Show Us Your Roll Bar

AntiVenom · 08-07-2015, 01:12 PM

I am reading this thread with great interest.

I am not knocking the RPM cage. Looks like better than average for bolt-in. I think there are two things that make me wanna go custom.

1) what synolimit mentions about the rear mounting points. I am not saying they won´t hold (I am not an engineer), but I don´t think they are in the strongest spot.

2) i don´t think it utilizes the interior space as well as it could. This is prob ok for shorter guys, or folks that like to sit really close to the steering wheel, but I think it could be moved out.

Then again, I could be completely out of my mind since I have never built a cage. hahaha.

It´s probably about a year out for me, but I will post back to this thread when it´s done.

KevinN · 08-12-2015, 05:08 PM

definitely interested in a group buy, any updates with RPM?

RPMROLLBAR · 08-13-2015, 03:25 PM

Hi Everyone,

We are interested in doing a group buy for everyone on here. We have a new vendor that is a sponsor here and we will work through him to make sure you all get what you're looking for. We will do some very special pricing along with some freebies for anyone that gets in on the group buy.

I do want to address some of the concerns that were brought up on this thread. First and foremost I have 25 years experience building professional drag racing cars that run in the five second zone. RPM is a division of our hardcore race car division. I follow NHRA specifications on all designs which are usually more stringent then SCCA/NASA rules. The attachment points need to use a 6x6 plate as per rules, the rear shock towers as strong as they may be won't facilitate the use of a sandwich plate which is a requirement, the wheel well method has been tested numerous times over the years. As for the main hoop attachment it MUST be attached at a point that is lower then the driver's seat otherwise the main hoop will not protect the driver in a roll over. Although the upper shelf is a strong point it doesn't adhere to the sanctioning body rules. Most entry level classes would be ok w/the shelf, the NHRA or SCCA sanctioning bodies would likely take exception to the shelf.

If you have questions feel free to ask or give us a call at 503-486-7011

Also we TIG weld all of our rollbars including mild steel. We build our bars in either a .120 dom mild steel or 4130 chromoly in .083 or .095 wall depending on whether you road course or drag race. We look forward to hearing from you.

Regards,
Rob

MAMotorsports · 08-13-2015, 04:19 PM

You ask, and you shal receive!

You asked, and we delivered! RPM Roll bar Group Buy!

Hotrodz · 08-13-2015, 07:32 PM

It looks like reviving this thread proved to be a good thing for some folks. Please post up some pictures and reviews once you get your roll bars.

Morfiy · 08-31-2015, 08:27 AM

Here is my HPI Rollbar with 6 mounting points in Piano Black color

AntiVenom · 08-31-2015, 10:19 AM

Quote:

Originally Posted by Morfiy

( Click to show/hide )

Any details on how this mounts? Specifically as they relate to backer plates, modifications to interior, etc.

TerribleONE · 08-31-2015, 10:36 AM

Nice setup ^^

Morfiy · 08-31-2015, 02:44 PM

Quote:

Originally Posted by AntiVenom

Any details on how this mounts? Specifically as they relate to backer plates, modifications to interior, etc.

It secures to the floor (behind the seats) rear chasis and seat belt upper mount.
I did report in my blog with supporting pictures, but it is written in russian

As of interior, I've cutted three plastic details on each side, and there's no way to avoid that. It was so painfull to do so, but result is worth it!
here is link... Rollbar

This is my first Japanese part ever which came without installation instruction and even single sticker ! Crisis ??)

AntiVenom · 08-31-2015, 02:46 PM

Quote:

Originally Posted by Morfiy

It secures to the floor (behind the seats) rear chasis and seat belt upper mount.
I did report in my blog with supporting pictures, but is written in russian

Rollbar

Thanks! I will try my luck with google translator.

AntiVenom · 08-31-2015, 03:11 PM

Anyone wanna weigh in on whether or not this would pass tech for hpde/pdx?

Morfiy · 08-31-2015, 03:16 PM

Quote:

Originally Posted by AntiVenom

Thanks! I will try my luck with google translator.

No prob at least you get an idea

Wonka2581 · 08-31-2015, 03:48 PM

Whats the ballpark price on getting a roll bar start to finish ?

carlitos_370z · 08-31-2015, 03:51 PM

Quote:

Originally Posted by Morfiy

Here is my HPI Rollbar with 6 mounting points in Piano Black color

Morfiy · 08-31-2015, 03:51 PM

Quote:

Originally Posted by Wonka2581

Whats the ballpark price on getting a roll bar start to finish ?

around 2k

08-07-2015, 01:12 PM	#46 (permalink)
AntiVenom Track Member Join Date: Nov 2014 Location: North Carolina Posts: 695 Drives: 2011 KAD 6MT Rep Power: 12	I am reading this thread with great interest. I am not knocking the RPM cage. Looks like better than average for bolt-in. I think there are two things that make me wanna go custom. 1) what synolimit mentions about the rear mounting points. I am not saying they won´t hold (I am not an engineer), but I don´t think they are in the strongest spot. 2) i don´t think it utilizes the interior space as well as it could. This is prob ok for shorter guys, or folks that like to sit really close to the steering wheel, but I think it could be moved out. Then again, I could be completely out of my mind since I have never built a cage. hahaha. It´s probably about a year out for me, but I will post back to this thread when it´s done. __________________ The GREY GHOST Chronicle instagram: jdmunilla

08-13-2015, 03:25 PM	#48 (permalink)
RPMROLLBAR Base Member Join Date: Aug 2015 Location: Oregon Posts: 1 Drives: Nissan Rep Power: 10	Hi Everyone, We are interested in doing a group buy for everyone on here. We have a new vendor that is a sponsor here and we will work through him to make sure you all get what you're looking for. We will do some very special pricing along with some freebies for anyone that gets in on the group buy. I do want to address some of the concerns that were brought up on this thread. First and foremost I have 25 years experience building professional drag racing cars that run in the five second zone. RPM is a division of our hardcore race car division. I follow NHRA specifications on all designs which are usually more stringent then SCCA/NASA rules. The attachment points need to use a 6x6 plate as per rules, the rear shock towers as strong as they may be won't facilitate the use of a sandwich plate which is a requirement, the wheel well method has been tested numerous times over the years. As for the main hoop attachment it MUST be attached at a point that is lower then the driver's seat otherwise the main hoop will not protect the driver in a roll over. Although the upper shelf is a strong point it doesn't adhere to the sanctioning body rules. Most entry level classes would be ok w/the shelf, the NHRA or SCCA sanctioning bodies would likely take exception to the shelf. If you have questions feel free to ask or give us a call at 503-486-7011 Also we TIG weld all of our rollbars including mild steel. We build our bars in either a .120 dom mild steel or 4130 chromoly in .083 or .095 wall depending on whether you road course or drag race. We look forward to hearing from you. Regards, Rob Rusty, Hotrodz, 1LIFE and 2 others like this.

08-13-2015, 04:19 PM	#49 (permalink)
MAMotorsports Track Member Join Date: Jul 2015 Location: Glen Arm, MD Posts: 872 Drives: 370Z Rep Power: 17	You ask, and you shal receive! You asked, and we delivered! RPM Roll bar Group Buy! Rusty, Hotrodz and carlitos_370z like this. __________________ Daelen @ MA Motorsports MA-Motorsports.com https://www.facebook.com/pages/MA-Mo...C/125379858828 Last edited by MAMotorsports; 08-13-2015 at 04:22 PM.

08-13-2015, 07:32 PM	#50 (permalink)
Hotrodz A True Z Fanatic Join Date: Aug 2012 Location: NW, AZ Posts: 9,330 Drives: 10 Nissan 370z Nismo Rep Power: 2684385	It looks like reviving this thread proved to be a good thing for some folks. Please post up some pictures and reviews once you get your roll bars. carlitos_370z likes this. __________________ *Fast Intentions TT Installed and Tuned by Seb at SpecialtyZ 610whp 560tq:\|Fast Intentions 3" TT-TDX*\|SpecialtyZ/Fast Intentions 72 Row Oil Cooler\|SZ 6 Puck Clutch & Flywheel\|3GsCustoms\|Z1\|Wavetrac\|Hotchkis\|Whiteline \|Blitz\|Fortune Auto 500\|Fujimura\|SPL\|H&R\|TK\|TWM\|RPM Rollbar\|Sparco\|Next Level Performance\|TrackSpec\|AeroFlow Dynamics\|Pioneer\|

08-31-2015, 08:27 AM	#51 (permalink)
Morfiy Base Member Join Date: Dec 2012 Location: Russia Posts: 209 Drives: 370Z "Authentic" Rep Power: 12	Here is my HPI Rollbar with 6 mounting points in Piano Black color TerribleONE, pfregeolle, GaleForce and 4 others like this.

08-12-2015, 05:08 PM	#47 (permalink)
KevinN Base Member Join Date: Aug 2009 Location: California Posts: 98 Drives: z Rep Power: 16	definitely interested in a group buy, any updates with RPM?

08-31-2015, 10:36 AM	#53 (permalink)
TerribleONE A True Z Fanatic Join Date: Jan 2009 Location: Socal Posts: 10,203 Drives: WOT Rep Power: 5850	Nice setup ^^ __________________ 638WHP 541WTQ @ 13.5PSI Build thread

08-31-2015, 03:11 PM	#56 (permalink)
AntiVenom Track Member Join Date: Nov 2014 Location: North Carolina Posts: 695 Drives: 2011 KAD 6MT Rep Power: 12	Anyone wanna weigh in on whether or not this would pass tech for hpde/pdx? __________________ The GREY GHOST Chronicle instagram: jdmunilla

08-31-2015, 03:48 PM	#58 (permalink)
Wonka2581 A True Z Fanatic Join Date: Nov 2012 Location: Chattanooga, TN Posts: 3,083 Drives: MY WIFE CRAZY.... Rep Power: 2611	Whats the ballpark price on getting a roll bar start to finish ? __________________ "I have nothing to offer but blood, toil, tears and sweat""Winston Churchill"

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
East vs West show down!! 1/4 mile, car show, dyno. Who's going??	Gregor12	South East Region	1	11-04-2014 03:27 PM
MYSTIC Auto Show & Waterloo Air Show	flaelin	Canada	3	06-17-2014 11:07 PM
AZ: Show N Shine! Wretched Intentions/Charity Car Show! St. Mary's Food Bank Alliance	Jake_Epley	Western Region	0	11-03-2013 09:28 AM
So-Cal Summer Daze Car Show Jul/17th/10 Free car show	ElitePromo	Southern California Region	11	07-09-2010 04:51 AM
Booth Babes of 2009 Essen Motor Show, Los Angeles Auto Show, Tokyo Motor Show etc :D	AK370Z	Gentleman's Club	29	12-07-2009 09:33 PM