rep Power: 54272	And I'll say now if what I'm thinking needs to be done works, it'll be $20 tops for everything falicfr and murf51 like this. __________________ Stillen, AAM, Shine Auto, Fujimora, Swift, EVO-R, Carbon Fiber Element, Nitrous Outlet MECP Advanced: CEA26671 Most of what I post here are artistic works of fiction and falsehood. Only a fool would take anything I post here as fact.

12-24-2015, 09:53 AM	#20 (permalink)
SouthArk370Z Premium Member Join Date: Nov 2010 Location: South Arkansas Posts: 8,435 Drives: 2014 Challenger Rep Power: 324198	It's been a while since I looked at the wiring diagrams but, IIRC, all that is required is a switch (momentary contact?) and some wire. Diagrams are in the FSM (see link in my sig). __________________ Steering Lock Links - Search The370Z Bookmarklet - FSM @ NICOclub Mankind has progressed past the need for war but we haven't evolved that far. - NachoMahma

12-24-2015, 07:26 PM	#26 (permalink)
DeliriousClam A True Z Fanatic Join Date: May 2015 Location: NJ Age: 31 Posts: 3,758 Drives: 12 Base Sport Rep Power: 54272	__________________ Stillen, AAM, Shine Auto, Fujimora, Swift, EVO-R, Carbon Fiber Element, Nitrous Outlet MECP Advanced: CEA26671 Most of what I post here are artistic works of fiction and falsehood. Only a fool would take anything I post here as fact.

12-24-2015, 09:14 PM	#27 (permalink)
SouthArk370Z Premium Member Join Date: Nov 2010 Location: South Arkansas Posts: 8,435 Drives: 2014 Challenger Rep Power: 324198	The BCM should handle the motor. All you should have to do is tell the BCM to unlatch the hatch. If you will tell me the FSM page with the wiring diagram(s), I can verify all this. __________________ Steering Lock Links - Search The370Z Bookmarklet - FSM @ NICOclub Mankind has progressed past the need for war but we haven't evolved that far. - NachoMahma

12-23-2015, 09:36 PM	#16 (permalink)
murf51 Base Member Join Date: Aug 2015 Location: Central FL Posts: 32 Drives: 2016 370Z Magma red Rep Power: 10	I would love to see one as well, there are all types of situations where it would make my life easier.

12-24-2015, 08:18 AM	#19 (permalink)
Nixin A True Z Fanatic Join Date: Sep 2015 Location: GWN Posts: 3,488 Drives: Goodbye Z! Rep Power: 19833	Are you guys kidding me? We are talking about a 370Z not an SUV.

12-25-2015, 11:37 AM	#30 (permalink)
barncobob A True Z Fanatic Join Date: Sep 2015 Location: hangtown, CA Posts: 1,164 Drives: 16 370Z auto Rep Power: 590	is it a big deal to use exterior hatch button, I use it 2x a month maybe

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New key for possible hatch release?	hdskull	Nissan 370Z General Discussions	26	10-22-2011 01:33 PM
rear hatch release problem	sonic370	Nissan 370Z General Discussions	12	07-29-2011 12:58 PM
TSB: 2009 nissan 370z coupe; rear hatch will not open on first push of release button	AK370Z	370Z Technical Service Bulletins (TSB) / Recalls	1	02-08-2010 11:32 PM
Hatch Release Question	Jungle Prop	Nissan 370Z General Discussions	3	01-15-2010 08:30 AM
DIY: Stuck Hatch Release Fix (<$3)	spearfish25	DIY Section (Do-It-Yourself)	7	11-07-2009 10:05 PM