Moonbeam spoiler test fit

CarbonSignal · 01-22-2015, 02:29 AM

Quote:

Originally Posted by cooltoy

He has a base, so no holes in the trunk. He is wondering the best way to mount it. Whether it is by drilling holes, or using something else. So you are recommending silicone without drilling?

No real need for drilling if a good silicone is used.

Just sand both spoiler and trunk nicely or let some professional install it.

Wiggins3377 · 01-22-2015, 08:40 AM

Quote:

Originally Posted by CarbonSignal

No real need for drilling if a good silicone is used.

Just sand both spoiler and trunk nicely or let some professional install it.

that's what my body shop did.

axmea? · 01-22-2015, 09:00 AM

Use the transfer technique. Use small zip ties. Secure the zip tie to the spoiler's mounting hole using a small amount of masking tape where tab end lands at the center of the hole. Repeat this process to the holes you want to use to bolt the spoiler. 4 is enough. Set your spoiler on the hatch checking for eveness and if centered. Better to have help holding the spoiler down. Transfer the zip ties onto the hatch by firmly holding the tie and taping it onto the hatch. Lift your spoiler off slowly. Get a sharpie to mark where the tab lands and that's your drill mark for your spoiler holes. Hope this helps.

Merv · 01-22-2015, 09:28 AM

Quote:

Originally Posted by virtuosoondis

Thanks guys I'll prob do that but if I do the template what's gonna hold the screw?

If the bottom plastic piece on the inside of the hatch comes off,it should expose the metal on the inside?

virtuosoondis · 01-22-2015, 03:12 PM

Thanks fellas I really appreciate feedback.dont really wanna go to shop unless I need to cause I like to learn how to do these things.

Zbrah · 01-22-2015, 03:22 PM

Quote:

Originally Posted by axmea?

Use the transfer technique. Use small zip ties. Secure the zip tie to the spoiler's mounting hole using a small amount of masking tape where tab end lands at the center of the hole. Repeat this process to the holes you want to use to bolt the spoiler. 4 is enough. Set your spoiler on the hatch checking for eveness and if centered. Better to have help holding the spoiler down. Transfer the zip ties onto the hatch by firmly holding the tie and taping it onto the hatch. Lift your spoiler off slowly. Get a sharpie to mark where the tab lands and that's your drill mark for your spoiler holes. Hope this helps.

Took me a while to picture the process but I finally gets it. Brilliant idea Rafael!

cooltoy · 01-22-2015, 03:36 PM

Kind of like my fluid idea, but way easier.

Bananaz · 04-09-2015, 10:20 PM

I want this so bad!

01-22-2015, 09:00 AM	#33 (permalink)
axmea? A True Z Fanatic Join Date: Apr 2012 Location: SoCal Posts: 6,236 Drives: WELL ZED PW 6MT Rep Power: 53241	Use the transfer technique. Use small zip ties. Secure the zip tie to the spoiler's mounting hole using a small amount of masking tape where tab end lands at the center of the hole. Repeat this process to the holes you want to use to bolt the spoiler. 4 is enough. Set your spoiler on the hatch checking for eveness and if centered. Better to have help holding the spoiler down. Transfer the zip ties onto the hatch by firmly holding the tie and taping it onto the hatch. Lift your spoiler off slowly. Get a sharpie to mark where the tab lands and that's your drill mark for your spoiler holes. Hope this helps. cooltoy likes this. __________________ >MyZ's Album< NISMO Convert/ECUTEK/Takeda CAI/F.I. HFC NR CB Carbon/F.I. 34 Row Oil Cooler/4.08 Final Drive /Powertrix+Swifts/Hotchkis/SPL/Whiteline/TWM/Zoom Engineering/EVO-R/AeroJacket Vented CF Fenders + CF Spoiler/Avant Garde-WORK/NST/Morimoto Halo/STi Clear Lenses/Carbon Signal Automotive/RJM Performance/ZSpeed Clutch Flywheel CSC delete Last edited by axmea?; 01-22-2015 at 09:03 AM.

01-22-2015, 03:12 PM	#35 (permalink)
virtuosoondis Enthusiast Member Join Date: Jun 2011 Location: texas Posts: 301 Drives: 11 black nissan 370z Rep Power: 14	Thanks fellas I really appreciate feedback.dont really wanna go to shop unless I need to cause I like to learn how to do these things. __________________ from dat 671

01-22-2015, 03:36 PM	#37 (permalink)
cooltoy Elite Member Join Date: Jun 2012 Location: Calgary Posts: 13,973 Drives: 14 PW 370Z S/T MT Rep Power: 243722	Kind of like my fluid idea, but way easier. axmea? likes this. __________________ Member of kenchan's "photoshopped mods" and "proper offsets" gang.

04-09-2015, 10:20 PM	#38 (permalink)
Bananaz Track Member Join Date: Dec 2013 Location: Central Jersey Posts: 637 Drives: 09 370z 6MT/B+Sport Rep Power: 14	I want this so bad! __________________ BC - SSR - Evo-R - ViS - SPC - ZSpeed - Beluga - Blox - 35% Tint - Clutch Spring - Fang Forced Air Ducting

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
CS MoonBeam Individual Items GB	CarbonSignal	Body Interior/Exterior	152	05-20-2017 04:00 PM
[FOR SALE] Rear Moonbeam Overfenders	Wiggins3377	Parts for sale (Private Classifieds)	32	01-22-2015 03:26 PM
CS wants to Sponsor Moonbeam kit	CarbonSignal	Nissan 370Z General Discussions	26	07-07-2014 07:21 AM
MoonBeam Widebody kit from Carbonsignal	CarbonSignal	Exterior & Interior	271	06-02-2014 05:45 AM
anyone test fit a spoiler?	BalanBro	Nissan 370Z Roadster (Convertible)	2	03-23-2010 01:33 PM