Hey guys! I just installed my new Evo-R fog light but I'm having a weird issue. Like the instructions says, I did wire the black wire with the black one,
|
|
LinkBack | Thread Tools | Display Modes |
07-15-2015, 11:26 PM | #1 (permalink) |
Base Member
Join Date: May 2013
Location: Val-d'Or
Posts: 75
Drives: 370z sport 2012
Rep Power: 12 |
Evo-R fog light issue (need help plz)
Hey guys!
I just installed my new Evo-R fog light but I'm having a weird issue. Like the instructions says, I did wire the black wire with the black one, the red with the red one and the white wire with the green one. The fog light will stay on all the time, even if the lights are on or off. It seems that its always on 12V like I was pressing the brakes all the time. I connected my wires right after the grommet in the trunk. Any ideas why its doing that? Thanks! |
07-16-2015, 12:32 AM | #2 (permalink) |
Administrator
Join Date: May 2009
Location: Disneyland, Ca
Posts: 8,730
Drives: 🔰
Rep Power: 10 |
Hopefully this can help or if someone else thats installed one recently can chime in.
DIY: EVO-R Foglight Install |
07-16-2015, 01:08 PM | #4 (permalink) |
A True Z Fanatic
Join Date: Jan 2009
Location: Kansas
Posts: 3,800
Drives: 09 Z34-TT 6MT
Rep Power: 42 |
Get a meter or a 12v bulb and connect it to the same pair of wires that goes to your fog light. If the meter always shows 12-14v or the bulb is constantly lit, then it's not the fault of the fog light.
__________________
|
07-16-2015, 08:06 PM | #6 (permalink) |
Enthusiast Member
Join Date: Jan 2012
Location: North Florida
Posts: 316
Drives: '12 MBlue 370z 6sp
Rep Power: 13 |
I installed the Euro factory one which I know is different but as far as wiring I remember a pink/red wire being the brake light. Could be wrong though that was two years ago now.
Like DIGI said you could test with a meter to check for the brake wire. Last edited by AdamRacer; 07-16-2015 at 08:08 PM. |
07-19-2015, 04:18 AM | #7 (permalink) |
A True Z Fanatic
Join Date: Sep 2009
Location: New York
Posts: 1,647
Drives: 09 Nismo 370Z #80
Rep Power: 45 |
All 3 wiring must be connected when test it. If test one by one will not light up correctly.
__________________
WWW.EVO-R.NET |
07-19-2015, 02:39 PM | #8 (permalink) |
Base Member
Join Date: May 2013
Location: Val-d'Or
Posts: 75
Drives: 370z sport 2012
Rep Power: 12 |
Ok so all 3wires connected on the car, black on black, red on red and green on white. The red wire is giving 12v all the time and the white/green wire give 12v when brake is applied.
One thing I notice is that my car is, for some reason, with light off and brake pedal off, is having the fog light fully light up and oem tail light like i was on day running light mode (half the intensity of the brake light) |
07-22-2015, 11:47 AM | #10 (permalink) |
Base Member
Join Date: Jan 2015
Location: Denver
Posts: 2
Drives: 2010 370z
Rep Power: 10 |
Rear fog light
What I did when I installed my light is wired it directly into my left tail light. I only wanted it to light up when I braked, so I had someone press the brake and found the hot wire. The green wire, when hot, makes the light blink and is for hazards, turn signals, actually whatever you want it to do... You don't have to go exactly by the how to sheet that is sent with the light. I didn't even use the green wire.
|
07-22-2015, 12:14 PM | #11 (permalink) | |
Elite Member
Join Date: Jun 2012
Location: Calgary
Posts: 13,966
Drives: 14 PW 370Z S/T MT
Rep Power: 243722 |
Quote:
__________________
Member of kenchan's "photoshopped mods" and "proper offsets" gang.
|
|
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Key Fob Issue/Tire Pressure Light | Bidness91 | Exterior & Interior | 16 | 07-10-2017 01:30 PM |
Key system warning light issue!!! | jenny | Nissan 370Z Warranty / Scheduled Maintenance / Servicing / Repairs | 6 | 01-24-2012 03:10 AM |
map/dome light issue | ZoroItaliano | Exterior & Interior | 6 | 12-15-2011 10:10 AM |
Check engine light issue | Xsad | Intake/Exhaust | 2 | 08-14-2011 02:21 AM |