Aftermarket Seats

mag_black · 06-05-2015, 03:43 PM

^^ I'm glad I'm not the only one w/ this issue. I thought it was the seats at first, but it took me hours to figure out a way to get the seats in and lined up properly.

DIGItonium · 06-05-2015, 04:30 PM

I just did a quick price check for our stock seats, and it's already over $1300 for the seat cushion assembly. I don't even want to know what the premium is for NISMO seats. That's like Bride territory. Bride Cuga with suede material...

[EDIT] Apparently there's already a thread on aftermarket seats:
Lets see your aftermarket seats!

DYNAZOR · 06-05-2015, 05:29 PM

Quote:

Originally Posted by DIGItonium

I just did a quick price check for our stock seats, and it's already over $1300 for the seat cushion assembly. I don't even want to know what the premium is for NISMO seats. That's like Bride territory. Bride Cuga with suede material...

[EDIT] Apparently there's already a thread on aftermarket seats:
Lets see your aftermarket seats!

i checked out the cost of the 2015 Nismo seats: almost $7 grand EACH!
Nissan won't sell the whole seat, you have to buy all the parts individually. The aftermarket seats look great and cost about half as much, still too rich for my blood.

If you're only looking to upgrade your stock cloth seats to leather/leather-suede, you can have really nice seats even cheaper yet by going with an aftermarket upholstery vendor like I did. I went with Leatherseats.com, very happy.

nismo13807 · 06-05-2015, 06:55 PM

Quote:

Originally Posted by mag_black

^^ I'm glad I'm not the only one w/ this issue. I thought it was the seats at first, but it took me hours to figure out a way to get the seats in and lined up properly.

haha i had the buddy club rails on my previous car too but my friend help me install it ... he has a lot more patience then i do.. i was cussing after 20 mins in..

but im looking for a new setup for base and rails that will raise the height alil higher or close to stock.. any suggestions? i know plants had a issue with unleveled base.. not sure if that has been solved yet

mag_black · 06-05-2015, 08:10 PM

Quote:

Originally Posted by nismo13807

haha i had the buddy club rails on my previous car too but my friend help me install it ... he has a lot more patience then i do.. i was cussing after 20 mins in..

but im looking for a new setup for base and rails that will raise the height alil higher or close to stock.. any suggestions? i know plants had a issue with unleveled base.. not sure if that has been solved yet

From what I've seen on the net, it seems wedge is the way to go. It sits about 1" higher than stock. I do agree, that the buddy club's are very low, I'm about 6" (5 11 3/4 to be exact.)

nismo13807 · 06-06-2015, 04:28 AM

so im guessing wedges comes with base and slider and can use the recaro side mount plate for my bucket seat?

mag_black · 06-06-2015, 08:49 PM

yes, exactly.

nomodsjk · 06-07-2015, 12:25 PM

I am 6'1" and I have the bride euroster seats with bride rails and I have plenty of room. It's kinda tight with my Helmet on tho

inf3kted · 06-10-2015, 02:33 AM

I'm around 180cm tall and have the bride zeta III (standard size) with bride RO rails i think. It sits lower than stock seat 100%.

In the stock seats i sometimes hit the roof with a helmet on so im assuming in the brides i won't have this issue.

Edit: installation was probably the easiest thing to date I've done. Probably because the rails were suited for z34 and the particular bride seat

06-05-2015, 03:43 PM	#16 (permalink)
mag_black A True Z Fanatic Join Date: Mar 2013 Location: Massachusetts Posts: 1,400 Drives: 09 370Z MT6 Rep Power: 666	^^ I'm glad I'm not the only one w/ this issue. I thought it was the seats at first, but it took me hours to figure out a way to get the seats in and lined up properly. nismo13807 likes this. __________________ fujimura ≠ abbeyRoadCompany ≠ fastIntentions ≠ motordyne ≠ avantGarde ≠ ecutek ≠ nismo ≠ stillen ≠ stoptech ≠ gtm ≠ spl ≠ carbonfiberelement ≠ stance™

06-05-2015, 04:30 PM	#17 (permalink)
DIGItonium A True Z Fanatic Join Date: Jan 2009 Location: Kansas Posts: 3,800 Drives: 09 Z34-TT 6MT Rep Power: 42	I just did a quick price check for our stock seats, and it's already over $1300 for the seat cushion assembly. I don't even want to know what the premium is for NISMO seats. That's like Bride territory. Bride Cuga with suede material... [EDIT] Apparently there's already a thread on aftermarket seats: Lets see your aftermarket seats! __________________ Last edited by DIGItonium; 06-05-2015 at 04:35 PM.

06-06-2015, 08:49 PM	#22 (permalink)
mag_black A True Z Fanatic Join Date: Mar 2013 Location: Massachusetts Posts: 1,400 Drives: 09 370Z MT6 Rep Power: 666	yes, exactly. __________________ fujimura ≠ abbeyRoadCompany ≠ fastIntentions ≠ motordyne ≠ avantGarde ≠ ecutek ≠ nismo ≠ stillen ≠ stoptech ≠ gtm ≠ spl ≠ carbonfiberelement ≠ stance™

06-10-2015, 02:33 AM	#24 (permalink)
inf3kted Base Member Join Date: Aug 2013 Location: australia Posts: 60 Drives: 09 370z Rep Power: 12	I'm around 180cm tall and have the bride zeta III (standard size) with bride RO rails i think. It sits lower than stock seat 100%. In the stock seats i sometimes hit the roof with a helmet on so im assuming in the brides i won't have this issue. Edit: installation was probably the easiest thing to date I've done. Probably because the rails were suited for z34 and the particular bride seat Last edited by inf3kted; 06-10-2015 at 02:35 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Aftermarket seats airbag fix	dimitarm	Exterior & Interior	3	07-15-2013 01:54 PM
Need help with aftermarket seats	gomer_110	Exterior & Interior	13	05-31-2012 11:38 AM
help with aftermarket seats	leighspped	Exterior & Interior	1	06-17-2011 12:15 PM
Aftermarket seats with heaters	TBOX	Exterior & Interior	1	03-27-2011 11:52 AM
aftermarket seats / height	konsol	Nissan 370Z General Discussions	2	02-11-2010 10:37 AM

06-06-2015, 04:28 AM	#21 (permalink)
nismo13807 Enthusiast Member Join Date: Jan 2013 Location: Illinois Posts: 340 Drives: 2013 Nismo 370z Rep Power: 3367	so im guessing wedges comes with base and slider and can use the recaro side mount plate for my bucket seat?

06-07-2015, 12:25 PM	#23 (permalink)
nomodsjk Premium Member Join Date: Apr 2014 Location: martinsburg wv Posts: 2,073 Drives: 2011 370z MB/7at Rep Power: 19962	I am 6'1" and I have the bride euroster seats with bride rails and I have plenty of room. It's kinda tight with my Helmet on tho