Z1 Motorsports: 370Z / G37 Cold Air Intake Kit $448

John@Z1 · 11-23-2015, 11:36 AM

Z1 Motorsports 370Z / G37 Cold Air Intake Kit

The Z1 Motorsports VQ37VHR Cold air intake for dual throttle body cars provides improved flow and a cooler denser air charge resulting in greater combustion efficiency and more power. Significant gains in power and response have been proven with this torture tested intake.

The new intake uses race proven technology by including two specially designed large media air filters with integrated velocity stacks for increased air flow. A velocity stack is designed to maximize and optimize air flow by allowing air to gently enter the intake piping through an un-obstructed rounded taper (similar to a trumpet horn.) This results in less intake turbulence and increased air velocity, allowing your intake system to work at it's maximum potential!

While every cars result may differ depending on mods and tune, Z1 Motorsports was able to achieve an increased 10whp and and additional 10lb-ft of torque in house on a car previously equipped with just a Full Tomei Expreme Ti Exhaust. No re-tune was performed to achieve these results! You can expect even greater results when re-tune is performed.

Intake Kit Includes:

(2) Aluminum Intake Hard Pipes
(2) Silicone Straight Reducer Hose
(2) Silicone Throttle Body to Hard Pipe Adapter
(2) Aluminum 90° Hose to Filter Adapter
(2) Z1 High Flow Velocity Stack Air Filters
(1) Z1 Silicone Side PCV Breather Hose Set
(10) Intake Coupler Clamps
(1) Intake Installation Instructions

To Purchase Your Order Please Click Here!

VDesi07 · 11-23-2015, 03:52 PM

Is the cut out required similar to the Stillen intakes?

Any deals going on for black friday?

Was going to pull the plug on some stillen intakes but now I may have changed my mind

John@Z1 · 11-23-2015, 04:42 PM

Quote:

Originally Posted by VDesi07

Is the cut out required similar to the Stillen intakes?

Any deals going on for black friday?

Was going to pull the plug on some stillen intakes but now I may have changed my mind

Not cutting for these and be sure to check out our Black Friday post!

JC-Nismo · 11-23-2015, 04:45 PM

Looks good.

arends177 · 11-23-2015, 05:34 PM

This may sound stupid, but do they make the same power as the stillens or about the same? I'm ready to max out my credit cards this black friday. BTW that's SolidWorks right?

derraj06 · 11-24-2015, 07:21 PM

When will you have a dyno vs stock and gen3s? Considering switching from Gen3s to this but need more data.

John@Z1 · 12-03-2015, 09:31 AM

Quote:

Originally Posted by derraj06

When will you have a dyno vs stock and gen3s? Considering switching from Gen3s to this but need more data.

Hopefully next week after we recover from the holiday sale.

John@Z1 · 12-15-2015, 08:01 AM

We performed back to back testing against Stillen Gen 3 and they were with in 1-2hp of each other one each run. The Z1 intake did make more top end on the 10th dyno run than the Stillen system on it's 10th pull.

Krylon · 12-15-2015, 11:18 PM

Awaiting the restocking of the polished version. Any pics of the black with red/blue silicone?

370Z JT · 12-21-2015, 12:26 AM

What's the inner diameter?

Mike · 12-22-2015, 05:18 PM

those would look great powdercoated

SS_Firehawk · 12-22-2015, 05:45 PM

I have the black/blue silicone. I'll snap a pic and update

SS_Firehawk · 12-23-2015, 11:05 AM

This is on my Magma Red Nismo. Tried to get every interesting angle on em lol. I like the intakes a lot. Worth every penny I paid.

SwissCheese · 12-25-2015, 09:54 PM

Quote:

Originally Posted by SS_Firehawk

This is on my Magma Red Nismo. Tried to get every interesting angle on em lol. I like the intakes a lot. Worth every penny I paid.

( Click to show/hide )

Nice pics! Do the tubes rub against the AC line at all, like the Stillen Gen 3s?

Krylon · 12-27-2015, 06:34 PM

Those are great pics and helped a lot for reference! Thanks!

11-23-2015, 11:36 AM	#1 (permalink)
John@Z1 The370Z.com Sponsor Join Date: Nov 2008 Location: GA Posts: 1,589 Drives: Turbos Rep Power: 20	Z1 Motorsports: 370Z / G37 Cold Air Intake Kit $448 Z1 Motorsports 370Z / G37 Cold Air Intake Kit The Z1 Motorsports VQ37VHR Cold air intake for dual throttle body cars provides improved flow and a cooler denser air charge resulting in greater combustion efficiency and more power. Significant gains in power and response have been proven with this torture tested intake. The new intake uses race proven technology by including two specially designed large media air filters with integrated velocity stacks for increased air flow. A velocity stack is designed to maximize and optimize air flow by allowing air to gently enter the intake piping through an un-obstructed rounded taper (similar to a trumpet horn.) This results in less intake turbulence and increased air velocity, allowing your intake system to work at it's maximum potential! While every cars result may differ depending on mods and tune, Z1 Motorsports was able to achieve an increased 10whp and and additional 10lb-ft of torque in house on a car previously equipped with just a Full Tomei Expreme Ti Exhaust. No re-tune was performed to achieve these results! You can expect even greater results when re-tune is performed. Intake Kit Includes: (2) Aluminum Intake Hard Pipes (2) Silicone Straight Reducer Hose (2) Silicone Throttle Body to Hard Pipe Adapter (2) Aluminum 90° Hose to Filter Adapter (2) Z1 High Flow Velocity Stack Air Filters (1) Z1 Silicone Side PCV Breather Hose Set (10) Intake Coupler Clamps (1) Intake Installation Instructions To Purchase Your Order Please Click Here! jaytirbhaw, /Angelo350Z/, Cbtech and 4 others like this. __________________ Z1 Motorsports will beat any advertised price on Nissan OEM Parts! 770-838-7777 ext 311 AIM: JohnatZ1 email: John@Z1motorsports.com

11-23-2015, 05:34 PM	#5 (permalink)
arends177 Base Member Join Date: Feb 2015 Location: Florda Posts: 59 Drives: 2016 370z Sport Pkg Rep Power: 11	This may sound stupid, but do they make the same power as the stillens or about the same? I'm ready to max out my credit cards this black friday. BTW that's SolidWorks right? SwissCheese likes this. __________________ Last edited by arends177; 11-23-2015 at 09:48 PM.

11-24-2015, 07:21 PM	#6 (permalink)
derraj06 Enthusiast Member Join Date: Jun 2013 Location: Huntsville, AL Posts: 406 Drives: MB 370z Rep Power: 12	When will you have a dyno vs stock and gen3s? Considering switching from Gen3s to this but need more data. arends177 likes this.

12-15-2015, 08:01 AM	#8 (permalink)
John@Z1 The370Z.com Sponsor Join Date: Nov 2008 Location: GA Posts: 1,589 Drives: Turbos Rep Power: 20	We performed back to back testing against Stillen Gen 3 and they were with in 1-2hp of each other one each run. The Z1 intake did make more top end on the 10th dyno run than the Stillen system on it's 10th pull. __________________ Z1 Motorsports will beat any advertised price on Nissan OEM Parts! 770-838-7777 ext 311 AIM: JohnatZ1 email: John@Z1motorsports.com

12-21-2015, 12:26 AM	#10 (permalink)
370Z JT A True Z Fanatic Join Date: Jan 2010 Location: United States Posts: 2,905 Drives: 370Z PW 7AT Rep Power: 379	What's the inner diameter? __________________ Click for My Journal Top Secret \| EVO-R \| Fujimura Auto \| Shine Auto \| Seibon \| MRWorks \| Swift \| SPC \| SSR \| UpRev \| Project Kics \| NST \| Titek \| Eibach \| Nismo \| Whiteline \| Quaife \| Invidia \| Fly1 \| CF Element \| Carbon Signal

11-23-2015, 03:52 PM	#2 (permalink)
VDesi07 Base Member Join Date: Apr 2014 Location: Orlando Posts: 90 Drives: 14' White 370z Sport Rep Power: 11	Is the cut out required similar to the Stillen intakes? Any deals going on for black friday? Was going to pull the plug on some stillen intakes but now I may have changed my mind

11-23-2015, 04:45 PM	#4 (permalink)
JC-Nismo A True Z Fanatic Join Date: Sep 2014 Location: Atlanta Posts: 1,244 Drives: 2011 Nismo 370z Rep Power: 13	Looks good.

12-15-2015, 11:18 PM	#9 (permalink)
Krylon Base Member Join Date: Nov 2015 Location: Virginia Posts: 153 Drives: 370Z Rep Power: 20	Awaiting the restocking of the polished version. Any pics of the black with red/blue silicone?

12-22-2015, 05:18 PM	#11 (permalink)
Mike The370Z.com Sponsor Join Date: Jun 2009 Location: Loganville, GA Posts: 5,944 Drives: 370z Rep Power: 2186	those would look great powdercoated __________________ NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z Porsche: 93 968 / 23 Macan GTS / 93 968

12-22-2015, 05:45 PM	#12 (permalink)
SS_Firehawk Premium Member Join Date: Oct 2011 Location: Tampa Posts: 4,142 Drives: 13' Magma Red Nismo Rep Power: 7335	I have the black/blue silicone. I'll snap a pic and update SwissCheese likes this. __________________ Old Car:GTM TSC'd 550whp / 410lbft tq @ 11.88PSI New Car: Under Construction

12-23-2015, 11:05 AM	#13 (permalink)
SS_Firehawk Premium Member Join Date: Oct 2011 Location: Tampa Posts: 4,142 Drives: 13' Magma Red Nismo Rep Power: 7335	This is on my Magma Red Nismo. Tried to get every interesting angle on em lol. I like the intakes a lot. Worth every penny I paid. /Angelo350Z/ and Silly Rabbit like this. __________________ Old Car:GTM TSC'd 550whp / 410lbft tq @ 11.88PSI New Car: Under Construction

12-27-2015, 06:34 PM	#15 (permalink)
Krylon Base Member Join Date: Nov 2015 Location: Virginia Posts: 153 Drives: 370Z Rep Power: 20	Those are great pics and helped a lot for reference! Thanks!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Best cold air intake for 370z nismo?	manolakiNIZ	Nissan 370Z General Discussions	15	10-25-2014 08:51 PM
2010 370Z AEM Cold Air Intake,	KenAEM	Intake/Exhaust	5	07-11-2011 10:16 PM
AEM 370z Cold Air Intake System with ETI	370zNismo66	Parts for sale (Private Classifieds)	3	02-11-2011 10:54 PM
370Z AEM cold air intake and Exhaust	KenAEM	Engine & Drivetrain	6	10-09-2009 10:51 PM