How i remove the triple gauges in dash ?
 

Hi , guys this is my first time writing

I just want to know how to open or remove the tripple guages plz help

The ones up top? Oil temp, clock, battery voltage ones?

Have fun. You have to take out basically the entire dash. Most people just rip them out from the top, destroying them. Mr. Gale is one of the few I know of who removed them intact; I believe they are now displayed in a trophy case in his home :icon17:

Ooh destroy it , i want just change the clock to put air fuel ratio gauge

The triple gauges are actually one piece in behind the dash. You cannot replace just one gauge.

Also to remove the gauges without damaging them, the dash needs to be removed.

https://farm9.staticflickr.com/8503/...7412bd03_c.jpgDash by J M Gale, on Flickr

Yikes. I'd keep the clock!

Heres an idea incase you dont want to go through the trouble

http://www.the370z.com/exterior-inte...-pictures.html

You can PM Galeforce and he will offer you a price with shipping on the pillar

:iagree:

Mr. Gale makes a fantastic product :tup:

Gale is correct, they are all linked together so if one goes they all go.
The proper way to get them out is taking off the dash, there is a DIY on how to get them out without removing the dash but this requires some cutting up & snapping a few pieces that most do not want to break.

Thanks gale


Iam Ali Alshraifi

I bought from u dual gauge pillar


But i still need another place to put gauge



Thanks by the way

Hi Ali! :hello:

Do you have the factory navigation screen or the cubby? If you have the cubby you could install your gauge there.

Hi bro


I have the factory navigation

I try too much to open gauge with out cutting or hit some thing but can't

If you have the factory nav then you can plug into it via the video input & run a carPC or other data system and view it through the Nav screen. Will look similar to this but not exactly as I did not have nav but used the Nav dash piece to create it:
https://lh3.googleusercontent.com/-1...800/Teaser.JPG

I love how that turned out.

My work in progress
https://www.facebook.com/photo.php?f...&theater&ifg=1

http://www.the370z.com/members/giral...d-oem-gone.jpg

http://www.the370z.com/members/giral...imary-afix.jpg

http://www.the370z.com/members/giral...-installed.jpg