AEM Electronic Tuned Intakes Now Available! + 9.67rwhp & FREE S&H!!

AJ@ECSMotorsports · 05-06-2010, 01:24 PM

We are an authorized AEM Dealer. Buy authorized and be assured your intake includes FULL warranty and is 100% authentic AEM.

Once again AEM is raising engineering standards with an all new series of innovative air intake systems. With a revolutionary ETI module and fully integrated design, we have eliminated the need to detune or stage an intake tube diameter as it crosses the MAF sensor. The sensor is electronically adjusted to read proper air density instead of using physical tube designs intended to “trick” the MAF reading. The result is bigger horsepower and torque gains.

Available for the 09+ Nissan 370Z in Silver and Polished Powedercoat Finish

Link to Dyno Chart

Link to Installation Instructions

Product Style: AEM Cold Air Intake System
Estimated Horsepower Gain: 9.67 HP @ 7100 RPM
Replacement Filter: 21-202DOSK
Street Legal In All States: No
Weight: 14.9 lb (6.8 kg)

TECH TALK:
Most modern fuel injected cars use a Mass Air flow (MAF) sensor to determine the air flow rate into the engine and meter fuel according to input from the sensor. The relation between the voltage output of the sensor and mass air flow is adversely affected by a shift to a larger diameter intake tube because the airspeed is reduced. This causes the MAF sensor to “under report” air flow causing a lean condition at worst and a Check Engine Light at best. To accommodate MAF sensor reporting, many intake systems reduce the diameter of the intake tube near the MAF sensor to stock or near stock size because of the need to maintain the correct air speed for the sensor to report the correct flow rate to the ECU. AEM's ETI Intake System is an alternative design approach that allows the intake tube to maintain its diameter resulting in more air flow into the throttle body. The ETI Intake System allows AEM to tune an engine for even more power by avoiding any tube down-sizing that will reduce overall airflow and horsepower. Instead the ETI electronically communicates with the MAF sensor to ensure an accurate amount of fuel is being delivered even though the tube is larger in size than the stock system. This means the vehicle maintains the calibration as intended by the factory while enjoying the benefits of our custom designed aftermarket intake system.

Please PM/Post/IM/Call us for Special 370Z Member Pricing!

Thank you all for checking out these awesome new intakes!
Best regards,
AJ
ECS Motorsports

370Zsteve · 05-06-2010, 01:29 PM

Any issue with relocating the MAFS to the front of the vehicle? Is it more susceptible to the elements (rain)? How about airflow issues with the MAFS too close to the filters? Otherwise, I really like this design.

edit: Very detailed install instructions.

Jamaica · 05-08-2010, 06:19 PM

pmm pricing please

Kastley85891 · 05-08-2010, 08:55 PM

Go on then , hit me

SE · 05-08-2010, 09:09 PM

pm pricing to 95050 CA

puckshaw · 05-08-2010, 10:48 PM

Curious what the price is as well. PM me please

SE · 05-10-2010, 02:19 PM

Still waiting on a response

Juruki · 05-10-2010, 02:49 PM

shipped to 91011 plz

AJ@ECSMotorsports · 05-10-2010, 06:39 PM

All PMs sent!

Locating the MAF closer to the intakes allows the ATI module to obtain a more accurate reading, at least that is my assumption.

AEM dyno tunes and tests all their intakes and this design is indeed innovative and effective!

AJ@ECSMotorsports · 05-19-2010, 02:55 PM

Bump it up!

In stock!!

AJ@ECSMotorsports · 05-26-2010, 11:34 AM

Hump day Bump!!

PM or call us today for the BEST pricing online, GUARANTEED!
We will not be undersold!

Thank you all for your business and for choosing ECS Motorsports!

Best regards,
AJ
ECSMotorsports.com
1-888-316-3669

AJ@ECSMotorsports · 05-30-2010, 10:48 AM

Both colors in stock, ready to ship!!

AJ@ECSMotorsports · 07-13-2010, 01:58 PM

Bunch in stock!!

AJ@ECSMotorsports · 08-09-2010, 10:31 AM

We've got 6 intakes IN STOCK, ready to ship immediately!!

PM/Call for exclusive pricing or to order.

Regards,
AJ
ECS Motorsports

ClemsonWill · 08-09-2010, 10:43 AM

What is the reservoir in the middle of the picture for?

Send me pm with a price for the gray shipped to 29483.

05-06-2010, 01:24 PM	#1 (permalink)
AJ@ECSMotorsports The370Z.com Sponsor Join Date: Oct 2009 Location: Central Florida Posts: 1,290 Drives: '10 335i\| '12 GT-R Rep Power: 18	AEM Electronic Tuned Intakes Now Available! + 9.67rwhp & FREE S&H!! We are an authorized AEM Dealer. Buy authorized and be assured your intake includes FULL warranty and is 100% authentic AEM. Once again AEM is raising engineering standards with an all new series of innovative air intake systems. With a revolutionary ETI module and fully integrated design, we have eliminated the need to detune or stage an intake tube diameter as it crosses the MAF sensor. The sensor is electronically adjusted to read proper air density instead of using physical tube designs intended to “trick” the MAF reading. The result is bigger horsepower and torque gains. Available for the 09+ Nissan 370Z in Silver and Polished Powedercoat Finish Link to Dyno Chart Link to Installation Instructions Product Style: AEM Cold Air Intake System Estimated Horsepower Gain: 9.67 HP @ 7100 RPM Replacement Filter: 21-202DOSK Street Legal In All States: No Weight: 14.9 lb (6.8 kg) TECH TALK: Most modern fuel injected cars use a Mass Air flow (MAF) sensor to determine the air flow rate into the engine and meter fuel according to input from the sensor. The relation between the voltage output of the sensor and mass air flow is adversely affected by a shift to a larger diameter intake tube because the airspeed is reduced. This causes the MAF sensor to “under report” air flow causing a lean condition at worst and a Check Engine Light at best. To accommodate MAF sensor reporting, many intake systems reduce the diameter of the intake tube near the MAF sensor to stock or near stock size because of the need to maintain the correct air speed for the sensor to report the correct flow rate to the ECU. AEM's ETI Intake System is an alternative design approach that allows the intake tube to maintain its diameter resulting in more air flow into the throttle body. The ETI Intake System allows AEM to tune an engine for even more power by avoiding any tube down-sizing that will reduce overall airflow and horsepower. Instead the ETI electronically communicates with the MAF sensor to ensure an accurate amount of fuel is being delivered even though the tube is larger in size than the stock system. This means the vehicle maintains the calibration as intended by the factory while enjoying the benefits of our custom designed aftermarket intake system. Please PM/Post/IM/Call us for Special 370Z Member Pricing! Thank you all for checking out these awesome new intakes! Best regards, AJ ECS Motorsports __________________ Your 370Z/G37 Performance Specialists! PH: 1-855-ECS-PARTS \| PM me \| E-Mail Us \| AIM - ECSMotorsports \| Facebook Us!

05-06-2010, 01:29 PM	#2 (permalink)
370Zsteve A True Z Fanatic Join Date: Sep 2009 Location: Gold Coast CT Posts: 10,599 Drives: 2019 Corvette G.S. Rep Power: 43	Any issue with relocating the MAFS to the front of the vehicle? Is it more susceptible to the elements (rain)? How about airflow issues with the MAFS too close to the filters? Otherwise, I really like this design. edit: Very detailed install instructions. __________________ SOLD MY Z MARCH 2018 - another Core OG moves on - new ride 2019 Z Corvette Grand Sport - no mods necessary but already have eyes on HFC and intakes LOL IT NEVER ENDS. Last edited by 370Zsteve; 05-08-2010 at 09:17 PM.

05-08-2010, 08:55 PM	#4 (permalink)
Kastley85891 A True Z Fanatic Join Date: Nov 2009 Location: ATX 370 - Sold Posts: 1,149 Drives: 2003 Wagon Rep Power: 18	Go on then , hit me __________________ Boosted V8 hunter 2850 lbs and 375WHP

05-10-2010, 06:39 PM	#9 (permalink)
AJ@ECSMotorsports The370Z.com Sponsor Join Date: Oct 2009 Location: Central Florida Posts: 1,290 Drives: '10 335i\| '12 GT-R Rep Power: 18	All PMs sent! Locating the MAF closer to the intakes allows the ATI module to obtain a more accurate reading, at least that is my assumption. AEM dyno tunes and tests all their intakes and this design is indeed innovative and effective! __________________ Your 370Z/G37 Performance Specialists! PH: 1-855-ECS-PARTS \| PM me \| E-Mail Us \| AIM - ECSMotorsports \| Facebook Us!

05-19-2010, 02:55 PM	#10 (permalink)
AJ@ECSMotorsports The370Z.com Sponsor Join Date: Oct 2009 Location: Central Florida Posts: 1,290 Drives: '10 335i\| '12 GT-R Rep Power: 18	Bump it up! In stock!! __________________ Your 370Z/G37 Performance Specialists! PH: 1-855-ECS-PARTS \| PM me \| E-Mail Us \| AIM - ECSMotorsports \| Facebook Us!

05-08-2010, 06:19 PM	#3 (permalink)
Jamaica A True Z Fanatic Join Date: Mar 2010 Location: SoCal Posts: 15,362 Drives: Under boost Rep Power: 73	pmm pricing please

05-08-2010, 09:09 PM	#5 (permalink)
SE A True Z Fanatic Join Date: Jan 2010 Location: San Jose, CA Posts: 4,236 Drives: 370z/STI/EVO X/IS-F Rep Power: 23	pm pricing to 95050 CA

05-08-2010, 10:48 PM	#6 (permalink)
puckshaw Track Member Join Date: Nov 2009 Location: Charlotte, NC Posts: 620 Drives: 09 PW 370Z Touring Rep Power: 17	Curious what the price is as well. PM me please

05-10-2010, 02:19 PM	#7 (permalink)
SE A True Z Fanatic Join Date: Jan 2010 Location: San Jose, CA Posts: 4,236 Drives: 370z/STI/EVO X/IS-F Rep Power: 23	Still waiting on a response

05-10-2010, 02:49 PM	#8 (permalink)
Juruki Track Member Join Date: Mar 2010 Location: SoCal Posts: 965 Drives: 370Z Tour/Sport/Navi Rep Power: 16	shipped to 91011 plz

05-26-2010, 11:34 AM	#11 (permalink)
AJ@ECSMotorsports The370Z.com Sponsor Join Date: Oct 2009 Location: Central Florida Posts: 1,290 Drives: '10 335i\| '12 GT-R Rep Power: 18	Hump day Bump!! PM or call us today for the BEST pricing online, GUARANTEED! We will not be undersold! Thank you all for your business and for choosing ECS Motorsports! Best regards, AJ ECSMotorsports.com 1-888-316-3669 __________________ Your 370Z/G37 Performance Specialists! PH: 1-855-ECS-PARTS \| PM me \| E-Mail Us \| AIM - ECSMotorsports \| Facebook Us!

05-30-2010, 10:48 AM	#12 (permalink)
AJ@ECSMotorsports The370Z.com Sponsor Join Date: Oct 2009 Location: Central Florida Posts: 1,290 Drives: '10 335i\| '12 GT-R Rep Power: 18	Both colors in stock, ready to ship!! __________________ Your 370Z/G37 Performance Specialists! PH: 1-855-ECS-PARTS \| PM me \| E-Mail Us \| AIM - ECSMotorsports \| Facebook Us!

07-13-2010, 01:58 PM	#13 (permalink)
AJ@ECSMotorsports The370Z.com Sponsor Join Date: Oct 2009 Location: Central Florida Posts: 1,290 Drives: '10 335i\| '12 GT-R Rep Power: 18	Bunch in stock!! __________________ Your 370Z/G37 Performance Specialists! PH: 1-855-ECS-PARTS \| PM me \| E-Mail Us \| AIM - ECSMotorsports \| Facebook Us!

08-09-2010, 10:31 AM	#14 (permalink)
AJ@ECSMotorsports The370Z.com Sponsor Join Date: Oct 2009 Location: Central Florida Posts: 1,290 Drives: '10 335i\| '12 GT-R Rep Power: 18	We've got 6 intakes IN STOCK, ready to ship immediately!! PM/Call for exclusive pricing or to order. Regards, AJ ECS Motorsports __________________ Your 370Z/G37 Performance Specialists! PH: 1-855-ECS-PARTS \| PM me \| E-Mail Us \| AIM - ECSMotorsports \| Facebook Us!

08-09-2010, 10:43 AM	#15 (permalink)
ClemsonWill A True Z Fanatic Join Date: Jul 2010 Location: Charleston, SC Posts: 12,045 Drives: a Civic VP! Rep Power: 445	What is the reservoir in the middle of the picture for? Send me pm with a price for the gray shipped to 29483.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Takeda Polished Twin Air Intakes \| FREE S&H \| IN-STOCK	AJ@ECSMotorsports	Exhaust/Intake	61	03-10-2014 12:35 PM
Stillen Gen III Ultra Long Tube Intakes Nissan 370Z FREE SHIPPING : IntensePOWER!	INTENSEPOWER	Exhaust/Intake	206	08-27-2010 03:41 PM
SUNDAY March, 14 2010 UN BIAS Comparrsion for AFTERMARKET INTAKES--- FREE DYNO PULLS	htt760	Southern California Region	8	03-16-2010 07:14 PM
EDFC (Electronic Damping Force Controller) WTF!!	bluestyle55	Brakes & Suspension	12	03-03-2010 01:25 PM
injen cold air intakes! or still G3 intakes? wich is better	fg2rick	Intake/Exhaust	10	12-08-2009 03:49 PM