Motion Lab has all the best power adders from Invidia, HKS, Stillen, M7 and AEM!!

Motion Lab

It is Tuesday June 25th and Motion Lab Tuning is your go to place for your bolt on 370z performance. Here are a few other great products you can contact us about.


Berk Technologies 370Z/G37 High Flow Catalytic Converters: Metallic substrate spun catalytic converters, OBDII & 49 state compliant. Full stainless steel construction. Metallic substrate offers higher flow and lighter weight. Uses advanced spiral wound ultra thin foil. Includes our custom made soft crush graphite collector gaskets for a leak free seal. These are made specifically for the new HR motor by BERK. Made with pride in the USA. Fits VQ35HR & VQ37HR Motors:

• 2009-up 370Z
• 2007-2008 350Z
• 2008-up G37 Coupe
• 2007-up G35 Sedan

The STILLEN Z/G Headers: The STILLEN Z/G Headers are the finest available. With months invested in development work, these headers produce big increases in streetable power and torque on both naturally aspirated and forced induction vehicles. The equal length design of the headers allows better and more efficient exhaust scavenging which contributes to the dyno tested performance gains. Examples:

• 2004 350Z produced 11.5 hp at @ 6200 RPM and 18.5-lb.ft @ 3800 RPM at the wheels
• 2008 G37 Coupe produced 14.5hp at @ 7300 RPM and 12.5 lb-ft @ 4200 RPM at the wheels

STILLEN manufactures our high performance headers from varying materials according to application parameters. All of our uncoated headers are stainless steel for long life and corrosion resistance. Our ceramic coated headers are for those who want an additional thermal barrier to lower engine bay temperatures as well as excellent stain and rust resistance. These hand crafted shorty headers do not require the removal of the catalytic converters. Headers are available in the following materials:

• 304 Stainless Steel - Maximum oxidation and corrosion resistance, excellent shine
• 409 Stainless Steel - Excellent corrosion resistance, may develop light surface discoloring
• Ceramic Coated - Provides a thermal barrier which reduces radiated heat into the engine bay, excellent stain and rust resistance

PM, call, or E-mail for most up to date pricing! Other parts available such as Stainless steel brake lines from StopTech performance and Goodridge. High temp brake fluid available from MOTUL, ATE, and StopTech. We are open Monday - Friday 9AM EST to 6PM EST and Saturdays 10AM to 1PM. You can contact us via forum messaging, E-mail, and telephone. As always if you don't see it, just ask!



Thanks for looking!
Alex Goodwin
AlexG@motionlabtuning.com
MotionLabTuning.com - Engineering Performance

Motion Lab

It is Wednesday June 26th and Motion Lab Tuning is your go to place for your bolt on 370z performance. Here are a few other great products you can contact us about.


Berk Technologies 370Z/G37 High Flow Catalytic Converters: Metallic substrate spun catalytic converters, OBDII & 49 state compliant. Full stainless steel construction. Metallic substrate offers higher flow and lighter weight. Uses advanced spiral wound ultra thin foil. Includes our custom made soft crush graphite collector gaskets for a leak free seal. These are made specifically for the new HR motor by BERK. Made with pride in the USA. Fits VQ35HR & VQ37HR Motors:

• 2009-up 370Z
• 2007-2008 350Z
• 2008-up G37 Coupe
• 2007-up G35 Sedan

The STILLEN Z/G Headers: The STILLEN Z/G Headers are the finest available. With months invested in development work, these headers produce big increases in streetable power and torque on both naturally aspirated and forced induction vehicles. The equal length design of the headers allows better and more efficient exhaust scavenging which contributes to the dyno tested performance gains. Examples:

• 2004 350Z produced 11.5 hp at @ 6200 RPM and 18.5-lb.ft @ 3800 RPM at the wheels
• 2008 G37 Coupe produced 14.5hp at @ 7300 RPM and 12.5 lb-ft @ 4200 RPM at the wheels

STILLEN manufactures our high performance headers from varying materials according to application parameters. All of our uncoated headers are stainless steel for long life and corrosion resistance. Our ceramic coated headers are for those who want an additional thermal barrier to lower engine bay temperatures as well as excellent stain and rust resistance. These hand crafted shorty headers do not require the removal of the catalytic converters. Headers are available in the following materials:

• 304 Stainless Steel - Maximum oxidation and corrosion resistance, excellent shine
• 409 Stainless Steel - Excellent corrosion resistance, may develop light surface discoloring
• Ceramic Coated - Provides a thermal barrier which reduces radiated heat into the engine bay, excellent stain and rust resistance

PM, call, or E-mail for most up to date pricing! Other parts available such as Stainless steel brake lines from StopTech performance and Goodridge. High temp brake fluid available from MOTUL, ATE, and StopTech. We are open Monday - Friday 9AM EST to 6PM EST and Saturdays 10AM to 1PM. You can contact us via forum messaging, E-mail, and telephone. As always if you don't see it, just ask!



Thanks for looking!
Alex Goodwin
AlexG@motionlabtuning.com
MotionLabTuning.com - Engineering Performance

Motion Lab

It is Thursday June 27th and Motion Lab Tuning is your go to place for your bolt on 370z performance. Here are a few other great products you can contact us about.


Berk Technologies 370Z/G37 High Flow Catalytic Converters: Metallic substrate spun catalytic converters, OBDII & 49 state compliant. Full stainless steel construction. Metallic substrate offers higher flow and lighter weight. Uses advanced spiral wound ultra thin foil. Includes our custom made soft crush graphite collector gaskets for a leak free seal. These are made specifically for the new HR motor by BERK. Made with pride in the USA. Fits VQ35HR & VQ37HR Motors:

• 2009-up 370Z
• 2007-2008 350Z
• 2008-up G37 Coupe
• 2007-up G35 Sedan

The STILLEN Z/G Headers: The STILLEN Z/G Headers are the finest available. With months invested in development work, these headers produce big increases in streetable power and torque on both naturally aspirated and forced induction vehicles. The equal length design of the headers allows better and more efficient exhaust scavenging which contributes to the dyno tested performance gains. Examples:

• 2004 350Z produced 11.5 hp at @ 6200 RPM and 18.5-lb.ft @ 3800 RPM at the wheels
• 2008 G37 Coupe produced 14.5hp at @ 7300 RPM and 12.5 lb-ft @ 4200 RPM at the wheels

STILLEN manufactures our high performance headers from varying materials according to application parameters. All of our uncoated headers are stainless steel for long life and corrosion resistance. Our ceramic coated headers are for those who want an additional thermal barrier to lower engine bay temperatures as well as excellent stain and rust resistance. These hand crafted shorty headers do not require the removal of the catalytic converters. Headers are available in the following materials:

• 304 Stainless Steel - Maximum oxidation and corrosion resistance, excellent shine
• 409 Stainless Steel - Excellent corrosion resistance, may develop light surface discoloring
• Ceramic Coated - Provides a thermal barrier which reduces radiated heat into the engine bay, excellent stain and rust resistance

PM, call, or E-mail for most up to date pricing! Other parts available such as Stainless steel brake lines from StopTech performance and Goodridge. High temp brake fluid available from MOTUL, ATE, and StopTech. We are open Monday - Friday 9AM EST to 6PM EST and Saturdays 10AM to 1PM. You can contact us via forum messaging, E-mail, and telephone. As always if you don't see it, just ask!



Thanks for looking!
Alex Goodwin
AlexG@motionlabtuning.com
MotionLabTuning.com - Engineering Performance

Motion Lab

It is Friday June 28th and Motion Lab Tuning is your go to place for your bolt on 370z performance. Here are a few other great products you can contact us about.

HKS 370Z High Power cat-back: Inspired and designed from endurance and GT racing in Japan, HKS developed its Hi-Power Exhaust system for both turbocharged and naturally aspirated applications. HKS has incorporated this new race inspired offset muffler and piping design into many street applications, which offers a greater flow and higher-PRM power gains due to the less restrictive design. This is achieved by eliminating unnecessary bends for the straightest exhaust path. For turbocharged applications, the large and smooth exhaust flow allows greater exhaust velocity for better mid-range boost response and high-RPM power. Naturally aspirated vehicles also benefit from greater exhaust flow capacity as engine tuning levels increase. Certain applications are available in a Silent Hi-Power version which has an inner silencer built into the muffler. Like Drager Exhaust systems, Hi-Power Exhaust systems are made from SUS304 stainless steel muffler and tip assemblies.

Injen Air Intake - SP Series Intake System: The Injen SP Series Intake Systems Feature the Patent Pending MR Technology Process for Optimal Gains and a Safe A/F Ratio. The Injen SP Series Intake System does not limit itself to just a Cold Air System or Short Ram System. The MR Technology process has its effects on both types. The Injen SP Series Intake is The World's First Tuned Intake System. For over a decade Injen Technology Co. Ltd and our sister company has played a major roll in the design and development of air intake systems. Injen Technology is based out of California in the same city and just a few miles away from the famous Pomona Winter Nationals Top Fuel Raceway. Injen Technology's history is a classic success story of a small manufacturing company turned industry leader of aftermarket performance products.


PM, call, or E-mail for most up to date pricing! Other parts available such as Stainless steel brake lines from StopTech performance and Goodridge. High temp brake fluid available from MOTUL, ATE, and StopTech. We are open Monday - Friday 9AM EST to 6PM EST and Saturdays 10AM to 1PM. You can contact us via forum messaging, E-mail, and telephone. As always if you don't see it, just ask!



Thanks for looking!
Alex Goodwin
AlexG@motionlabtuning.com
MotionLabTuning.com - Engineering Performance

Motion Lab

It is Tuesday July 2nd and Motion Lab Tuning is your go to place for your bolt on 370z performance. Here are a few other great products you can contact us about.

HKS 370Z High Power cat-back: Inspired and designed from endurance and GT racing in Japan, HKS developed its Hi-Power Exhaust system for both turbocharged and naturally aspirated applications. HKS has incorporated this new race inspired offset muffler and piping design into many street applications, which offers a greater flow and higher-PRM power gains due to the less restrictive design. This is achieved by eliminating unnecessary bends for the straightest exhaust path. For turbocharged applications, the large and smooth exhaust flow allows greater exhaust velocity for better mid-range boost response and high-RPM power. Naturally aspirated vehicles also benefit from greater exhaust flow capacity as engine tuning levels increase. Certain applications are available in a Silent Hi-Power version which has an inner silencer built into the muffler. Like Drager Exhaust systems, Hi-Power Exhaust systems are made from SUS304 stainless steel muffler and tip assemblies.

Injen Air Intake - SP Series Intake System: The Injen SP Series Intake Systems Feature the Patent Pending MR Technology Process for Optimal Gains and a Safe A/F Ratio. The Injen SP Series Intake System does not limit itself to just a Cold Air System or Short Ram System. The MR Technology process has its effects on both types. The Injen SP Series Intake is The World's First Tuned Intake System. For over a decade Injen Technology Co. Ltd and our sister company has played a major roll in the design and development of air intake systems. Injen Technology is based out of California in the same city and just a few miles away from the famous Pomona Winter Nationals Top Fuel Raceway. Injen Technology's history is a classic success story of a small manufacturing company turned industry leader of aftermarket performance products.


PM, call, or E-mail for most up to date pricing! Other parts available such as Stainless steel brake lines from StopTech performance and Goodridge. High temp brake fluid available from MOTUL, ATE, and StopTech. We are open Monday - Friday 9AM EST to 6PM EST and Saturdays 10AM to 1PM. You can contact us via forum messaging, E-mail, and telephone. As always if you don't see it, just ask!



Thanks for looking!
Alex Goodwin
AlexG@motionlabtuning.com
MotionLabTuning.com - Engineering Performance

Motion Lab

It is Wednesday July 3rd and Motion Lab Tuning is your go to place for your bolt on 370z performance. Here are a few other great products you can contact us about.

HKS 370Z High Power cat-back: Inspired and designed from endurance and GT racing in Japan, HKS developed its Hi-Power Exhaust system for both turbocharged and naturally aspirated applications. HKS has incorporated this new race inspired offset muffler and piping design into many street applications, which offers a greater flow and higher-PRM power gains due to the less restrictive design. This is achieved by eliminating unnecessary bends for the straightest exhaust path. For turbocharged applications, the large and smooth exhaust flow allows greater exhaust velocity for better mid-range boost response and high-RPM power. Naturally aspirated vehicles also benefit from greater exhaust flow capacity as engine tuning levels increase. Certain applications are available in a Silent Hi-Power version which has an inner silencer built into the muffler. Like Drager Exhaust systems, Hi-Power Exhaust systems are made from SUS304 stainless steel muffler and tip assemblies.

Injen Air Intake - SP Series Intake System: The Injen SP Series Intake Systems Feature the Patent Pending MR Technology Process for Optimal Gains and a Safe A/F Ratio. The Injen SP Series Intake System does not limit itself to just a Cold Air System or Short Ram System. The MR Technology process has its effects on both types. The Injen SP Series Intake is The World's First Tuned Intake System. For over a decade Injen Technology Co. Ltd and our sister company has played a major roll in the design and development of air intake systems. Injen Technology is based out of California in the same city and just a few miles away from the famous Pomona Winter Nationals Top Fuel Raceway. Injen Technology's history is a classic success story of a small manufacturing company turned industry leader of aftermarket performance products.


PM, call, or E-mail for most up to date pricing! Other parts available such as Stainless steel brake lines from StopTech performance and Goodridge. High temp brake fluid available from MOTUL, ATE, and StopTech. We are open Monday - Friday 9AM EST to 6PM EST and Saturdays 10AM to 1PM. You can contact us via forum messaging, E-mail, and telephone. As always if you don't see it, just ask!



Thanks for looking!
Alex Goodwin
AlexG@motionlabtuning.com
MotionLabTuning.com - Engineering Performance

Motion Lab

It is Tuesday July 9th and Motion Lab Tuning is your go to place for your bolt on 370z performance. Here are a few other great products you can contact us about.

HKS 370Z High Power cat-back: Inspired and designed from endurance and GT racing in Japan, HKS developed its Hi-Power Exhaust system for both turbocharged and naturally aspirated applications. HKS has incorporated this new race inspired offset muffler and piping design into many street applications, which offers a greater flow and higher-PRM power gains due to the less restrictive design. This is achieved by eliminating unnecessary bends for the straightest exhaust path. For turbocharged applications, the large and smooth exhaust flow allows greater exhaust velocity for better mid-range boost response and high-RPM power. Naturally aspirated vehicles also benefit from greater exhaust flow capacity as engine tuning levels increase. Certain applications are available in a Silent Hi-Power version which has an inner silencer built into the muffler. Like Drager Exhaust systems, Hi-Power Exhaust systems are made from SUS304 stainless steel muffler and tip assemblies.

Injen Air Intake - SP Series Intake System: The Injen SP Series Intake Systems Feature the Patent Pending MR Technology Process for Optimal Gains and a Safe A/F Ratio. The Injen SP Series Intake System does not limit itself to just a Cold Air System or Short Ram System. The MR Technology process has its effects on both types. The Injen SP Series Intake is The World's First Tuned Intake System. For over a decade Injen Technology Co. Ltd and our sister company has played a major roll in the design and development of air intake systems. Injen Technology is based out of California in the same city and just a few miles away from the famous Pomona Winter Nationals Top Fuel Raceway. Injen Technology's history is a classic success story of a small manufacturing company turned industry leader of aftermarket performance products.


PM, call, or E-mail for most up to date pricing! Other parts available such as Stainless steel brake lines from StopTech performance and Goodridge. High temp brake fluid available from MOTUL, ATE, and StopTech. We are open Monday - Friday 9AM EST to 6PM EST and Saturdays 10AM to 1PM. You can contact us via forum messaging, E-mail, and telephone. As always if you don't see it, just ask!



Thanks for looking!
Alex Goodwin
AlexG@motionlabtuning.com
MotionLabTuning.com - Engineering Performance

Motion Lab

It is Wednesday July 10th and Motion Lab Tuning is your go to place for your bolt on 370z performance. Here are a few other great products you can contact us about.


Tanabe Medalian Exhaust - Medalion Touring: A refined level of performance and driveability is available in the MEDALION TOURING. The elegant, well defined appearance of MEDALION TOURING is mature, and matches the artistry of a tastefully built, highly tuned machine. Using the all new 'continuous strand' ADVANTEX packing material technology, MEDALION TOURING acheives extremely high levels of exhaust system efficiency, while maintaining a street driveable, extremely low frequency and deep tone that is well under 93db for discreet sports driving. This system requires no removeable silencer for under 93db operation at all rpms. The extremely deep, low frequency tone keeps in-cabin noise to a minimum. The full SUS304 stainless MEDALION TOURING features a slim-line oval canister, and a special dual wall, angle-cut tip. This premium quality system is for sports driving.



AEM ETI Intake System: Once again AEM is raising engineering standards with an all new series of innovative air intake systems. With a revolutionary ETI module and fully integrated design, we have eliminated the need to detune or stage an intake tube diameter as it crosses the MAF sensor. The sensor is electronically adjusted to read proper air density instead of using physical tube designs intended to “trick” the MAF reading. The result is bigger horsepower and torque gains.

Most modern fuel injected cars use a Mass Air flow (MAF) sensor to determine the air flow rate into the engine and meter fuel according to input from the sensor. The relation between the voltage output of the sensor and mass air flow is adversely affected by a shift to a larger diameter intake tube because the airspeed is reduced. This causes the MAF sensor to “under report” air flow causing a lean condition at worst and a Check Engine Light at best. To accommodate MAF sensor reporting, many intake systems reduce the diameter of the intake tube near the MAF sensor to stock or near stock size because of the need to maintain the correct air speed for the sensor to report the correct flow rate to the ECU.

AEM's ETI Intake System is an alternative design approach that allows the intake tube to maintain its diameter resulting in more air flow into the throttle body. The ETI Intake System allows AEM to tune an engine for even more power by avoiding any tube down-sizing that will reduce overall airflow and horsepower. Instead the ETI electronically communicates with the MAF sensor to ensure an accurate amount of fuel is being delivered even though the tube is larger in size than the stock system. This means the vehicle maintains the calibration as intended by the factory while enjoying the benefits of our custom designed aftermarket intake system.



PM, call, or E-mail for most up to date pricing! Other parts available such as Stainless steel brake lines from StopTech performance and Goodridge. High temp brake fluid available from MOTUL, ATE, and StopTech. We are open Monday - Friday 9AM EST to 6PM EST and Saturdays 10AM to 1PM. You can contact us via forum messaging, E-mail, and telephone. As always if you don't see it, just ask!



Thanks for looking!
Alex Goodwin
AlexG@motionlabtuning.com
MotionLabTuning.com - Engineering Performance

Motion Lab

It is Thursday July 11th and Motion Lab Tuning is your go to place for your bolt on 370z performance. Here are a few other great products you can contact us about.


Tanabe Medalian Exhaust - Medalion Touring: A refined level of performance and driveability is available in the MEDALION TOURING. The elegant, well defined appearance of MEDALION TOURING is mature, and matches the artistry of a tastefully built, highly tuned machine. Using the all new 'continuous strand' ADVANTEX packing material technology, MEDALION TOURING acheives extremely high levels of exhaust system efficiency, while maintaining a street driveable, extremely low frequency and deep tone that is well under 93db for discreet sports driving. This system requires no removeable silencer for under 93db operation at all rpms. The extremely deep, low frequency tone keeps in-cabin noise to a minimum. The full SUS304 stainless MEDALION TOURING features a slim-line oval canister, and a special dual wall, angle-cut tip. This premium quality system is for sports driving.



AEM ETI Intake System: Once again AEM is raising engineering standards with an all new series of innovative air intake systems. With a revolutionary ETI module and fully integrated design, we have eliminated the need to detune or stage an intake tube diameter as it crosses the MAF sensor. The sensor is electronically adjusted to read proper air density instead of using physical tube designs intended to “trick” the MAF reading. The result is bigger horsepower and torque gains.

Most modern fuel injected cars use a Mass Air flow (MAF) sensor to determine the air flow rate into the engine and meter fuel according to input from the sensor. The relation between the voltage output of the sensor and mass air flow is adversely affected by a shift to a larger diameter intake tube because the airspeed is reduced. This causes the MAF sensor to “under report” air flow causing a lean condition at worst and a Check Engine Light at best. To accommodate MAF sensor reporting, many intake systems reduce the diameter of the intake tube near the MAF sensor to stock or near stock size because of the need to maintain the correct air speed for the sensor to report the correct flow rate to the ECU.

AEM's ETI Intake System is an alternative design approach that allows the intake tube to maintain its diameter resulting in more air flow into the throttle body. The ETI Intake System allows AEM to tune an engine for even more power by avoiding any tube down-sizing that will reduce overall airflow and horsepower. Instead the ETI electronically communicates with the MAF sensor to ensure an accurate amount of fuel is being delivered even though the tube is larger in size than the stock system. This means the vehicle maintains the calibration as intended by the factory while enjoying the benefits of our custom designed aftermarket intake system.



PM, call, or E-mail for most up to date pricing! Other parts available such as Stainless steel brake lines from StopTech performance and Goodridge. High temp brake fluid available from MOTUL, ATE, and StopTech. We are open Monday - Friday 9AM EST to 6PM EST and Saturdays 10AM to 1PM. You can contact us via forum messaging, E-mail, and telephone. As always if you don't see it, just ask!



Thanks for looking!
Alex Goodwin
AlexG@motionlabtuning.com
MotionLabTuning.com - Engineering Performance

Motion Lab

It is Friday July 12th and Motion Lab Tuning is your go to place for your bolt on 370z performance. Here are a few other great products you can contact us about.


Tanabe Medalian Exhaust - Medalion Touring: A refined level of performance and driveability is available in the MEDALION TOURING. The elegant, well defined appearance of MEDALION TOURING is mature, and matches the artistry of a tastefully built, highly tuned machine. Using the all new 'continuous strand' ADVANTEX packing material technology, MEDALION TOURING acheives extremely high levels of exhaust system efficiency, while maintaining a street driveable, extremely low frequency and deep tone that is well under 93db for discreet sports driving. This system requires no removeable silencer for under 93db operation at all rpms. The extremely deep, low frequency tone keeps in-cabin noise to a minimum. The full SUS304 stainless MEDALION TOURING features a slim-line oval canister, and a special dual wall, angle-cut tip. This premium quality system is for sports driving.



AEM ETI Intake System: Once again AEM is raising engineering standards with an all new series of innovative air intake systems. With a revolutionary ETI module and fully integrated design, we have eliminated the need to detune or stage an intake tube diameter as it crosses the MAF sensor. The sensor is electronically adjusted to read proper air density instead of using physical tube designs intended to “trick” the MAF reading. The result is bigger horsepower and torque gains.

Most modern fuel injected cars use a Mass Air flow (MAF) sensor to determine the air flow rate into the engine and meter fuel according to input from the sensor. The relation between the voltage output of the sensor and mass air flow is adversely affected by a shift to a larger diameter intake tube because the airspeed is reduced. This causes the MAF sensor to “under report” air flow causing a lean condition at worst and a Check Engine Light at best. To accommodate MAF sensor reporting, many intake systems reduce the diameter of the intake tube near the MAF sensor to stock or near stock size because of the need to maintain the correct air speed for the sensor to report the correct flow rate to the ECU.

AEM's ETI Intake System is an alternative design approach that allows the intake tube to maintain its diameter resulting in more air flow into the throttle body. The ETI Intake System allows AEM to tune an engine for even more power by avoiding any tube down-sizing that will reduce overall airflow and horsepower. Instead the ETI electronically communicates with the MAF sensor to ensure an accurate amount of fuel is being delivered even though the tube is larger in size than the stock system. This means the vehicle maintains the calibration as intended by the factory while enjoying the benefits of our custom designed aftermarket intake system.



PM, call, or E-mail for most up to date pricing! Other parts available such as Stainless steel brake lines from StopTech performance and Goodridge. High temp brake fluid available from MOTUL, ATE, and StopTech. We are open Monday - Friday 9AM EST to 6PM EST and Saturdays 10AM to 1PM. You can contact us via forum messaging, E-mail, and telephone. As always if you don't see it, just ask!



Thanks for looking!
Alex Goodwin
AlexG@motionlabtuning.com
MotionLabTuning.com - Engineering Performance

Motion Lab

It is Monday July 15th and Motion Lab Tuning is your go to place for your bolt on 370z performance. Here are a few other great products you can contact us about.


Berk Technologies 370Z/G37 High Flow Catalytic Converters: Metallic substrate spun catalytic converters, OBDII & 49 state compliant. Full stainless steel construction. Metallic substrate offers higher flow and lighter weight. Uses advanced spiral wound ultra thin foil. Includes our custom made soft crush graphite collector gaskets for a leak free seal. These are made specifically for the new HR motor by BERK. Made with pride in the USA. Fits VQ35HR & VQ37HR Motors:

• 2009-up 370Z
• 2007-2008 350Z
• 2008-up G37 Coupe
• 2007-up G35 Sedan

M7 T-Titan Catback: The M7 brand was conceived with one simple objective – to create the ultimate in high quality performance enhancing automotive products. All M7 products are researched, developed and manufactured in Japan using the latest technology and then distributed worldwide for rigorous testing under various conditions. M7 products are also tested by M7 Co. Ltd, Japan's factory racing operations and Team M7's professional racing drivers to deliver the ultimate automotive products available. Some of the highlights of this high end exhaust are:

• 60mm exhaust, 76mm collector on the y pipe.
• Full catback exhaust, 304 high grade stainless steel pipes. High quality resonators, mufflers and ADJUSTABLE tips.
• ALL HANDCRAFTED IN JAPAN. true JDM products

PM, call, or E-mail for most up to date pricing! Other parts available such as Stainless steel brake lines from StopTech performance and Goodridge. High temp brake fluid available from MOTUL, ATE, and StopTech. We are open Monday - Friday 9AM EST to 6PM EST and Saturdays 10AM to 1PM. You can contact us via forum messaging, E-mail, and telephone. As always if you don't see it, just ask!



Thanks for looking!
Alex Goodwin
AlexG@motionlabtuning.com
MotionLabTuning.com - Engineering Performance

Motion Lab

It is Tuesday July 16th and Motion Lab Tuning is your go to place for your bolt on 370z performance. Here are a few other great products you can contact us about.


Berk Technologies 370Z/G37 High Flow Catalytic Converters: Metallic substrate spun catalytic converters, OBDII & 49 state compliant. Full stainless steel construction. Metallic substrate offers higher flow and lighter weight. Uses advanced spiral wound ultra thin foil. Includes our custom made soft crush graphite collector gaskets for a leak free seal. These are made specifically for the new HR motor by BERK. Made with pride in the USA. Fits VQ35HR & VQ37HR Motors:

• 2009-up 370Z
• 2007-2008 350Z
• 2008-up G37 Coupe
• 2007-up G35 Sedan

M7 T-Titan Catback: The M7 brand was conceived with one simple objective – to create the ultimate in high quality performance enhancing automotive products. All M7 products are researched, developed and manufactured in Japan using the latest technology and then distributed worldwide for rigorous testing under various conditions. M7 products are also tested by M7 Co. Ltd, Japan's factory racing operations and Team M7's professional racing drivers to deliver the ultimate automotive products available. Some of the highlights of this high end exhaust are:

• 60mm exhaust, 76mm collector on the y pipe.
• Full catback exhaust, 304 high grade stainless steel pipes. High quality resonators, mufflers and ADJUSTABLE tips.
• ALL HANDCRAFTED IN JAPAN. true JDM products

PM, call, or E-mail for most up to date pricing! Other parts available such as Stainless steel brake lines from StopTech performance and Goodridge. High temp brake fluid available from MOTUL, ATE, and StopTech. We are open Monday - Friday 9AM EST to 6PM EST and Saturdays 10AM to 1PM. You can contact us via forum messaging, E-mail, and telephone. As always if you don't see it, just ask!



Thanks for looking!
Alex Goodwin
AlexG@motionlabtuning.com
MotionLabTuning.com - Engineering Performance

Motion Lab

It is Wednesday July 17th and Motion Lab Tuning is your go to place for your bolt on 370z performance. Here are a few other great products you can contact us about.


Berk Technologies 370Z/G37 High Flow Catalytic Converters: Metallic substrate spun catalytic converters, OBDII & 49 state compliant. Full stainless steel construction. Metallic substrate offers higher flow and lighter weight. Uses advanced spiral wound ultra thin foil. Includes our custom made soft crush graphite collector gaskets for a leak free seal. These are made specifically for the new HR motor by BERK. Made with pride in the USA. Fits VQ35HR & VQ37HR Motors:

• 2009-up 370Z
• 2007-2008 350Z
• 2008-up G37 Coupe
• 2007-up G35 Sedan

M7 T-Titan Catback: The M7 brand was conceived with one simple objective – to create the ultimate in high quality performance enhancing automotive products. All M7 products are researched, developed and manufactured in Japan using the latest technology and then distributed worldwide for rigorous testing under various conditions. M7 products are also tested by M7 Co. Ltd, Japan's factory racing operations and Team M7's professional racing drivers to deliver the ultimate automotive products available. Some of the highlights of this high end exhaust are:

• 60mm exhaust, 76mm collector on the y pipe.
• Full catback exhaust, 304 high grade stainless steel pipes. High quality resonators, mufflers and ADJUSTABLE tips.
• ALL HANDCRAFTED IN JAPAN. true JDM products

PM, call, or E-mail for most up to date pricing! Other parts available such as Stainless steel brake lines from StopTech performance and Goodridge. High temp brake fluid available from MOTUL, ATE, and StopTech. We are open Monday - Friday 9AM EST to 6PM EST and Saturdays 10AM to 1PM. You can contact us via forum messaging, E-mail, and telephone. As always if you don't see it, just ask!



Thanks for looking!
Alex Goodwin
AlexG@motionlabtuning.com
MotionLabTuning.com - Engineering Performance

Motion Lab

It is Thursday July 18th and Motion Lab Tuning is your go to place for your bolt on 370z performance. Here are a few other great products you can contact us about.


Berk Technologies 370Z/G37 High Flow Catalytic Converters: Metallic substrate spun catalytic converters, OBDII & 49 state compliant. Full stainless steel construction. Metallic substrate offers higher flow and lighter weight. Uses advanced spiral wound ultra thin foil. Includes our custom made soft crush graphite collector gaskets for a leak free seal. These are made specifically for the new HR motor by BERK. Made with pride in the USA. Fits VQ35HR & VQ37HR Motors:

• 2009-up 370Z
• 2007-2008 350Z
• 2008-up G37 Coupe
• 2007-up G35 Sedan

M7 T-Titan Catback: The M7 brand was conceived with one simple objective – to create the ultimate in high quality performance enhancing automotive products. All M7 products are researched, developed and manufactured in Japan using the latest technology and then distributed worldwide for rigorous testing under various conditions. M7 products are also tested by M7 Co. Ltd, Japan's factory racing operations and Team M7's professional racing drivers to deliver the ultimate automotive products available. Some of the highlights of this high end exhaust are:

• 60mm exhaust, 76mm collector on the y pipe.
• Full catback exhaust, 304 high grade stainless steel pipes. High quality resonators, mufflers and ADJUSTABLE tips.
• ALL HANDCRAFTED IN JAPAN. true JDM products

PM, call, or E-mail for most up to date pricing! Other parts available such as Stainless steel brake lines from StopTech performance and Goodridge. High temp brake fluid available from MOTUL, ATE, and StopTech. We are open Monday - Friday 9AM EST to 6PM EST and Saturdays 10AM to 1PM. You can contact us via forum messaging, E-mail, and telephone. As always if you don't see it, just ask!



Thanks for looking!
Alex Goodwin
AlexG@motionlabtuning.com
MotionLabTuning.com - Engineering Performance

Motion Lab

It is Monday July 22nd and Motion Lab Tuning is your go to place for your bolt on 370z performance. Here are a few other great products you can contact us about.


Berk Technologies 370Z/G37 High Flow Catalytic Converters: Metallic substrate spun catalytic converters, OBDII & 49 state compliant. Full stainless steel construction. Metallic substrate offers higher flow and lighter weight. Uses advanced spiral wound ultra thin foil. Includes our custom made soft crush graphite collector gaskets for a leak free seal. These are made specifically for the new HR motor by BERK. Made with pride in the USA. Fits VQ35HR & VQ37HR Motors:

• 2009-up 370Z
• 2007-2008 350Z
• 2008-up G37 Coupe
• 2007-up G35 Sedan

M7 T-Titan Catback: The M7 brand was conceived with one simple objective – to create the ultimate in high quality performance enhancing automotive products. All M7 products are researched, developed and manufactured in Japan using the latest technology and then distributed worldwide for rigorous testing under various conditions. M7 products are also tested by M7 Co. Ltd, Japan's factory racing operations and Team M7's professional racing drivers to deliver the ultimate automotive products available. Some of the highlights of this high end exhaust are:

• 60mm exhaust, 76mm collector on the y pipe.
• Full catback exhaust, 304 high grade stainless steel pipes. High quality resonators, mufflers and ADJUSTABLE tips.
• ALL HANDCRAFTED IN JAPAN. true JDM products

PM, call, or E-mail for most up to date pricing! Other parts available such as Stainless steel brake lines from StopTech performance and Goodridge. High temp brake fluid available from MOTUL, ATE, and StopTech. We are open Monday - Friday 9AM EST to 6PM EST and Saturdays 10AM to 1PM. You can contact us via forum messaging, E-mail, and telephone. As always if you don't see it, just ask!



Thanks for looking!
Alex Goodwin
AlexG@motionlabtuning.com
MotionLabTuning.com - Engineering Performance