Custom ported and CNC throttle bodies, upper and lower manifolds

Spartan 1771 · 09-26-2017, 10:14 PM

Quote:

Originally Posted by synolimit

Of course, I'll just need it sent in. You don't want the M370 ported though??

Actually I would. I didn't know if that was an option. How much would that cost?

synolimit · 09-30-2017, 01:29 PM

Quote:

Originally Posted by Spartan 1771

Actually I would. I didn't know if that was an option. How much would that cost?

The HR im actually gonna start charging $250 for vs $230 as the extra 2-3in is a PITA to get into.

Spartan 1771 · 09-30-2017, 01:33 PM

Quote:

Originally Posted by synolimit

The HR im actually gonna start charging $250 for vs $230 as the extra 2-3in is a PITA to get into.

I'm interested in that as well as the lower, but I just had the car tuned, did brakes and tires, so this will have to wait until the spring. I'm outta cash for right now. When I'm ready I'll contact you. Do you have a better way for me to contact you? If so, you can PM it to me.

JLarson · 10-09-2017, 12:23 PM

This weekend, I helped Socce install the Syno kit (TBs, Upper and Lower) on his Z. The kit looked great, very nicely ported/polished, and Syno was very responsive to messages.

socce · 10-09-2017, 06:54 PM

Quote:

Originally Posted by JLarson

This weekend, I helped Socce install the Syno kit (TBs, Upper and Lower) on his Z. The kit looked great, very nicely ported/polished, and Syno was very responsive to messages.

Yes ! Kit installed ! Kit was suppose to be put on with a g3 CAI but I was actually sold a g37 version from a member on here so had to put back on stock intakes.

Car ran perfectly on the ride home with no code troubles. I believe I could feel more torque in the mid/high end. Some z1 slotted rotors were also replaced in the front at the this time as well though so it's a combo.

I have AAM intakes on order currently and hoping to have a tune done in the next few weeks. Will report in on numbers then.

Big thanks to Scott for his well-done kit and a trouble free experience. And a huge thanks Josh (JLarson) for the well executed smooth install.

Now to just ship out the cores.

synolimit · 11-01-2017, 09:14 AM

Sounds great guys! Socce I believe I got g37's g3's at one point too. I just made them fit. Later I cut out the sharper bend after the filters and made more of a 90* bend. But I do believe bigger is better. I showed better numbers with my custom 2.75" vs the g3's. Currently I'm building a custom 3" intake.

SS_Firehawk · 11-01-2017, 09:41 AM

Just to drop some kudos on Synolimit's parts; made some good power using them. It's just a piece of the puzzle, but at this power level being N/A, every mod counts

Spartan 1771 · 11-01-2017, 12:43 PM

Get ready for the haters. When I posted my dyno sheet on here in other threads last month, everyone and their brother commented negatively on the numbers. My car was dynoed at 344.2 whp and 276 torque.

SS_Firehawk · 11-01-2017, 01:17 PM

Yeah, haters will hate regardless. Because it's not a "dynojet", haters will hate and then season it with more hate.

Spartan 1771 · 11-01-2017, 02:11 PM

Quote:

Originally Posted by SS_Firehawk

Yeah, haters will hate regardless. Because it's not a "dynojet", haters will hate and then season it with more hate.

I was dynoed on a Dyno-Dynamics. Funny thing is, everything I have heard and read says their numbers are usually lower then a Dynojet.

SS_Firehawk · 11-01-2017, 02:38 PM

Quote:

Originally Posted by Spartan 1771

I was dynoed on a Dyno-Dynamics. Funny thing is, everything I have heard and read says their numbers are usually lower then a Dynojet.

There's so much variation that it can read +/- 10%. You can change load variables to simulate speed, aerodynamics, roads, grades,elevation, temps, etc. It makes for a great tuning tool, but it's best to use the same dyno, especially before and after mods; when it's not a dynojet. I've seen some dynos where they have basic bolt ons and it shows 350whp. Your 344/276 is most likely in that ball park on a dynojet. It just depends on temps, elevation, and humidity.

Jimbo370 · 11-22-2017, 09:21 PM

Getting ready to change sparkplugs at 95k so I thought this would be a good time to swap out. Do you have any ready to send. Does it still cost $330 thru paypal? THANKS

synolimit · 11-23-2017, 10:10 AM

Quote:

Originally Posted by Jimbo370

Getting ready to change sparkplugs at 95k so I thought this would be a good time to swap out. Do you have any ready to send. Does it still cost $330 thru paypal? THANKS

Yes it does but none ready for shipping. I port as I go.

synolimit · 12-11-2017, 04:14 AM

I can also be reached on Facebook at Scott Thomas with a pic of my Z on the track.

BlKsUbYkId · 01-11-2018, 08:20 PM

PM'ed

10-09-2017, 12:23 PM	#274 (permalink)
JLarson A True Z Fanatic Join Date: Jun 2017 Location: Media, PA Posts: 4,074 Drives: 14 Nissan 370z MR M6 Rep Power: 2684370	This weekend, I helped Socce install the Syno kit (TBs, Upper and Lower) on his Z. The kit looked great, very nicely ported/polished, and Syno was very responsive to messages. Spartan 1771, synolimit and socce like this. __________________ 2014 370z Touring Sport Magma Red MT // BP Single Turbo 6467 // 63mm TB's // Z1 Ported Upper Mani // RJM Pedal // Zspeed Stage 3 Clutch // 526 WHP, 451 WTQ 2006 350z (Sold) // 1990 300zx (Sold) // 1985 300zx 2+2 (Sold)

11-01-2017, 09:14 AM	#276 (permalink)
synolimit A True Z Fanatic Join Date: May 2013 Location: Columbus, OH Posts: 5,051 Drives: 2013 Silver 370z Rep Power: 3389	Sounds great guys! Socce I believe I got g37's g3's at one point too. I just made them fit. Later I cut out the sharper bend after the filters and made more of a 90* bend. But I do believe bigger is better. I showed better numbers with my custom 2.75" vs the g3's. Currently I'm building a custom 3" intake. socce and JLarson like this. __________________ 13 370z-

11-01-2017, 09:41 AM	#277 (permalink)
SS_Firehawk Premium Member Join Date: Oct 2011 Location: Tampa Posts: 4,142 Drives: 13' Magma Red Nismo Rep Power: 7335	Just to drop some kudos on Synolimit's parts; made some good power using them. It's just a piece of the puzzle, but at this power level being N/A, every mod counts Spartan 1771, synolimit, Kzonts and 1 others like this. __________________ Old Car:GTM TSC'd 550whp / 410lbft tq @ 11.88PSI New Car: Under Construction Last edited by SS_Firehawk; 11-01-2017 at 12:24 PM.

11-01-2017, 12:43 PM	#278 (permalink)
Spartan 1771 A True Z Fanatic Join Date: Nov 2009 Location: Western Maryland Posts: 1,280 Drives: Wife crazy & 09 370Z Rep Power: 105454	Get ready for the haters. When I posted my dyno sheet on here in other threads last month, everyone and their brother commented negatively on the numbers. My car was dynoed at 344.2 whp and 276 torque. SS_Firehawk and socce like this. __________________ ~Rob -DD Air Guide, Stillen G3 CAIs, 63mm Throttle Bodies, Motordyne M370, Berk HFCs, FI TDX CBE (non-res, CF), Sprint booster v3, Ecutek Dyno Tuned, and the list goes on...

11-01-2017, 01:17 PM	#279 (permalink)
SS_Firehawk Premium Member Join Date: Oct 2011 Location: Tampa Posts: 4,142 Drives: 13' Magma Red Nismo Rep Power: 7335	Yeah, haters will hate regardless. Because it's not a "dynojet", haters will hate and then season it with more hate. Spartan 1771 likes this. __________________ Old Car:GTM TSC'd 550whp / 410lbft tq @ 11.88PSI New Car: Under Construction

11-22-2017, 09:21 PM	#282 (permalink)
Jimbo370 Enthusiast Member Join Date: Jan 2014 Location: Florida Posts: 466 Drives: 09 black 370z MT Rep Power: 11	upper manifold porting Getting ready to change sparkplugs at 95k so I thought this would be a good time to swap out. Do you have any ready to send. Does it still cost $330 thru paypal? THANKS

12-11-2017, 04:14 AM	#284 (permalink)
synolimit A True Z Fanatic Join Date: May 2013 Location: Columbus, OH Posts: 5,051 Drives: 2013 Silver 370z Rep Power: 3389	I can also be reached on Facebook at Scott Thomas with a pic of my Z on the track. Spartan 1771 likes this. __________________ 13 370z-

01-11-2018, 08:20 PM	#285 (permalink)
BlKsUbYkId Base Member Join Date: Nov 2012 Location: Socal Posts: 190 Drives: '13 PG Nismo Rep Power: 13	PM'ed synolimit likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Custom ported and CNC throttle bodies, upper and lower manifolds by Synergy Composite	synolimit	Intake/Exhaust	799	03-11-2015 02:43 AM
Smokeys dyno, ported TB's, manifolds etc	synolimit	Tuning	8	08-15-2014 12:11 PM
can the throttle bodies be taken off?	boomboom	Engine & Drivetrain	9	11-03-2013 02:46 PM
Kinetix 370Z/G37 Velocity Upper Intake Manifolds - Z1 Motorsports	Dustin@Z1	Intake/Exhaust	151	03-18-2013 10:37 AM