Bolt In Cage

tibal · 02-25-2015, 02:45 PM

Definitely Interested in a 4pt Version. Sickness!!

chops · 02-25-2015, 03:13 PM

remember folks, unless you're wearing a helmet whenever you're driving your car, you dont want to go and run a roll cage. running one on the streets as a daily driver can kill you in an accident even if the entire cage is properly cushioned with foam..etc. you need a full 5 point harness, and proper seats before you go buying a roll cage!

bullitt5897 · 02-25-2015, 03:20 PM

Quote:

Originally Posted by PheeNoIVI

Is this type of cage street legal?

Yes it is street legal.

nissan_fan · 02-25-2015, 03:50 PM

In for final price on these beauties

tturbo370z · 02-25-2015, 03:55 PM

I have the exact same seats, harnesses and amuse bar as wiggins

I would be interested in one as thats the only reason I have the amsur support bar was to screw u harnesses into it and look bad ***. Being able to keep that piece of shinny and make the car street/track drivable I like. Most likely be interested in a 4 point having not seen a 6 yet. I do recall this process some tie back about producing these and I'm glad it's not gonna die

Wiggins3377 · 02-25-2015, 08:37 PM

I had a conversation with Mike at Endurance Motorsports today to discuss some logistics and I know Billet did as well so he can chime in from his discussion. Here's a brief summary. Mike expressed some concern related to those of you looking to install this cage and use it in any sort of "class" racing event, reason being is there are apparently (I can neither confirm or object to this) specific rule sets for cage building when racing in certain classes. When I went to Endurance last spring, the cage was built for show and street use. The cage is built with high quality materials and is more than rigid enough for my purposes, however Mike expressed that if someone wanted to use this cage for class racing he would much rather have the car and build a cage specific to that car.

So that being said, who's looking for a cage for street and show use? Yes, the cage is rigid enough to use with a harness so this option can replace other options of the same variety on the market for just a fraction more in cost.

I would also assume the cost of a raw, un-powdercoated cage will be about $900 plus shipping.

I'm planning on taking my car to Endurance towards the end of March for some other work so, depending on interest these could be ready as soon as late April.

Im not asking for any sort of payment. Right now I just want to gauge interest at a more serious level so here starts a list. Lets see how many we have on board.

1) wiggins3377
2)
3)
4)
5)
6)
7)
8)
9)
10)

tturbo370z · 02-25-2015, 10:06 PM

Quote:

Originally Posted by Wiggins3377

I had a conversation with Mike at Endurance Motorsports today to discuss some logistics and I know Billet did as well so he can chime in from his discussion. Here's a brief summary. Mike expressed some concern related to those of you looking to install this cage and use it in any sort of "class" racing event, reason being is there are apparently (I can neither confirm or object to this) specific rule sets for cage building when racing in certain classes. When I went to Endurance last spring, the cage was built for show and street use. The cage is built with high quality materials and is more than rigid enough for my purposes, however Mike expressed that if someone wanted to use this cage for class racing he would much rather have the car and build a cage specific to that car.

So that being said, who's looking for a cage for street and show use? Yes, the cage is rigid enough to use with a harness so this option can replace other options of the same variety on the market for just a fraction more in cost.

I would also assume the cost of a raw, un-powdercoated cage will be about $900 plus shipping.

I'm planning on taking my car to Endurance towards the end of March for some other work so, depending on interest these could be ready as soon as late April.

Im not asking for any sort of payment. Right now I just want to gauge interest at a more serious level so here starts a list. Lets see how many we have on board.

1) wiggins3377
2) tturbo370z
3)
4)
5)
6)
7)
8)
9)
10)

Count me as interested. Curious to what makes it class legal depending on scca Or strip

bullitt5897 · 02-25-2015, 10:25 PM

We were looking at NASA standards... I have a question out to nasa in respects to the bolt in aspect of the cage. Nasa is more strict than scca.

tturbo370z · 02-25-2015, 10:34 PM

Quote:

Originally Posted by bullitt5897

We were looking at NASA standards... I have a question out to nasa in respects to the bolt in aspect of the cage. Nasa is more strict than scca.

Being I only use my as street at the moment lol when it's put together, I would prefer the nasa rules then. I believe that's what most guys in my area are doing. Thanks mike! Keep me posted brotha

Rusty · 02-25-2015, 11:43 PM

Originally Posted by Wiggins3377 View Post
I had a conversation with Mike at Endurance Motorsports today to discuss some logistics and I know Billet did as well so he can chime in from his discussion. Here's a brief summary. Mike expressed some concern related to those of you looking to install this cage and use it in any sort of "class" racing event, reason being is there are apparently (I can neither confirm or object to this) specific rule sets for cage building when racing in certain classes. When I went to Endurance last spring, the cage was built for show and street use. The cage is built with high quality materials and is more than rigid enough for my purposes, however Mike expressed that if someone wanted to use this cage for class racing he would much rather have the car and build a cage specific to that car.

So that being said, who's looking for a cage for street and show use? Yes, the cage is rigid enough to use with a harness so this option can replace other options of the same variety on the market for just a fraction more in cost.

I would also assume the cost of a raw, un-powdercoated cage will be about $900 plus shipping.

I'm planning on taking my car to Endurance towards the end of March for some other work so, depending on interest these could be ready as soon as late April.

Im not asking for any sort of payment. Right now I just want to gauge interest at a more serious level so here starts a list. Lets see how many we have on board.

1) wiggins3377
2) tturbo370z
3) Rusty
4)
5)
6)
7)
8)
9)
10)

I do trackdays. The track I go to doesn't have any rules for a cage. But in the future. I'm planning on going to other tracks. And I don't know if they have any rules for cages. So I would like to be safe and not sorry if it was built to someone's spec's.

PheeNoIVI · 02-26-2015, 12:22 AM

Add me to the list of interested buyers!

Wiggins3377 · 02-26-2015, 08:28 AM

Added PheeNoIVI to the list.

1) wiggins3377
2) tturbo370z
3) Rusty
4) PheeNoIVI
5)
6)
7)
8)
9)
10)

AntiVenom · 02-26-2015, 11:33 AM

highly interested but only if it would be NASA or at minimum SCCA legal. So I guess that means don't add me to the list.

bullitt5897 · 02-26-2015, 11:39 AM

There is a street version too... If you don't want the race spec version

bullitt5897 · 02-26-2015, 11:40 AM

1) wiggins3377
2) tturbo370z
3) Rusty
4) PheeNoIVI
5) bullitt5897 (white dragon)
6) bullitt5897 (VSPEC II)
7)
8)
9)
10)

02-25-2015, 02:45 PM	#31 (permalink)
tibal Track Member Join Date: Dec 2008 Location: Safest Town In America Posts: 987 Drives: TT-370Z and 2.5RS Rep Power: 17	Definitely Interested in a 4pt Version. Sickness!! __________________ 2010 - PG - M6 - 370zTT 453/409 6lbs IG @TRbal10 TEAM FLY1 MOTORSPORTS

02-25-2015, 03:55 PM	#35 (permalink)
tturbo370z Track Member Join Date: May 2012 Location: Az Posts: 622 Drives: 09 370z sport 6mt Rep Power: 128	I have the exact same seats, harnesses and amuse bar as wiggins I would be interested in one as thats the only reason I have the amsur support bar was to screw u harnesses into it and look bad ***. Being able to keep that piece of shinny and make the car street/track drivable I like. Most likely be interested in a 4 point having not seen a 6 yet. I do recall this process some tie back about producing these and I'm glad it's not gonna die Wiggins3377 likes this. __________________ JUST STUFF 800whp700wtq Tturbo370z 800whp build https://instagram.com/jdm_370z

02-25-2015, 08:37 PM	#36 (permalink)
Wiggins3377 A True Z Fanatic Join Date: Jul 2011 Location: Cincinnati Posts: 3,236 Drives: 40th 370 Rep Power: 77	I had a conversation with Mike at Endurance Motorsports today to discuss some logistics and I know Billet did as well so he can chime in from his discussion. Here's a brief summary. Mike expressed some concern related to those of you looking to install this cage and use it in any sort of "class" racing event, reason being is there are apparently (I can neither confirm or object to this) specific rule sets for cage building when racing in certain classes. When I went to Endurance last spring, the cage was built for show and street use. The cage is built with high quality materials and is more than rigid enough for my purposes, however Mike expressed that if someone wanted to use this cage for class racing he would much rather have the car and build a cage specific to that car. So that being said, who's looking for a cage for street and show use? Yes, the cage is rigid enough to use with a harness so this option can replace other options of the same variety on the market for just a fraction more in cost. I would also assume the cost of a raw, un-powdercoated cage will be about $900 plus shipping. I'm planning on taking my car to Endurance towards the end of March for some other work so, depending on interest these could be ready as soon as late April. Im not asking for any sort of payment. Right now I just want to gauge interest at a more serious level so here starts a list. Lets see how many we have on board. 1) wiggins3377 2) 3) 4) 5) 6) 7) 8) 9) 10) bullitt5897 and Nut_N_Much like this. __________________ AccuAir/ AirRex/ Amuse/ Bride Japan/ Carbon Fiber Element/ Carbon Signal/ Evo-R/ NRG/ Project Kics/ Samco/ Shine Auto/ SPC/ SPL/ Stance/ Stillen/ Takata/ Top Secret/ Work

02-25-2015, 10:25 PM	#38 (permalink)
bullitt5897 Premium Member Join Date: Jan 2009 Location: North GA Posts: 6,831 Drives: Twin Turbo Z34 Rep Power: 3682	We were looking at NASA standards... I have a question out to nasa in respects to the bolt in aspect of the cage. Nasa is more strict than scca. Wiggins3377 and tturbo370z like this. __________________ *Shop Cars: 2013 318whp Nismo VspecII 370z SOLD, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054*

02-25-2015, 11:43 PM	#40 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,191 Drives: 2011 Nismo GM 6M Rep Power: 2684437	Originally Posted by Wiggins3377 View Post I had a conversation with Mike at Endurance Motorsports today to discuss some logistics and I know Billet did as well so he can chime in from his discussion. Here's a brief summary. Mike expressed some concern related to those of you looking to install this cage and use it in any sort of "class" racing event, reason being is there are apparently (I can neither confirm or object to this) specific rule sets for cage building when racing in certain classes. When I went to Endurance last spring, the cage was built for show and street use. The cage is built with high quality materials and is more than rigid enough for my purposes, however Mike expressed that if someone wanted to use this cage for class racing he would much rather have the car and build a cage specific to that car. So that being said, who's looking for a cage for street and show use? Yes, the cage is rigid enough to use with a harness so this option can replace other options of the same variety on the market for just a fraction more in cost. I would also assume the cost of a raw, un-powdercoated cage will be about $900 plus shipping. I'm planning on taking my car to Endurance towards the end of March for some other work so, depending on interest these could be ready as soon as late April. Im not asking for any sort of payment. Right now I just want to gauge interest at a more serious level so here starts a list. Lets see how many we have on board. 1) wiggins3377 2) tturbo370z 3) Rusty 4) 5) 6) 7) 8) 9) 10) I do trackdays. The track I go to doesn't have any rules for a cage. But in the future. I'm planning on going to other tracks. And I don't know if they have any rules for cages. So I would like to be safe and not sorry if it was built to someone's spec's. Wiggins3377 likes this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

02-25-2015, 03:13 PM	#32 (permalink)
chops A True Z Fanatic Join Date: Oct 2010 Location: NA Posts: 1,732 Drives: NA Rep Power: 22	remember folks, unless you're wearing a helmet whenever you're driving your car, you dont want to go and run a roll cage. running one on the streets as a daily driver can kill you in an accident even if the entire cage is properly cushioned with foam..etc. you need a full 5 point harness, and proper seats before you go buying a roll cage!

02-25-2015, 03:50 PM	#34 (permalink)
nissan_fan Base Member Join Date: Feb 2012 Location: PR Posts: 123 Drives: 2012 370z PW M6 Rep Power: 13	In for final price on these beauties

02-26-2015, 12:22 AM	#41 (permalink)
PheeNoIVI Base Member Join Date: Aug 2014 Location: Santa Rosa CA Posts: 53 Drives: 2014 Nissan 370z Rep Power: 11	Add me to the list of interested buyers! Wiggins3377 likes this.

02-26-2015, 08:28 AM	#42 (permalink)
Wiggins3377 A True Z Fanatic Join Date: Jul 2011 Location: Cincinnati Posts: 3,236 Drives: 40th 370 Rep Power: 77	Added PheeNoIVI to the list. 1) wiggins3377 2) tturbo370z 3) Rusty 4) PheeNoIVI 5) 6) 7) 8) 9) 10) __________________ AccuAir/ AirRex/ Amuse/ Bride Japan/ Carbon Fiber Element/ Carbon Signal/ Evo-R/ NRG/ Project Kics/ Samco/ Shine Auto/ SPC/ SPL/ Stance/ Stillen/ Takata/ Top Secret/ Work

02-26-2015, 11:33 AM	#43 (permalink)
AntiVenom Track Member Join Date: Nov 2014 Location: North Carolina Posts: 695 Drives: 2011 KAD 6MT Rep Power: 12	highly interested but only if it would be NASA or at minimum SCCA legal. So I guess that means don't add me to the list.

02-26-2015, 11:39 AM	#44 (permalink)
bullitt5897 Premium Member Join Date: Jan 2009 Location: North GA Posts: 6,831 Drives: Twin Turbo Z34 Rep Power: 3682	There is a street version too... If you don't want the race spec version __________________ *Shop Cars: 2013 318whp Nismo VspecII 370z SOLD, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054*

02-26-2015, 11:40 AM	#45 (permalink)
bullitt5897 Premium Member Join Date: Jan 2009 Location: North GA Posts: 6,831 Drives: Twin Turbo Z34 Rep Power: 3682	1) wiggins3377 2) tturbo370z 3) Rusty 4) PheeNoIVI 5) bullitt5897 (white dragon) 6) bullitt5897 (VSPEC II) 7) 8) 9) 10) Wiggins3377 likes this. __________________ *Shop Cars: 2013 318whp Nismo VspecII 370z SOLD, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054*

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Roll Cage anyone??	Reaper42	Exterior & Interior	23	11-02-2015 02:25 PM
Repainting my 4pt Cage	Mozen	Exterior & Interior	3	06-30-2013 01:19 AM
Harness Bar vs 4 pt cage vs full cage	ENT-Z	Track / Autocross / Drifting / Dragstrip	19	12-26-2012 09:00 PM
Bolt on Roll Bar/Cage	Calvin	Exterior & Interior	8	08-27-2012 05:00 PM