NEW from AMPLIFIED:TAKEDA/AFE SHORT RAM INTAKE for NISSAN 370z

kdo2milger · 07-30-2009, 05:04 PM

Quote:

Originally Posted by LOU@AMPLIFIED

I have 4 in stock. I just got authorized to do super low price. PM me if interested.

ill take a pm

LOU@AMPLIFIED · 07-30-2009, 07:05 PM

All Price request PM'D

kdo2milger · 07-30-2009, 10:57 PM

Quote:

Originally Posted by lou@amplified

all price request pm'd

!sold!

LOU@AMPLIFIED · 07-30-2009, 11:17 PM

thank you for the order. 3 left

for the price, these should go quick

theDreamer · 07-31-2009, 09:48 AM

Another one gone, thanks for the deal.

import111 · 07-31-2009, 10:18 AM

I would like to know what this system does to our a/f ratio?

Dee@Amplified · 08-01-2009, 03:28 AM

Quote:

Originally Posted by import111

I would like to know what this system does to our a/f ratio?

There is a sensor plug on the intake, and basically the ECU will automatically compensate for the change in the air fuel ratio by adding more fuel for the increase in air. Thanks for the PM's guys keep them coming! All PM's replied.

TBSS2008 · 08-01-2009, 02:14 PM

Install:
Cons:
Stickers on Intakes: The stickers on the intake did not want to stay on when heated up, so I took them off with a little goo gone. (Not a real issue for me because I’m not much a of badge guy, I like the stealth look).
Also the sticker that goes on the heat shield did not stick either, again not a big deal for me.
Pros:
Sound: The sound coming out of the engine now is just intoxicating, can't keep my foot out of the gas now. At WOT the engine has a very nice throaty growl.
Performance: I have had them on for 5 days now and I drive my car daily so the power has definitely gotten better. I have not dyno tested the intake but the car is more responsive and seems to pull harder.
Looks: The chrome piping is very nice, quality is great and I love the AFE pro dry filters. No oil no mess and they flow just as good as the oil style filters.

Here are some pics of the Takeda Intake Installed:

LOU@AMPLIFIED · 08-01-2009, 03:44 PM

thank you for the pictures ^^^. I really like mine on my G37.

TAKEDA explained as to why they decided to make a small sheild instead of the full heat shield.

The heat generated by the radiator hose next to the intake on the passenger side was where the heat soak was coming from when they were testing and doing dyno runs. Only the passenger side was getting heat soak so they decided to make a small shield to minimize the heat and sure enough, after that cover they saw better gains while doing the dyno

I also did some of my own testing. I have the magden computer on my car and i was testing the AIR INTAKE TEMPS while driving to san diego. The air intake was typically 20 deg hotter than outside temp just like the stock air box on cruising speed. Once i stepped on the throttle, the air intake dropped 10 deg within seconds.

Here's some pictures of the TAKEDA installed on my G

kdo2milger · 08-01-2009, 09:25 PM

Quote:

Originally Posted by TBSS2008

Install:
Cons:
Stickers on Intakes: The stickers on the intake did not want to stay on when heated up, so I took them off with a little goo gone. (Not a real issue for me because I’m not much a of badge guy, I like the stealth look).
Also the sticker that goes on the heat shield did not stick either, again not a big deal for me.
Pros:
Sound: The sound coming out of the engine now is just intoxicating, can't keep my foot out of the gas now. At WOT the engine has a very nice throaty growl.
Performance: I have had them on for 5 days now and I drive my car daily so the power has definitely gotten better. I have not dyno tested the intake but the car is more responsive and seems to pull harder.
Looks: The chrome piping is very nice, quality is great and I love the AFE pro dry filters. No oil no mess and they flow just as good as the oil style filters.

Here are some pics of the Takeda Intake Installed:

ahh yah!!! cant wait to get mine...hopefully early next week...

looks good and thats a clean z you got there, black is just awesome when its cleaned up

kdo2milger · 08-01-2009, 09:27 PM

Quote:

Originally Posted by LOU@AMPLIFIED

thank you for the pictures ^^^. I really like mine on my G37.

TAKEDA explained as to why they decided to make a small sheild instead of the full heat shield.

The heat generated by the radiator hose next to the intake on the passenger side was where the heat soak was coming from when they were testing and doing dyno runs. Only the passenger side was getting heat soak so they decided to make a small shield to minimize the heat and sure enough, after that cover they saw better gains while doing the dyno

I also did some of my own testing. I have the magden computer on my car and i was testing the AIR INTAKE TEMPS while driving to san diego. The air intake was typically 20 deg hotter than outside temp just like the stock air box on cruising speed. Once i stepped on the throttle, the air intake dropped 10 deg within seconds.

Here's some pictures of the TAKEDA installed on my G

sorry all i see is fluffed pillows...zzzzzzzzzzzzzzzz...zzzzzzzzzzzzzz....zzz zzzzzzzz

frost · 08-01-2009, 09:30 PM

I didn't see a car in the first pic.

TBSS2008 · 08-02-2009, 09:56 AM

Thanks your definetly going to love the intake. Just a heads up when I disconnected my battery and reconnected it the automatic roll down feature on the windows got disabled. If your windows dont roll up automatically when you shut your door after reconnecting the battery perform the following steps (I almost took my car in thinking I blew a senors or something).

If the windows do not close automatically
If the power window automatic function (closing
only) does not operate properly, perform the
following procedure to initialize the power
window system.
1. Push the ignition switch to the ON position.
2. Close the door.
3. Open the window completely by operating
the power window switch.
4. Pull the power window switch and hold it to
close the window, and then hold the switch
more than 3 seconds after the window is
closed completely.
5. Release the power window switch. Operate
the window by the automatic function to
confirm the initialization is complete.
6. Perform steps 2 through 5 above for other
windows.

kdo2milger · 08-02-2009, 11:28 AM

Quote:

Originally Posted by TBSS2008

Thanks your definetly going to love the intake. Just a heads up when I disconnected my battery and reconnected it the automatic roll down feature on the windows got disabled. If your windows dont roll up automatically when you shut your door after reconnecting the battery perform the following steps (I almost took my car in thinking I blew a senors or something).

If the windows do not close automatically
If the power window automatic function (closing
only) does not operate properly, perform the
following procedure to initialize the power
window system.
1. Push the ignition switch to the ON position.
2. Close the door.
3. Open the window completely by operating
the power window switch.
4. Pull the power window switch and hold it to
close the window, and then hold the switch
more than 3 seconds after the window is
closed completely.
5. Release the power window switch. Operate
the window by the automatic function to
confirm the initialization is complete.
6. Perform steps 2 through 5 above for other
windows.

thats odd, i thought it was a factory default setting...i'll do the same then, thanks

LOU@AMPLIFIED · 08-03-2009, 03:41 AM

thank you for the orders

2 left an very cheap price

07-31-2009, 09:48 AM	#35 (permalink)
theDreamer A True Z Fanatic Join Date: Feb 2009 Location: Texas Posts: 30,879 Drives: 370z Rep Power: 4210	Another one gone, thanks for the deal. __________________ theDreamer's Z // Fast Intentions // Uprev // GTM // HKS // TEIN theDreamer's Silvia // URAS // GREDDY Houston Zs // Facebook // Twitter // Instagram

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
BREMBO 6 POT FRONT CALIPERS for NISSAN 370z now available at AMPLIFIED	LOU@AMPLIFIED	Brakes & Suspension	54	04-07-2016 11:22 PM
EIBACH PRO KIT for NISSAN 370Z, taking pre-orders from AMPLIFIED MOTORSPORT	LOU@AMPLIFIED	Suspension/Brakes	20	04-07-2010 09:41 PM
INVIDIA EXHAUST Q300 , for NISSAN 370Z available soon at AMPLIFIED MOTORSPORT	LOU@AMPLIFIED	Exhaust/Intake	20	07-08-2009 01:13 AM
Hks super hybrid filters for nissan 370z now available at amplified motorsport	LOU@AMPLIFIED	Exhaust/Intake	2	04-07-2009 05:22 AM

07-30-2009, 07:05 PM	#32 (permalink)
LOU@AMPLIFIED Vendorship temporary revoked due to payment issue Join Date: Nov 2008 Location: so cal Posts: 982 Drives: 08 g37/09 370z Rep Power: 0	All Price request PM'D

07-30-2009, 11:17 PM	#34 (permalink)
LOU@AMPLIFIED Vendorship temporary revoked due to payment issue Join Date: Nov 2008 Location: so cal Posts: 982 Drives: 08 g37/09 370z Rep Power: 0	thank you for the order. 3 left for the price, these should go quick

07-31-2009, 10:18 AM	#36 (permalink)
import111 Track Member Join Date: Feb 2009 Location: Tucson, AZ. Posts: 622 Drives: 09 Nissan 370Z Rep Power: 191	I would like to know what this system does to our a/f ratio?

08-01-2009, 03:44 PM	#39 (permalink)
LOU@AMPLIFIED Vendorship temporary revoked due to payment issue Join Date: Nov 2008 Location: so cal Posts: 982 Drives: 08 g37/09 370z Rep Power: 0	thank you for the pictures ^^^. I really like mine on my G37. TAKEDA explained as to why they decided to make a small sheild instead of the full heat shield. The heat generated by the radiator hose next to the intake on the passenger side was where the heat soak was coming from when they were testing and doing dyno runs. Only the passenger side was getting heat soak so they decided to make a small shield to minimize the heat and sure enough, after that cover they saw better gains while doing the dyno I also did some of my own testing. I have the magden computer on my car and i was testing the AIR INTAKE TEMPS while driving to san diego. The air intake was typically 20 deg hotter than outside temp just like the stock air box on cruising speed. Once i stepped on the throttle, the air intake dropped 10 deg within seconds. Here's some pictures of the TAKEDA installed on my G

08-01-2009, 09:30 PM	#42 (permalink)
frost Retired admin Join Date: Dec 2008 Location: Winterfell Posts: 106,613 Drives: Your Wife Crazy Rep Power: 0	I didn't see a car in the first pic.

08-02-2009, 09:56 AM	#43 (permalink)
TBSS2008 Base Member Join Date: Apr 2009 Location: Texas Posts: 195 Drives: 11 Corvette GS 6spd Rep Power: 16	Thanks your definetly going to love the intake. Just a heads up when I disconnected my battery and reconnected it the automatic roll down feature on the windows got disabled. If your windows dont roll up automatically when you shut your door after reconnecting the battery perform the following steps (I almost took my car in thinking I blew a senors or something). If the windows do not close automatically If the power window automatic function (closing only) does not operate properly, perform the following procedure to initialize the power window system. 1. Push the ignition switch to the ON position. 2. Close the door. 3. Open the window completely by operating the power window switch. 4. Pull the power window switch and hold it to close the window, and then hold the switch more than 3 seconds after the window is closed completely. 5. Release the power window switch. Operate the window by the automatic function to confirm the initialization is complete. 6. Perform steps 2 through 5 above for other windows.

08-03-2009, 03:41 AM	#45 (permalink)
LOU@AMPLIFIED Vendorship temporary revoked due to payment issue Join Date: Nov 2008 Location: so cal Posts: 982 Drives: 08 g37/09 370z Rep Power: 0	thank you for the orders 2 left an very cheap price