Steering wheel question

mliebs

I brought my car back to the dealer and they found the front right tire out of the alignment spec so they corrected it and the wheel is straight now. They pretty much did minor adjustments to everything to bring it more inline with the specs. I asked them to take some of the negative camber out of the rear so they dropped it down to -1.6 from the -2.2 and -1.7 it was at. I thought about bringing it to zero but decided to split the range and stay on the lower end of the scale. Anyway, glad I had it checked.

kenchan

thought friday 4:59pm cars only happens to euro cars..

I guess nissan is more euro than japanese now..

synolimit

What's your toe though? That's a lot of adjustment in camber and on these cars messing with one really messes with the other. You gotta have huge adjustment in both to really get what you need.

__________________
13 370z-

mliebs

Rear toe before:
Left: .23
Right: .06

Rear toe after:
Left: .16
Right: .10

Rear toe angle:
Before: .28
After: .26

RayMaN

Same here.. I'm scared of changing things for this reason.. Feel like it won't come out perfect and I will just get frustrated.

kenchan

just expect that it wont and u wont be surprised when you get the car back.

jchammond

that's about as positive as you can get with stock components (-1.6,7)

__________________
MazWorx built long block | FI-TT-100 Stage 2.75 | IPT built 7A/T

http://www.the370z.com/members-370z-...s-musings.html

jchammond

yep;i've been doing my own....when you go max positive camber-it also gives you more +toe,,,but you gotta have some +toe in the rear or the azzend of the car will be dancing all over the place;especially hard acceleration & high speeds.(dangerous to have no toe in rear)
i think it's like 0.09*-0.21* (total 0.18*-0.24*)

__________________
MazWorx built long block | FI-TT-100 Stage 2.75 | IPT built 7A/T

http://www.the370z.com/members-370z-...s-musings.html