Future Release : ARK PERFORMANCE INC HFC & GRIP TYPE 2 v2

pf62 · 01-20-2012, 10:03 PM

Team ARK, what is the status of your new hfc

marrim · 01-21-2012, 02:27 AM

Old exhaust, old cats all removed. Did not break a single bolt.
I will be installing the new HFC and new ARK exhaust in the morning.

Suggestion on removing bolts. Alot of the forum users use PB Blaster and still break bolts. I use a different product that I got from my companies metal shop. It's called Aero Kroil.
It can be bought a few places including amazon. I think it works better on old bolts. I think penetrates metals better than PB Blaster.

Amazon Link

Aero Kroil Info Website

I, in no way am trying to sell anything. Just one of the best products for tough bolts I have found and sharing the love to the forum.

Here are a few pics of what the can looks like.

marrim · 01-27-2012, 11:57 AM

Quote:

Originally Posted by MoChu

Just got mine installed. The tip on the passenger side sticks out more than the one on the driver side. Anyone else have this problem?

Yes my passanger side is about 1/8th to 2/8ths longer.

marrim · 01-27-2012, 11:59 AM

Quote:

Originally Posted by maro

the roads here in AZ are pretty bad,, like to know how it work!! let me know plz

I also in AZ and have not scrapped at all. I am runing stock height. I did not measure before or after but it looks like its the same.

TeamARK · 01-27-2012, 12:55 PM

Start from the back. Loosen the rear mufflers and have a friend hold it at the desired place and bolt it down.

There are 3 places where you should look to align our mufflers.
Tips
Dual Chamber necks
Flanges that connect to the mid pipes

marrim · 01-27-2012, 02:10 PM

Quote:

Originally Posted by TeamARK

Start from the back. Loosen the rear mufflers and have a friend hold it at the desired place and bolt it down.

There are 3 places where you should look to align our mufflers.
Tips
Dual Chamber necks
Flanges that connect to the mid pipes

Thats the plan this weekend. I had it all aligned on day one but I have a feeling that the bolts have loosened up over the first few runs. Car goes back on the lift this weekend to tighten any loose bolts and realign if needed.

ccdominic · 01-30-2012, 02:18 PM

where are the reviews for the 2v2 guys?

sixpax · 01-30-2012, 03:54 PM

I ordered one and installed it over the weekend. Pictures upcoming in my journal thread. Anyway I think I got an older version as I do not see anyway in a million years I will ever get the cans lined up properly, one currently sits lower than the other and the "ARK" logos are way off. I ordered a version 2 because I thought it overcame those things. Is it possible I got an older version instead of a V2 ?

ccdominic · 01-30-2012, 03:55 PM

who did you order from? if they gave you the wrong exhaust i don't see why you wouldn't be infuriated lol.

TeamARK · 01-30-2012, 04:43 PM

When did you order this?

sixpax · 01-30-2012, 05:21 PM

Quote:

Originally Posted by TeamARK

When did you order this?

Last week from FBNissan but it shipped to me directly from you

Can you tell by looking at it if it's an old one, or do I just need to spend more time trying to adjust it ? By the time we got to the adjusting part we had been working on the thing all day long and I was cold and tired. It took forever to get the stock cats out and put Berk HFCs on, and had done a Typhoon first on top of that so it was a long day.

I LOVE the sound of the thing with the Berk...and the burnt tips are awesome. Just wish the damn thing lined up better.

marrim · 01-30-2012, 06:46 PM

Look at the flanges. There is a date stamp on them. It will tell you when it was built. Mine was 12/2011. So I would think that is a v2t2. If your trying to line it up by yourself you will never get it lined up. You need 2 people to this job. I also bought through FBNissan and was told it was directly shipped from ARK. I did not have issuses with mine when i got a second set of hands, but I was having tons of issuses when I was trying to do it by myself.

marrim · 01-30-2012, 06:55 PM

Quote:

Originally Posted by sixpax

I ordered one and installed it over the weekend. Pictures upcoming in my journal thread. Anyway I think I got an older version as I do not see anyway in a million years I will ever get the cans lined up properly, one currently sits lower than the other and the "ARK" logos are way off. I ordered a version 2 because I thought it overcame those things. Is it possible I got an older version instead of a V2 ?

Looking at your pic the drivers side is low and twisted. If you correct that the logos should line up. The flanges of each 2 pieces should be flush all the way around before tightening the bolts. Start from back to front.

sixpax · 01-30-2012, 07:15 PM

Quote:

Originally Posted by marrim

Looking at your pic the drivers side is low and twisted. If you correct that the logos should line up. The flanges of each 2 pieces should be flush all the way around before tightening the bolts. Start from back to front.

Thanks for the input. I remember looking at the date but I don't remember what the date was. I am pretty confident it is a new one and I have just done a crappy job of lining them up so will mess with it this weekend.

UPDATE: In fairness to ARK, I should post an after adjusting photo. Looks way better than it did ! I love the exhaust. Other photos also added in my journal thread.

engmontano11 · 01-30-2012, 07:29 PM

So whats the status on the HFC's???? price?, does it cause a check engine light? how much does the rasp reduce? how much performance do we gain???

01-21-2012, 02:27 AM	#62 (permalink)
marrim Base Member Join Date: Aug 2010 Location: AZ Posts: 183 Drives: 2011 370z White Man Rep Power: 15	Old exhaust, old cats all removed. Did not break a single bolt. I will be installing the new HFC and new ARK exhaust in the morning. Suggestion on removing bolts. Alot of the forum users use PB Blaster and still break bolts. I use a different product that I got from my companies metal shop. It's called Aero Kroil. It can be bought a few places including amazon. I think it works better on old bolts. I think penetrates metals better than PB Blaster. Amazon Link Aero Kroil Info Website I, in no way am trying to sell anything. Just one of the best products for tough bolts I have found and sharing the love to the forum. Here are a few pics of what the can looks like. Last edited by marrim; 01-21-2012 at 02:34 AM.

01-30-2012, 06:46 PM	#72 (permalink)
marrim Base Member Join Date: Aug 2010 Location: AZ Posts: 183 Drives: 2011 370z White Man Rep Power: 15	Look at the flanges. There is a date stamp on them. It will tell you when it was built. Mine was 12/2011. So I would think that is a v2t2. If your trying to line it up by yourself you will never get it lined up. You need 2 people to this job. I also bought through FBNissan and was told it was directly shipped from ARK. I did not have issuses with mine when i got a second set of hands, but I was having tons of issuses when I was trying to do it by myself. Last edited by marrim; 01-30-2012 at 06:56 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
ARK Grip Type 2 - Review + Pics	detroadster	Intake/Exhaust	34	07-30-2013 04:03 AM
[FOR SALE] ARK Grip Type 2 CBE FS - South Jersey	TonyBPD	Parts for sale (Private Classifieds)	78	11-16-2011 09:06 PM
Just received the new Ark Type 2 Grip True Dual exhaust	Zeto	Intake/Exhaust	74	09-03-2011 04:10 AM
Some More updates on the Type 2 ARK GRIP Exhaust	TeamARK	Intake/Exhaust	3	08-23-2011 12:24 PM
FS: Ark Grip Type 2 Exhaust - NEW	Raven	Parts for sale (Private Classifieds)	26	02-07-2011 11:57 AM

01-20-2012, 10:03 PM	#61 (permalink)
pf62 Base Member Join Date: Aug 2011 Location: Allentown,PA Posts: 42 Drives: 2010 370z 7at blk ch Rep Power: 14	Team ARK, what is the status of your new hfc

01-27-2012, 12:55 PM	#65 (permalink)
TeamARK Track Member Join Date: Jul 2009 Location: CHINO Posts: 957 Drives: Black 350z/370z Rep Power: 17	Start from the back. Loosen the rear mufflers and have a friend hold it at the desired place and bolt it down. There are 3 places where you should look to align our mufflers. Tips Dual Chamber necks Flanges that connect to the mid pipes

01-30-2012, 02:18 PM	#67 (permalink)
ccdominic Track Member Join Date: Jul 2011 Location: Corpus Christi, TX Posts: 615 Drives: Built LS1/T56 RX7 FD Rep Power: 15	where are the reviews for the 2v2 guys?

01-30-2012, 03:55 PM	#69 (permalink)
ccdominic Track Member Join Date: Jul 2011 Location: Corpus Christi, TX Posts: 615 Drives: Built LS1/T56 RX7 FD Rep Power: 15	who did you order from? if they gave you the wrong exhaust i don't see why you wouldn't be infuriated lol.

01-30-2012, 04:43 PM	#70 (permalink)
TeamARK Track Member Join Date: Jul 2009 Location: CHINO Posts: 957 Drives: Black 350z/370z Rep Power: 17	When did you order this?

01-30-2012, 07:29 PM	#75 (permalink)
engmontano11 Base Member Join Date: Jun 2011 Location: So.Cal. Posts: 23 Drives: 2011 370Z Nismo Rep Power: 14	So whats the status on the HFC's???? price?, does it cause a check engine light? how much does the rasp reduce? how much performance do we gain???