Open Door / Window Roll-down Issue

BoneZ · 08-06-2015, 08:36 AM

Does anyone else have this problem?

Twice now in the last couple weeks, once on each side, I have opened the door and the window has not inched down like it usually does.

I'm wondering if I have a problem starting or if this is common.

JARblue · 08-06-2015, 08:45 AM

Try window reset procedure. At least that would be my starting point. It's super easy. It's posted in several dozen threads here. Not to mention the owner's manual.

Quote:

Originally Posted by Nissan Owners manual page 2-41

If the windows do not close automatically

If the power window automatic function (closing only) does not operate properly, perform the following procedure to initialize the power window system.

1. Push the ignition switch to the ON position.

2. Close the door.

3. Open the window completely by operating the power window switch.

4. Pull the power window switch and hold it to close the window, and then hold the switch more than 3 seconds after the window is closed completely.

5. Release the power window switch. Operate the window by the automatic function to confirm the initialization is complete.

6. Perform steps 2 through 5 above for other windows.

If the power window automatic function does not operate properly after performing the procedure above, have your vehicle checked by a NISSAN dealer.

BoneZ · 08-06-2015, 08:54 AM

Worth a try for sure.

eastwest2300 · 08-06-2015, 08:59 AM

Quote:

Originally Posted by JARblue

Try window reset procedure. At least that would be my starting point. It's super easy. It's posted in several dozen threads here. Not to mention the owner's manual.

yup this will work, I had to do it too..

BoneZ · 08-06-2015, 09:11 AM

Quote:

Originally Posted by eastwest2300

yup this will work, I had to do it too..

Dood.

I know this is an issue with windows not rolling up. You had the issue of it not automatically cracking open?

onzedge · 08-06-2015, 09:21 AM

Quote:

Originally Posted by JARblue

Try window reset procedure. At least that would be my starting point. It's super easy. It's posted in several dozen threads here. Not to mention the owner's manual.

mishuko · 08-06-2015, 09:24 AM

if you unhooked the battery it could have reset the ECU to not do it... also might affect your fob settings (honk/blinkers flashing etc)

scottIN · 08-06-2015, 12:26 PM

There is a lock out screw in the door jamb. Try adjusting it. My window tint guy used it to keep the windows up when he did my tint.

BoneZ · 08-06-2015, 12:54 PM

Quote:

Originally Posted by scottIN

There is a lock out screw in the door jamb. Try adjusting it. My window tint guy used it to keep the windows up when he did my tint.

Interesting

eastwest2300 · 08-06-2015, 01:30 PM

Quote:

Originally Posted by BoneZ

Dood.

I know this is an issue with windows not rolling up. You had the issue of it not automatically cracking open?

I dont think it matters what issue is going on, that reset feature ought to fix it..

kenchan · 08-06-2015, 02:03 PM

DIY:

Step1: fix windows
Step2: done!

Zbrah · 08-06-2015, 02:28 PM

Quote:

Originally Posted by scottIN

There is a lock out screw in the door jamb. Try adjusting it. My window tint guy used it to keep the windows up when he did my tint.

Repped! I did the reset procedure multiple times but didn't work. Going to look for this lockout screw now.

BoneZ · 08-06-2015, 02:31 PM

Quote:

Originally Posted by Zbrah

Repped! I did the reset procedure multiple times but didn't work. Going to look for this lockout screw now.

Is yours doing what mine does?

Davey · 08-06-2015, 03:08 PM

I don't think I've ever had that happen... I'm interested to see what the solution is though.

BoneZ · 08-06-2015, 03:15 PM

Quote:

Originally Posted by Davey

I don't think I've ever had that happen... I'm interested to see what the solution is though.

I did the reset. So far, so good.

08-06-2015, 08:36 AM	#1 (permalink)
BoneZ A True Z Fanatic Join Date: May 2015 Location: Atlanta, GA Age: 52 Posts: 9,299 Drives: 2012 Blue BallZ Rep Power: 2684382	Open Door / Window Roll-down Issue Does anyone else have this problem? Twice now in the last couple weeks, once on each side, I have opened the door and the window has not inched down like it usually does. I'm wondering if I have a problem starting or if this is common.

08-06-2015, 08:54 AM	#3 (permalink)
BoneZ A True Z Fanatic Join Date: May 2015 Location: Atlanta, GA Age: 52 Posts: 9,299 Drives: 2012 Blue BallZ Rep Power: 2684382	Worth a try for sure. __________________ *“Happiness is having a large, loving, caring, close-knit family in another city.”*-George Burns

08-06-2015, 12:26 PM	#8 (permalink)
scottIN Track Member Join Date: Aug 2011 Location: New Castle, Indiana Posts: 764 Drives: '12 370Z Rep Power: 55	There is a lock out screw in the door jamb. Try adjusting it. My window tint guy used it to keep the windows up when he did my tint. Zbrah and BoneZ like this.

08-06-2015, 02:03 PM	#11 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	DIY: Step1: fix windows Step2: done! madwi and Memphis370Z like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Auto Window Roll Up?	Mitco39	Nissan 370Z General Discussions	6	10-21-2013 02:05 PM
Window Roll up/down with Fob ?	osbornsm	Nissan 370Z General Discussions	14	03-23-2012 05:57 PM
HELP window wont roll up	CGMobile370Z	Exterior & Interior	20	02-09-2012 04:30 PM
Intermittent window roll down	Z_U_later	Nissan 370Z Roadster (Convertible)	0	06-15-2010 03:50 AM
Help window won't roll up	Straight6z	Audio & Video	6	11-22-2009 01:13 AM

08-06-2015, 09:24 AM	#7 (permalink)
mishuko A True Z Fanatic Join Date: Jul 2014 Location: bouncin on tigga Posts: 8,062 Drives: '12 Z Rep Power: 9435	if you unhooked the battery it could have reset the ECU to not do it... also might affect your fob settings (honk/blinkers flashing etc)

08-06-2015, 03:08 PM	#14 (permalink)
Davey A True Z Fanatic Join Date: Apr 2011 Location: Indiana Posts: 3,766 Drives: '15 NISMO 6MT Rep Power: 117171	I don't think I've ever had that happen... I'm interested to see what the solution is though.