![]() |
I am no way liable for anyone messing anything up and only doing this as the process i took to change my belts OK so you will need a 14mm
|
![]() |
|
LinkBack | Thread Tools | Display Modes |
![]() |
#1 (permalink) |
Track Member
![]() Join Date: Nov 2013
Location: Anaheim
Posts: 753
Drives: 370 Z Nismo
Rep Power: 37 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]()
I am no way liable for anyone messing anything up and only doing this as the process i took to change my belts
![]() OK so you will need a 14mm socket and a 10mm socket , Phillips screw driver plus a pry tool Total time i would say 1.5 hr to 2 hr depending on skill If you have removed rear speakers you have already done about 3/4 of the work already Here is the start point ![]() Remove all 4 pins on both sides ![]() After you can pop the rear section off ![]() Remove carpet and floor , once you do that you can pop these pieces off ![]() Remove these 10mm bolts located in these holes 1per side of car ![]() Now move to the front and remove these carpet panels , they are a bitch but will pop up ![]() Remove the 4 clips that are toward the front of the car 2 per side ![]() Remove 2 screws with a Phillips screw driver 1 per side ![]() Now take off the panels and the plastic on the strut bar slides out ![]() Remove Door Kick panels they just pry up and side panels where speakers go ![]() Now you can wiggle this part out and remove , it slides backwards and when putting back together this should be the first part installed ![]() These are a little hard to take out and i take no responsibility of damage to the plug or belts I removed them by prying with a flat head , to reinstall them on new belts they are also a bitch and need a little force and wiggle at the same time ![]() Now remove the top 10mm ![]() And bottom 14mm ![]() Get the cover off the top and remove the 14mm also ![]() Last 14mm is at the bottom ![]() Now all you have to do is remove belts and replace with new ones , reverse the process and you are good to go ![]() ![]()
__________________
Instagram @zmanscm Last edited by zmanelite; 07-08-2015 at 04:26 PM. |
![]() |
![]() |
![]() |
#3 (permalink) |
A True Z Fanatic
|
![]()
Will the dye potentially rub off? Stain clothing?
__________________
Top Secret | EVO-R | Fujimura Auto | Shine Auto | Seibon | MRWorks | Swift | SPC | SSR | UpRev | Project Kics | NST | Titek | Eibach | Nismo | Whiteline | Quaife | Invidia | Fly1 | CF Element | Carbon Signal
|
![]() |
![]() |
![]() |
#5 (permalink) |
Base Member
Join Date: Apr 2014
Location: Atlanta
Posts: 34
Drives: 2014 370Z GUN AT
Rep Power: 11 ![]() |
![]()
Is the quality the same as the original belt?
Thanks Darel
__________________
Mods..DRL always on, Stillen CAI, 14'nismo wheels, Bridgestone RE-11's, Rear fog light, EVO-r emblems, GTR start button, painted handles, painted headlights,clear STI lens |
![]() |
![]() |
![]() |
#6 (permalink) |
Track Member
![]() Join Date: Nov 2013
Location: Anaheim
Posts: 753
Drives: 370 Z Nismo
Rep Power: 37 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]()
Yes sir !
The company that did these do other OEM stuff You can find all the info on this thread Evo-r hooked it up Seat belt color change <----------------Here
__________________
Instagram @zmanscm |
![]() |
![]() |
![]() |
#9 (permalink) | |
Track Member
![]() Join Date: Nov 2013
Location: Anaheim
Posts: 753
Drives: 370 Z Nismo
Rep Power: 37 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]() Quote:
This orange is more like a HI Vis or neon orange so it's bright
__________________
Instagram @zmanscm |
|
![]() |
![]() |
![]() |
#12 (permalink) |
Base Member
Join Date: Dec 2015
Location: Denver
Posts: 78
Drives: 370z 40th #704 M6 SC
Rep Power: 10 ![]() |
![]()
Seat belt connector that original poster said was a bitch to remove....this is how service manual says to take them off.
![]()
__________________
Vortech SC|Stillen Sway Bars+Facia+Skirts+CB Exhaust|Z1 Clutch+CSC Elimination Kit|ACT LW Flywheel|Tein Coils+EDFC|SPL Camber Arms|RJM Clutch Pedal|TWM Short Shifter|Morimoto Switchback LED's|Z1 34 Row Oil Cooler|AIR 2 AIR|E85 Flex Fuel|460 whp TheBoostCreep |
![]() |
![]() |
![]() |
#14 (permalink) |
Base Member
Join Date: Dec 2015
Location: Denver
Posts: 78
Drives: 370z 40th #704 M6 SC
Rep Power: 10 ![]() |
![]()
Yeah definitely pry at where the picture shows, on the side of that little box towards the wiring. I was prying at the other side because it was easier to get my tool at it but it was not wanting to go up, as soon as I went to the other side it was like 1 second POP, and it came off with ease.
__________________
Vortech SC|Stillen Sway Bars+Facia+Skirts+CB Exhaust|Z1 Clutch+CSC Elimination Kit|ACT LW Flywheel|Tein Coils+EDFC|SPL Camber Arms|RJM Clutch Pedal|TWM Short Shifter|Morimoto Switchback LED's|Z1 34 Row Oil Cooler|AIR 2 AIR|E85 Flex Fuel|460 whp TheBoostCreep |
![]() |
![]() |
![]() |
#15 (permalink) |
Premium Member
![]() Join Date: Nov 2010
Location: South Arkansas
Posts: 8,435
Drives: 2014 Challenger
Rep Power: 324198 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
![]()
Repped. Thanks for sharing.
__________________
Steering Lock Links - Search The370Z Bookmarklet - FSM @ NICOclub Mankind has progressed past the need for war but we haven't evolved that far. - NachoMahma |
![]() |
![]() |
![]() |
Bookmarks |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
Seat belt swap | JaviZ | Exterior & Interior | 3 | 01-20-2014 11:38 PM |
problem with the seat belt | dudesky | Exterior & Interior | 5 | 01-05-2012 01:25 PM |
seat belt | Axelsc1 | Wanted | 0 | 12-31-2011 09:01 AM |
Seat belt rubbing seat | axeman71 | Exterior & Interior | 6 | 08-23-2011 07:46 PM |
Eliminate Seat Belt | jnaut | DIY Section (Do-It-Yourself) | 9 | 07-07-2010 10:07 AM |