Fujimura Rear Diffuser Installed

kenchan · 06-24-2015, 11:49 AM

i used VHB 5952 on mine.

not coming off any time soon.

gearheadjon · 09-01-2015, 09:47 PM

A couple of shots installed on my Magma Red today

Sent from my iPhone using Tapatalk

Felix 808 · 09-06-2015, 10:55 PM

They all look nice. The question is, are these diffusers actually functional, or are they just for looks? I've never heard about the functionality on our cars.

Thanks

axmea? · 09-07-2015, 12:51 AM

For looks. Even those on Mercs are for looks. On our Z's, these piece looks amazing.

evil370z · 09-07-2015, 01:12 AM

can't wait for my aerojacket df1 carbon diffuser to come in .. also carbon duckbill ahhh, but that does look so nice. i just couldn't wait a month to receive it lol.

Smashley · 09-07-2015, 01:40 AM

Is there one for the 2015 Nismo yet?

lesper4 · 09-08-2015, 03:23 PM

I just got the DF1 and when looking at all these diffusers it looks as through the bottom center light is mounted behind the diffuser? Is that correct.

x10370zx · 10-08-2015, 02:26 AM

Will this fit ok with FI exhaust? Thanks.

Sent from my HTC One_M8 using Tapatalk

lgarcia · 10-13-2015, 09:48 PM

I would say yes, I'm sure you can adjust the gap with additional washers on the hangers if needed.

larZini · 10-14-2015, 12:32 AM

Quote:

Originally Posted by gearheadjon

A couple of shots installed on my Magma Red today

Sent from my iPhone using Tapatalk

Looks nice!

Tree70Z · 10-18-2015, 12:50 AM

Can somebody with the Fujimura diffuser please clarify something for me? Does it get installed by gluing and screwing it on top of the original factory diffuser? If so, does it effectively destroy the original diffuser, assuming that the adhesive is not removable? If that is the case, I think I might experiment with coating my original with Plasti-Dip or vinyl wrap, since both are cheap and can be undone. If I like the look, I'll upgrayyyeeed to the Fujimura.

Zbrah · 10-18-2015, 03:51 AM

Quote:

Originally Posted by Tree70Z

Can somebody with the Fujimura diffuser please clarify something for me? Does it get installed by gluing and screwing it on top of the original factory diffuser? If so, does it effectively destroy the original diffuser, assuming that the adhesive is not removable? If that is the case, I think I might experiment with coating my original with Plasti-Dip or vinyl wrap, since both are cheap and can be undone. If I like the look, I'll upgrayyyeeed to the Fujimura.

No glue! You can use silicone but in this case it's only attached with 3M double sided tape and possibly a couple of screws to secure the fujimura diffuser over your oem bumper. Similar to installing side blades or other aftermarket lips to your car. It's not permanently attached.

Tree70Z · 10-18-2015, 10:36 PM

Quote:

Originally Posted by Zbrah

No glue! You can use silicone but in this case it's only attached with 3M double sided tape and possibly a couple of screws to secure the fujimura diffuser over your oem bumper. Similar to installing side blades or other aftermarket lips to your car. It's not permanently attached.

Thanks for the explanation. In that case, if I don't like it, I can always resell it and probably be out less money than if I had paid for a vinyl wrap.

40 to 332 · 01-10-2016, 05:55 PM

Quote:

Originally Posted by lgarcia

I used the VHB double sided tape, doubled up on top and down the curves to the side, also used the screws that came with the diffuser.

Installed my diffuser yesterday. Used the VHB tape as recommended. After installation using the supplied hardware, I wasn't fully satisfied with the flushness of the fit along the top edge near each end. Decided to raise the car and drop the muffler to allow access to where the diffuser curves to accommodate the exhaust tips. While underneath the car (and with my significant other pushing the diffuser inward along the curved portion as hard as she could), I drilled a 3/16" hole through the apex of the curved portion of the diffuser and through the overlying piece of the plastic bumper (see pic), slipped in a 10-24 1" stainless-steel stove bolt, installed a washer and nut and tightened it down. Repeated the process on the other side. Re-installed the muffler and dropped the car back down. Took about an hour of time. The diffuser is now flush and as tight as a drum. It won't be coming off any time soon! The stove bolt is not visible from the rear (unless you're on your hands and knees LOL). Caution: If you plan to do this, make sure the car is fully supported before getting underneath it.

littlejuanito · 01-13-2016, 01:58 PM

Quote:

Originally Posted by 40 to 332

Installed my diffuser yesterday. Used the VHB tape as recommended. After installation using the supplied hardware, I wasn't fully satisfied with the flushness of the fit along the top edge near each end. Decided to raise the car and drop the muffler to allow access to where the diffuser curves to accommodate the exhaust tips. While underneath the car (and with my significant other pushing the diffuser inward along the curved portion as hard as she could), I drilled a 3/16" hole through the apex of the curved portion of the diffuser and through the overlying piece of the plastic bumper (see pic), slipped in a 10-24 1" stainless-steel stove bolt, installed a washer and nut and tightened it down. Repeated the process on the other side. Re-installed the muffler and dropped the car back down. Took about an hour of time. The diffuser is now flush and as tight as a drum. It won't be coming off any time soon! The stove bolt is not visible from the rear (unless you're on your hands and knees LOL). Caution: If you plan to do this, make sure the car is fully supported before getting underneath it.

Where did you order the Diffuser from? I bought mine off Japanparts almost a month ago an I'm yet to receive any shipping info. Does it usually take this long buying the Fujimura from this site?

09-01-2015, 09:47 PM	#32 (permalink)
gearheadjon Base Member Join Date: Oct 2013 Location: Lexington, KY Posts: 25 Drives: 2013 370z Rep Power: 12	A couple of shots installed on my Magma Red today Sent from my iPhone using Tapatalk ufoz8mycow, axmea?, Silly Rabbit and 2 others like this.

09-06-2015, 10:55 PM	#33 (permalink)
Felix 808 A True Z Fanatic Join Date: Oct 2011 Location: Camarillo, CA Posts: 1,063 Drives: 2011 PW/Grey T/S 7AT Rep Power: 2807	They all look nice. The question is, are these diffusers actually functional, or are they just for looks? I've never heard about the functionality on our cars. Thanks axmea? likes this. __________________ Semper Fi Μολὼν λαβέ

09-07-2015, 12:51 AM	#34 (permalink)
axmea? A True Z Fanatic Join Date: Apr 2012 Location: SoCal Posts: 6,236 Drives: WELL ZED PW 6MT Rep Power: 53241	For looks. Even those on Mercs are for looks. On our Z's, these piece looks amazing. Zingston likes this. __________________ >MyZ's Album< NISMO Convert/ECUTEK/Takeda CAI/F.I. HFC NR CB Carbon/F.I. 34 Row Oil Cooler/4.08 Final Drive /Powertrix+Swifts/Hotchkis/SPL/Whiteline/TWM/Zoom Engineering/EVO-R/AeroJacket Vented CF Fenders + CF Spoiler/Avant Garde-WORK/NST/Morimoto Halo/STi Clear Lenses/Carbon Signal Automotive/RJM Performance/ZSpeed Clutch Flywheel CSC delete

09-07-2015, 01:12 AM	#35 (permalink)
evil370z Enthusiast Member Join Date: Jun 2013 Location: New York Posts: 365 Drives: 14 touring/sport/6MT Rep Power: 12	can't wait for my aerojacket df1 carbon diffuser to come in .. also carbon duckbill ahhh, but that does look so nice. i just couldn't wait a month to receive it lol. __________________ 2014 White Tour/Sports Package 6MT , RJM Adjustable Clutch Pedal, GT-R Start, Stillen CAI, Z1 25 Row Oil Cooler, Motordyne E370, Swifts, 20mm/25mm, SPL Rear Camber TOTALED 10/24/14 2013 Black Tour/Sports Package

09-08-2015, 03:23 PM	#37 (permalink)
lesper4 Base Member Join Date: Nov 2013 Location: S. California, Fontana Posts: 231 Drives: 14 370Z BaseCoupe PW Rep Power: 12	I just got the DF1 and when looking at all these diffusers it looks as through the bottom center light is mounted behind the diffuser? Is that correct. __________________ 2014 Nissan 370Z base coupe PW-m 2004 Mazda RX-8 grant touring VR-m (sold) 1992 Nissan 240SX/SE MG-m (sold)

06-24-2015, 11:49 AM	#31 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	i used VHB 5952 on mine. not coming off any time soon.

09-07-2015, 01:40 AM	#36 (permalink)
Smashley Enthusiast Member Join Date: Aug 2013 Location: Maryland Posts: 347 Drives: mt/sport/tour MB Rep Power: 12	Is there one for the 2015 Nismo yet?

10-08-2015, 02:26 AM	#38 (permalink)
x10370zx Base Member Join Date: Mar 2011 Location: Dallas, Texas Posts: 55 Drives: Nissan 370Z 40th Rep Power: 14	Will this fit ok with FI exhaust? Thanks. Sent from my HTC One_M8 using Tapatalk

10-13-2015, 09:48 PM	#39 (permalink)
lgarcia Base Member Join Date: Feb 2014 Location: Weston, FL Posts: 154 Drives: 2014, 370Z PW Rep Power: 11	I would say yes, I'm sure you can adjust the gap with additional washers on the hangers if needed.

10-18-2015, 12:50 AM	#41 (permalink)
Tree70Z Base Member Join Date: Aug 2015 Location: SoCal Posts: 19 Drives: 2012 Gun Metal Auto Rep Power: 10	Can somebody with the Fujimura diffuser please clarify something for me? Does it get installed by gluing and screwing it on top of the original factory diffuser? If so, does it effectively destroy the original diffuser, assuming that the adhesive is not removable? If that is the case, I think I might experiment with coating my original with Plasti-Dip or vinyl wrap, since both are cheap and can be undone. If I like the look, I'll upgrayyyeeed to the Fujimura.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fujimura cf Rear diffuser installed! (with pics)( AK370Z)	AK370Z	Exterior & Interior	73	04-24-2016 05:47 PM
[WTB] EVO-R or Fujimura rear diffuser.	shurik355	Parts for sale (Private Classifieds)	11	07-29-2014 09:24 PM
[WTB] EVO-R or Fujimura rear diffuser.	shurik355	Parts for sale (Private Classifieds)	8	06-01-2014 12:21 AM
[WTB] Rear Diffuser Evo-R or Fujimura???	neveucd	Parts for sale (Private Classifieds)	0	05-15-2012 05:34 PM
Evo-R and Fujimura rear diffuser	Fastfatdude	Exterior & Interior	5	09-19-2011 04:45 AM