Messing around with 3M 1080 CF

Apex2Apex · 08-21-2015, 11:24 AM

I was bored yesterday evening so I started messing around with some 3M CF vinyl.

Haven't had the opportunity to see it in the daylight yet to form a better opinion.

I did this to the door handles awhile ago. Very simple work.

daveb91 · 08-21-2015, 11:27 AM

Is the leg pads the same 3m vinyl? How did you do that?

Apex2Apex · 08-21-2015, 11:31 AM

Quote:

Originally Posted by daveb91

Is the leg pads the same 3m vinyl? How did you do that?

Yes, the leg pads are wrapped with 3M.

I removed the leg pads (very easy) and wrapped them. Once I removed them from the console I removed the holding brackets so I could get the vinyl around it with fewer problems. In the past I used a hair dryer but found using an actual heat gun works 1000X's better (picked one up at Lowes for $22). From removal of both to re-install it took around 30 minutes.

daveb91 · 08-21-2015, 11:35 AM

So you applied it over the existing material? Looks good btw!

Apex2Apex · 08-21-2015, 11:38 AM

Quote:

Originally Posted by daveb91

So you applied it over the existing material?

Correct.

The pad is cushioned, so when applying I pressed it flat and smoothed out the vinyl. By doing that it allowed the cushion to expand back outward without causing a crease or air pockets in the vinyl. The key to the rounding edges is the heat gun.

Edit: Saw your edit, thanks!

kenchan · 08-21-2015, 12:13 PM

cant see the picts..

daveb91 · 08-21-2015, 12:56 PM

Yeah since the edit of your first post the pic links died..

Apex2Apex · 08-21-2015, 01:27 PM

I moved the photos to a new album, which I imagine is the reason you can't see them. I edited the pictures where they sit now, if you still can't see them let me know.

Here's a daylight picture.

cooltoy · 08-21-2015, 01:30 PM

Pics are back.

EVOHUNTER · 08-21-2015, 02:55 PM

that's an atrocious wrap job, This is your finally product?

Not to be an A-hole or anything..

In the end its your car, and you can do what you want.

Just my .2 cents

Apex2Apex · 08-21-2015, 03:13 PM

Quote:

Originally Posted by EVOHUNTER

that's an atrocious wrap job, This is your finally product?

Not to be an A-hole or anything..

In the end its your car, and you can do what you want.

Just my .2 cents

Please feel free to elaborate.

daveb91 · 08-21-2015, 03:56 PM

I hate the silver in the interior... This is a good alternative

Kayzee · 08-21-2015, 04:03 PM

Quote:

Originally Posted by EVOHUNTER

that's an atrocious wrap job, This is your finally product?

Not to be an A-hole or anything..

In the end its your car, and you can do what you want.

Just my .2 cents

Lmao wot? I think this is a sarcastic response just going right over my head

Looks good, i see no imperfections in the wrap job, material, corners/edges.

Apex2Apex · 08-21-2015, 04:17 PM

Quote:

Originally Posted by Kayzee

Lmao wot? I think this is a sarcastic response just going right over my head

Looks good, i see no imperfections in the wrap job, material, corners/edges.

It could be.

I really don't mind tactful criticism, and I know it's not for everyone. I'm still a newbie here and I've seen the back and forth between the real carbon people and the wrap. Let's just say it gets a little heated.

I appreciate the compliment

kenchan · 08-21-2015, 04:19 PM

huh, i did the opposite on the cup holder trim. i like the titanium satin finish so i wrapped the switch bezel and left the ring satin.

next up, HU bezel. good luck with dat one. Ive done it in one piece, but the current one uses one big piece and 3 rings.

08-21-2015, 11:24 AM	#1 (permalink)
Apex2Apex Base Member Join Date: Jul 2015 Location: Central Florida Posts: 130 Drives: 2015 370Z Rep Power: 10	Messing around with 3M 1080 CF I was bored yesterday evening so I started messing around with some 3M CF vinyl. Haven't had the opportunity to see it in the daylight yet to form a better opinion. I did this to the door handles awhile ago. Very simple work. Last edited by Apex2Apex; 08-21-2015 at 01:20 PM.

08-21-2015, 11:35 AM	#4 (permalink)
daveb91 Enthusiast Member Join Date: Jul 2014 Location: Vienna WV Posts: 302 Drives: 370z Rep Power: 25	So you applied it over the existing material? Looks good btw! Last edited by daveb91; 08-21-2015 at 11:35 AM. Reason: Looks good!

08-21-2015, 01:30 PM	#9 (permalink)
cooltoy Elite Member Join Date: Jun 2012 Location: Calgary Posts: 13,971 Drives: 14 PW 370Z S/T MT Rep Power: 243722	Pics are back. __________________ Member of kenchan's "photoshopped mods" and "proper offsets" gang.

08-21-2015, 02:55 PM	#10 (permalink)
EVOHUNTER Track Member Join Date: Jul 2011 Location: Edmonton, Canada Posts: 681 Drives: BOOSTED3-7-0 Rep Power: 15	that's an atrocious wrap job, This is your finally product? Not to be an A-hole or anything.. In the end its your car, and you can do what you want. Just my .2 cents __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
3M 1080 Matte Red Vinyl	steeds	Misc Items for sale (No Z stuff)	1	07-01-2014 09:17 PM
DIY: Wrap b-pillars and mirrors in 3M 1080 carbon textured vinyl	CDepp	DIY Section (Do-It-Yourself)	15	01-02-2014 10:50 AM
Is the Dealer Messing With Me?	tiger123	Brakes & Suspension	26	07-13-2013 04:57 PM
Fun with 3M 1080 CF vinyl	owi1kenobi	Nissan 370Z General Discussions	18	07-02-2012 12:53 AM
Jukebox messing up?	Santent	Audio & Video	3	07-26-2009 07:07 PM

08-21-2015, 11:27 AM	#2 (permalink)
daveb91 Enthusiast Member Join Date: Jul 2014 Location: Vienna WV Posts: 302 Drives: 370z Rep Power: 25	Is the leg pads the same 3m vinyl? How did you do that?

08-21-2015, 12:13 PM	#6 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	cant see the picts..

08-21-2015, 12:56 PM	#7 (permalink)
daveb91 Enthusiast Member Join Date: Jul 2014 Location: Vienna WV Posts: 302 Drives: 370z Rep Power: 25	Yeah since the edit of your first post the pic links died..

08-21-2015, 01:27 PM	#8 (permalink)
Apex2Apex Base Member Join Date: Jul 2015 Location: Central Florida Posts: 130 Drives: 2015 370Z Rep Power: 10	I moved the photos to a new album, which I imagine is the reason you can't see them. I edited the pictures where they sit now, if you still can't see them let me know. Here's a daylight picture.

08-21-2015, 03:56 PM	#12 (permalink)
daveb91 Enthusiast Member Join Date: Jul 2014 Location: Vienna WV Posts: 302 Drives: 370z Rep Power: 25	I hate the silver in the interior... This is a good alternative

08-21-2015, 04:19 PM	#15 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	huh, i did the opposite on the cup holder trim. i like the titanium satin finish so i wrapped the switch bezel and left the ring satin. next up, HU bezel. good luck with dat one. Ive done it in one piece, but the current one uses one big piece and 3 rings.