The 370Z Weight Reduction Thread

SPOHN · 07-15-2012, 11:45 AM

Quote:

Originally Posted by kcquinn49

Question for WSTAR: How much does the plastic engine cover weigh? Does it serve any purpose other than cosmetic?

Doesn't weigh hardly anything. For me it traps heat.

KaienZ34 · 07-15-2012, 12:08 PM

Quote:

Originally Posted by kcquinn49

Question for WSTAR: How much does the plastic engine cover weigh? Does it serve any purpose other than cosmetic?

Just cosmetic.

cavemancan · 07-16-2012, 09:59 AM

As far as the exhaust...I am actually worried about loosing too Much weight in the rear. Remember my goal is balance. I know many will say that can be tuned out but also take into consideration that I have not spent the money on adjustable suspension yet and this car will be tracked.

I can not justify a super light weight exhaust (from the CAT's back). So from the CAT's back I am aiming for power not weight. Header and CAT's are a different story though...that will be as lite as possible.

wstar · 07-16-2012, 12:52 PM

I wouldn't get too worried about the balance. I mean, I try to keep balance in mind, but I've definitely dropped a lot more weight from the rear than the front in the net, seeing as I've probably added front weight with things like my add-on coolers, the G3 intakes, the oilpan, the z-speed tray, etc. Whereas the rear of my car is completely stripped to the metal at this point in the interior, there's nothing aft of the seats but the airbag controller box, minimal wiring (I removed all unnecc harness wiring), and my relocated battery.

Car still handles fine with a mostly-full tank of gas (required on track until a fuel starve fix is commercially available), and my rear swaybar is still set to full stiff (if the rear got so light as to make the rear too skippy, I could soften the rear sway setting to offset a bit). I'll be more worried about balance once I can run lower on gas w/ phunk's upcoming fuel surge fixup.

SPOHN · 07-16-2012, 01:04 PM

^ more reason to run wider tires up front to handle load. Wouldn't you say?

cavemancan · 07-16-2012, 04:33 PM

Quote:

Originally Posted by SPOHN

^ more reason to run wider tires up front to handle load. Wouldn't you say?

This is true no matter how you slice it.

cavemancan · 07-16-2012, 04:34 PM

Quote:

Originally Posted by wstar

I wouldn't get too worried about the balance. I mean, I try to keep balance in mind, but I've definitely dropped a lot more weight from the rear than the front in the net, seeing as I've probably added front weight with things like my add-on coolers, the G3 intakes, the oilpan, the z-speed tray, etc. Whereas the rear of my car is completely stripped to the metal at this point in the interior, there's nothing aft of the seats but the airbag controller box, minimal wiring (I removed all unnecc harness wiring), and my relocated battery.

Car still handles fine with a mostly-full tank of gas (required on track until a fuel starve fix is commercially available), and my rear swaybar is still set to full stiff (if the rear got so light as to make the rear too skippy, I could soften the rear sway setting to offset a bit). I'll be more worried about balance once I can run lower on gas w/ phunk's upcoming fuel surge fixup.

What's your current setup if you don't mind me asking?

Edit: Never mind...clicked sig...lol

Kingbaby · 07-16-2012, 05:16 PM

you can also corner balance your car!

cavemancan · 07-16-2012, 07:46 PM

Quote:

Originally Posted by Kingbaby

you can also corner balance your car!

Um...you have to have adjustable suspension for that.

SPOHN · 07-16-2012, 08:01 PM

Quote:

Originally Posted by cavemancan

Um...you have to have adjustable suspension for that.

Just coilovers to corner balance. Adjustable suspension for alignment.

Kingbaby · 07-16-2012, 09:22 PM

Quote:

Originally Posted by cavemancan

Um...you have to have adjustable suspension for that.

figuerd you'd have those if your in this thread!

cavemancan · 07-17-2012, 12:00 AM

I meantioned before I didn't...Mostly due to the fact that I've only had the car for a few months now. Eventually it will be a possibility but not yet. So my intention is to optimize what I have.

cavemancan · 08-06-2012, 11:53 AM

Question: I read somewhere that someone modified their hood to make it lighter. Anyone have a DIY or more information/pics they could share I am really interested in this?

BTW...

I decided to go with Fast Intensions after hearing the FI cat back plus LTH combo...simply put...HAAAAMAZING!

Question2: I'm researching wheels. For obvious reasons Forgestar F14's are popular but I am not sure I like them (although I recently saw a set with the dark bronze finish that actually looked good). Do you all know of any wheel under $3k that comes close to 23 lbs and is a 19x11?

KingJoseph · 08-06-2012, 03:33 PM

The Berk Cats are 5.5 lbs a piece for 11 lbs total, versus 21 lbs for stock.

Shamu · 08-13-2012, 10:28 PM

Anyone gut stock hood yet? I'm thinking that's best approach. I'm selling boat anchor Siebon TS hood cheep!

How about gutting rear hatch too and then installing plexiglas ? Weight savings?

07-16-2012, 09:59 AM	#618 (permalink)
cavemancan Enthusiast Member Join Date: Mar 2012 Location: Miami Posts: 302 Drives: 09 370Z TourSport MT Rep Power: 249	As far as the exhaust...I am actually worried about loosing too Much weight in the rear. Remember my goal is balance. I know many will say that can be tuned out but also take into consideration that I have not spent the money on adjustable suspension yet and this car will be tracked. I can not justify a super light weight exhaust (from the CAT's back). So from the CAT's back I am aiming for power not weight. Header and CAT's are a different story though...that will be as lite as possible. __________________ Mazda Rx8 MT Titanium - SOLD! 2009 370Z T-Sport MT Black - Takeda Intake, Swift springs, Rear Camber kit, SS B Lines, FI Exhaust, Z Speed CMAK Flywheel/Clutch Kit, Stillen Brake Cooling.

07-16-2012, 12:52 PM	#619 (permalink)
wstar A True Z Fanatic Join Date: Mar 2009 Location: Houston, TX Posts: 4,024 Drives: too slow Rep Power: 3594	I wouldn't get too worried about the balance. I mean, I try to keep balance in mind, but I've definitely dropped a lot more weight from the rear than the front in the net, seeing as I've probably added front weight with things like my add-on coolers, the G3 intakes, the oilpan, the z-speed tray, etc. Whereas the rear of my car is completely stripped to the metal at this point in the interior, there's nothing aft of the seats but the airbag controller box, minimal wiring (I removed all unnecc harness wiring), and my relocated battery. Car still handles fine with a mostly-full tank of gas (required on track until a fuel starve fix is commercially available), and my rear swaybar is still set to full stiff (if the rear got so light as to make the rear too skippy, I could soften the rear sway setting to offset a bit). I'll be more worried about balance once I can run lower on gas w/ phunk's upcoming fuel surge fixup. __________________ 7AT Track Car! Journal thread / Car setup details

07-16-2012, 01:04 PM	#620 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	^ more reason to run wider tires up front to handle load. Wouldn't you say? __________________

07-17-2012, 12:00 AM	#627 (permalink)
cavemancan Enthusiast Member Join Date: Mar 2012 Location: Miami Posts: 302 Drives: 09 370Z TourSport MT Rep Power: 249	I meantioned before I didn't...Mostly due to the fact that I've only had the car for a few months now. Eventually it will be a possibility but not yet. So my intention is to optimize what I have. __________________ Mazda Rx8 MT Titanium - SOLD! 2009 370Z T-Sport MT Black - Takeda Intake, Swift springs, Rear Camber kit, SS B Lines, FI Exhaust, Z Speed CMAK Flywheel/Clutch Kit, Stillen Brake Cooling.

08-06-2012, 11:53 AM	#628 (permalink)
cavemancan Enthusiast Member Join Date: Mar 2012 Location: Miami Posts: 302 Drives: 09 370Z TourSport MT Rep Power: 249	Question: I read somewhere that someone modified their hood to make it lighter. Anyone have a DIY or more information/pics they could share I am really interested in this? BTW... I decided to go with Fast Intensions after hearing the FI cat back plus LTH combo...simply put...HAAAAMAZING! Question2: I'm researching wheels. For obvious reasons Forgestar F14's are popular but I am not sure I like them (although I recently saw a set with the dark bronze finish that actually looked good). Do you all know of any wheel under $3k that comes close to 23 lbs and is a 19x11? __________________ Mazda Rx8 MT Titanium - SOLD! 2009 370Z T-Sport MT Black - Takeda Intake, Swift springs, Rear Camber kit, SS B Lines, FI Exhaust, Z Speed CMAK Flywheel/Clutch Kit, Stillen Brake Cooling.

08-06-2012, 03:33 PM	#629 (permalink)
KingJoseph Base Member Join Date: Jun 2012 Location: Redmond, WA Posts: 180 Drives: 2012 Nismo 370Z Rep Power: 13	The Berk Cats are 5.5 lbs a piece for 11 lbs total, versus 21 lbs for stock.

08-13-2012, 10:28 PM	#630 (permalink)
Shamu A True Z Fanatic Join Date: Jan 2011 Location: Nor Cal Posts: 1,059 Drives: 370Z Racecar Rep Power: 19	Anyone gut stock hood yet? I'm thinking that's best approach. I'm selling boat anchor Siebon TS hood cheep! How about gutting rear hatch too and then installing plexiglas ? Weight savings? __________________ Grant

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
370z Sport Package Weight??	drisko	Nissan 370Z General Discussions	12	02-09-2009 11:47 AM
Weight of stock wheels?	sbkim	Wheels & Tires	9	01-13-2009 10:57 PM