Clear bra on Pearl White

XPEL · 07-17-2015, 08:59 AM

Quote:

Originally Posted by jlo370z

I'm talking about a viper not z, my z is good

Sent from my iPhone using Tapatalk

The 2 pre cut kits that we have available for that both have seams in the film. The seams are there for a reason due to the film. That being said, i've seen some installers one piece the hood I believe once or twice. Where are you located? We can try to locate someone for you.

P0719R.gif
P0719X.gif

jlo370z · 07-21-2015, 04:44 AM

Quote:

Originally Posted by XPEL

The 2 pre cut kits that we have available for that both have seams in the film. The seams are there for a reason due to the film. That being said, i've seen some installers one piece the hood I believe once or twice. Where are you located? We can try to locate someone for you.

Attachment 105656

Attachment 105657

Thanks for the info, if I had stripes the seams would blend into them but I do not. I will probably still go this route just to protect the finish.

Sent from my iPhone using Tapatalk

Zcup · 07-16-2015, 09:16 PM

I put Xpel Ultimate on my car. The car is red. I did the front bumper, 1/3 of the hood and fenders, the A-pillars, 1/3 of the top and the lower front area of the quarter panels. Basically, all the high impact surfaces. Yes, there is a line on hood and roof, but I challenge anyone to find it from six feet away. It's nice to be able to scrub the bug guts off my bumper and front of hood without worrying about jacking up the paint. If you're a paint freak like me, it's essential, and spend the extra money to get the good stuff. If I was doing it over again, I would do the entire hood though.

Fxstbi · 07-17-2015, 10:45 AM

Xpel, check your pm's.

Uxi · 07-17-2015, 11:21 AM

ah, gotta get these chips professionally repaired, I think, then I'll consider the Xpel.

07-16-2015, 09:16 PM	#3 (permalink)
Zcup Base Member Join Date: Dec 2014 Location: Kansas City Posts: 39 Drives: 13 370Z Touring Rep Power: 11	I put Xpel Ultimate on my car. The car is red. I did the front bumper, 1/3 of the hood and fenders, the A-pillars, 1/3 of the top and the lower front area of the quarter panels. Basically, all the high impact surfaces. Yes, there is a line on hood and roof, but I challenge anyone to find it from six feet away. It's nice to be able to scrub the bug guts off my bumper and front of hood without worrying about jacking up the paint. If you're a paint freak like me, it's essential, and spend the extra money to get the good stuff. If I was doing it over again, I would do the entire hood though. bcccpals likes this. __________________ F.I. CBE/Z1 Post MAF Tubes/ K&N Drop-ins

07-17-2015, 10:45 AM	#4 (permalink)
Fxstbi Base Member Join Date: Jun 2015 Location: Illinois Posts: 16 Drives: Corvette Rep Power: 10	Xpel, check your pm's. __________________ Chief washer, clean up and maintenance guy for the wife's pearl white '15 Roadster T/S.

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Pearl White 370	Jetts	New Forum Member	9	12-18-2012 10:53 PM
Pikes Peak White vs Pearl White Difference?	Thefairladyz	Nissan 370Z General Discussions	13	08-15-2012 11:26 PM
#12 Pearl White	toolman18	New Nismo 370Z Owner	4	03-26-2012 11:37 PM
Pearl White Z - Clear Bra?	11Thumper	Nissan 370Z Photos / Spyshots / Video / Media Gallery	5	05-17-2011 05:46 AM
Clear bra on pearl white 370z	antivirus6613	Exterior & Interior	8	03-24-2010 06:43 PM

07-17-2015, 11:21 AM	#5 (permalink)
Uxi Enthusiast Member Join Date: Apr 2015 Location: Southern California Posts: 303 Drives: 16 NISMO Tech PW 6MT Rep Power: 3598	ah, gotta get these chips professionally repaired, I think, then I'll consider the Xpel.