2015-16 Nismo Interior Pieces

AntiVenom · 07-28-2015, 10:29 PM

Quote:

Originally Posted by 1LIFE

I used paint on everything except the radio console for which I used Plasti (wanted a texture there). The most important thing is to prep the pieces properly, I always use an ultra fine sand paper then rub down thoroughly with rubbing alcohol. Also once I finish the last coat of paint I apply a very light coat or 2 of clear coat (not enough to make it shiny). As for taking the pieces apart, there is DIYs on here for that and the areas you cant find DIY for you just have to figure it out. The triple gauge cluster is the trickiest and the rear strut brace requires you to remove basically every interior panel from the console back

lol. If you knock it out 1 thing at a time its not bad, and as for wear/chiping no issues if prep and paint are done properly..

I assume you lose the ability to read the words on the steering wheel controls, correct?

1LIFE · 07-28-2015, 10:37 PM

Quote:

Originally Posted by AntiVenom

I assume you lose the ability to read the words on the steering wheel controls, correct?

I think so brother, I don't use any of that stuff anyway

Loges · 07-29-2015, 12:50 AM

Quote:

Originally Posted by phantom370z

Have you seen KAD exterior handles yet? You might change your mind...bad pictures of mine HERE. Now every time I see the stock silver handles they look much worse to me, to each their own maybe.

Looks great! If you look at my mods album right now, which I need to update, you'll see that I have mine 3M vinyl wrapped flat black along with the front splitter and rear diffuser too. I plan to stick with flat black instead of the metallic black that you have just to cover my bases on matching in the future (addition of new pieces at a later time, or fading, peeling, cracking - basically any point where I might have to redo a piece). Only downside to the vinyl method is that you are kinda limited when it comes to the inside part that you would have to prop open if you were to spray them. What side blade is that in the first picture though, the OEM '14 Nismo?

Quote:

Originally Posted by 1LIFE

I used paint on everything except the radio console for which I used Plasti (wanted a texture there). The most important thing is to prep the pieces properly, I always use an ultra fine sand paper then rub down thoroughly with rubbing alcohol. Also once I finish the last coat of paint I apply a very light coat or 2 of clear coat (not enough to make it shiny). As for taking the pieces apart, there is DIYs on here for that and the areas you cant find DIY for you just have to figure it out. The triple gauge cluster is the trickiest and the rear strut brace requires you to remove basically every interior panel from the console back

lol. If you knock it out 1 thing at a time its not bad, and as for wear/chiping no issues if prep and paint are done properly..

Thanks for the details. Unfortunately I don't posses the time for this right now, ~50+ hours a week at work

Looks like I'll just have to get all of the smoked Nismo pieces and put them on my Christmas list

I'll update as I knock them out, one by one.

phantom370z · 07-29-2015, 06:42 AM

Quote:

Originally Posted by Loges

Looks great! If you look at my mods album right now, which I need to update, you'll see that I have mine 3M vinyl wrapped flat black along with the front splitter and rear diffuser too. I plan to stick with flat black instead of the metallic black that you have just to cover my bases on matching in the future (addition of new pieces at a later time, or fading, peeling, cracking - basically any point where I might have to redo a piece). Only downside to the vinyl method is that you are kinda limited when it comes to the inside part that you would have to prop open if you were to spray them. What side blade is that in the first picture though, the OEM '14 Nismo?

Yea, OEM Nismo piece.

Malm · 07-29-2015, 07:32 PM

Smoked looks good. I started going all cf inside and kind of ocd have to finish it. I don't mind the silver too much. Granted my car is silver so I may be biased. Everything already matches lol. Did go full black on the headlights tho. Never liked the chrome or the silver shrouds. Also got rid of the ugly reflector in the headlights. They make cute little pots for small plants

edliaszenik · 07-30-2015, 01:15 AM

So everytime I try to upload a picture of my interior my browser poops itself. -___-

AntiVenom · 08-09-2015, 05:05 PM

anybody happen to have the part number for the steering wheel control cover, or the whole airbag if it has to be purchased that way? thanks!

edliaszenik · 08-10-2015, 12:52 AM

If anyone wants to see how I've done up my interior feel free to pm me. I've done a few pieces in 15 nismo and a few wrapped and painted. I'm not sure if it's cool for me to put up a link to my Instagram here so just pm me and I'll play it safe.

Loges · 04-28-2016, 08:34 AM

PM me a link to your Instagram page, I'd like to see how you did yours.

CanadianSteel · 05-09-2016, 06:05 PM

I also want to do this.

07-29-2015, 07:32 PM	#50 (permalink)
Malm Track Member Join Date: Jan 2014 Location: Palm Bay, Florida Posts: 706 Drives: 11 Nissan 370z bs a7 Rep Power: 12	Smoked looks good. I started going all cf inside and kind of ocd have to finish it. I don't mind the silver too much. Granted my car is silver so I may be biased. Everything already matches lol. Did go full black on the headlights tho. Never liked the chrome or the silver shrouds. Also got rid of the ugly reflector in the headlights. They make cute little pots for small plants __________________ 2011 370 Z Ark - Seibon - Aerojacket - Pioneer - Evo-R - Stance

08-09-2015, 05:05 PM	#52 (permalink)
AntiVenom Track Member Join Date: Nov 2014 Location: North Carolina Posts: 695 Drives: 2011 KAD 6MT Rep Power: 12	anybody happen to have the part number for the steering wheel control cover, or the whole airbag if it has to be purchased that way? thanks! __________________ The GREY GHOST Chronicle instagram: jdmunilla

08-10-2015, 12:52 AM	#53 (permalink)
edliaszenik Base Member Join Date: Sep 2014 Location: Honolulu, HI Posts: 184 Drives: 2012 NISMO 370Z Rep Power: 11	If anyone wants to see how I've done up my interior feel free to pm me. I've done a few pieces in 15 nismo and a few wrapped and painted. I'm not sure if it's cool for me to put up a link to my Instagram here so just pm me and I'll play it safe. Last edited by edliaszenik; 08-10-2015 at 07:17 PM.

04-28-2016, 08:34 AM	#54 (permalink)
Loges Base Member Join Date: Sep 2014 Location: Ohio Posts: 233 Drives: 14 SR 370Z 6MT Rep Power: 93	PM me a link to your Instagram page, I'd like to see how you did yours. __________________ MOTORDYNE // AAM COMPETITION // KW // SPL // STILLEN // FUJIMURA // POWERTRIX // DYNOSTY // ECUTEK // WORK EMOTION CR2P // Z1 MOTORSPORTS // ZSPEED // EIBACH // DEWLA DEZIGN // SETRAB // TOP SECRET // TOMMYKAIRA // AEROWORKZ // SHINE AUTO PROJECT

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Looking for 2015 nismo interior parts	MicntaeG35	Wanted	0	07-12-2015 10:18 PM
2015 nismo blacked out interior	imjello	Exterior & Interior	1	03-28-2015 11:24 PM
[FOR SALE] NISMO Interior pieces	'12NISMO370Z	Parts for sale (Private Classifieds)	3	02-02-2015 09:57 PM
2015 Nismo = Less Interior Room	hey32g	Nismo 370Z	0	11-11-2014 10:00 PM
[WTB] Nismo interior trim pieces	OldFart	Parts for sale (Private Classifieds)	0	03-15-2014 09:26 AM

07-30-2015, 01:15 AM	#51 (permalink)
edliaszenik Base Member Join Date: Sep 2014 Location: Honolulu, HI Posts: 184 Drives: 2012 NISMO 370Z Rep Power: 11	So everytime I try to upload a picture of my interior my browser poops itself. -___-

05-09-2016, 06:05 PM	#55 (permalink)
CanadianSteel Base Member Join Date: Jul 2015 Location: Canada Posts: 91 Drives: 09 370Z Touring, PG Rep Power: 10	I also want to do this.