We here at MA Motorsports deal in only Quality products for your 370Z, PM me with any specific questions, or package deals with other products!




Fast Intentions

370Z TDX Cat Back Exhaust System

http://www.fastintentions.com/images...14-image66.jpg

Designed to maximize performance while keeping the stock note of the vehicle intact. This system simply enhances the original sound of the car by making it deeper, smoother and louder. At idle and cruising speeds the volume is unobtrusive. While at wide open throttle the exhaust system comes to life. The addition of this cat back will improve the aesthetics of your vehicle with its sporty, yet classy look.

PRODUCT INFO

• Components are constructed of T-304 stainless steel.

• 2.5" NON POLISHED stainless steel tubing.

• 6"x14" round polished stainless steel perforated core mufflers.

• 4.5" resonated dual wall slash cut polished stainless steel tips.

• The X Pipe has 3 options. Non Resonated, 12" Resonators or 18" Resonators. The resonators are strictly noise canceling devices. They DO NOT hinder performance at all. They are primarily designed to cut down interior noise resonance AKA "Drone"! The longer the resonator, the quieter the interior noise.

• Optional 6"x14" round carbon fiber perforated core mufflers.
WE ARE THE ONLY ONES WHO OFFER THIS OPTION!

• The front of the mufflers are the lowest point of the exhaust system which is no lower than the stock exhaust!

• All new gaskets and hardware are included.

• Limited lifetime warranty on all welds and craftsmanship. All resonators, mufflers and tips have a 3 year warranty.

• Made in the USA.

BENEFITS

• An increased average of 20 RWH & 11 LBS of torque over the stock cat back.

• Refining the stock note by increasing the depth and volume.

• Absolutely NO RASP from RPM idle to RPM red line.

• Polished stainless steel (muffler) system weighs 47 LBS = 10 LBS lighter than stock.

• Carbon fiber (muffler) system weighs 41 LBS = 16 LBS lighter than stock.



http://www.fastintentions.com/images...14-image69.jpg

VQ37HR Long Tube Headers

http://www.fastintentions.com/images...6-image361.jpg

The worlds FIRST and only long tube production header for the "VQ37VHR" motor. Designed with maximum performance in mind, we have created the unthinkable for a Nissan 370Z. Up until now the only header that existed was a "shorty". After doing extensive research we determined the only way to increase performance over the stock manifold was to design a long tube. Well, here it is:
http://www.fastintentions.com/images...6-image201.jpg
http://www.fastintentions.com/images...6-image270.jpg

PRODUCT INFO

• Our headers bolt into OEM location eliminating the stock manifold and catalytic converters.

• All tubing is T-304 NON POLISHED stainless steel.

• All flanges are mild steel and then nickel plated to ensure they will never rust

• (Standard) J-Bend style O2 sensor anti fouler to ensure the CEL light STAYS OFF.

• For an additional charge high temperature (silver) ceramic coating available. Ceramic coating can withstand heat up to 1200 Degrees Fahrenheit. The ceramic coating will allow less heat to escape from the headers and keep the engine bay cooler. We recommend this process for supercharged applications.

• All gaskets and hardware are included.

• Limited lifetime warranty on all welds and craftsmanship.

• Made in the USA.

BENEFITS

• All power and torque numbers were dyno tested against a Nissan 370Z which had FI high flow cats & a FI TDX CBE.
We gained an average of 8 RWH peak horsepower. Throughout the power curve we saw a max increase of 15 RWH & 18 LBS of torque.

• FI long tube headers weigh 21 LBS = 17LBS lighter than the OEM manifolds and catalytic converters.


Also Available

-370Z (300 cell) High Flow Cats
-370Z Resonated High Flow Cats
-370Z Resonated Test Pipes
-370Z Non resonated Test Pipes



APEXi

Apexi RS Evo Extreme W/resonators
Apexi RS Evo Extreme With Out Resonators

http://www.apexi-usa.com/store/media...114-kn69-1.jpg

http://www.apexi-usa.com/store/media...14BN069J_1.jpg

The RS Evolution Extreme is based on the RS Evolution Muffler with the addition of full titanium tips. A Hybrid muffler uniting the power and free-flowing characteristics of our N1 Muffler with the quiet and discreet sound output of our Hybrid Megaphone Evolution Muffler. The RS Evolution Muffler is a combination of an A'PEXi original patented megaphone piping structure design and larger piping diameters to produce ultimate performance for your turbo-charged engine.


PRODUCT FEATURES:

- High-level of quality using tig-welded SUS304 stainless steel uniting quiet performance with high-power performance gains

- Matched and manufactured for select chassis

- Patented Megaphone piping structure to produce excellent torque and throttle response throughout the powerband. This piping design allows for a swirling exhaust gas flow effect that has for years produced proven results



HKS

370Z 2009 & UP HI-POWER EXHAUST TI TIPS

http://cdn1.bigcommerce.com/n-dvzvde...0.1200.jpg?c=2
http://cdn1.bigcommerce.com/n-dvzvde...0.1200.jpg?c=2


370Z LEGAMAX PREMIUM EXHAUST

http://cdn1.bigcommerce.com/n-dvzvde...0.1200.jpg?c=2


Tanabe Medallion Touring Dual Muffler Catback Exhaust

http://d5otzd52uv6zz.cloudfront.net/...a29b6d-800.jpg
http://www.tanabe-usa.com/images/gat...on_touring.jpg


Other Brands Available upon request:
-Borla
-Magnaflow
-Invidia
-Injen
-AFE



PM ME WITH ANY QUESTIONS OR PRICE REQUESTS

Originally Posted by nomodsjk (Post 3271466) I'm about an hour away from you guys and have spoken with someone on the phone about some work although I don't remember his name but I Definitely want a fast intentions exhaust with the carbon cans. Also i am in need of an upgraded fuel pump that I'm trying to get from cjm but am open to other options. I'm currently tuned by r /t tuning in Lansdale PA but they're just too far away from me so I'm looking to have you guys do some work for me and retune it when it's done so I don't have to keep driving 4 hours North to get my work done. Please let me know when I can get an appointment. Thanks- Rich.