N/A build

Megan370z · 12-28-2014, 05:43 PM

Quote:

Originally Posted by SlowZ

I wanted to bore out the stock ones but I think I read somewhere that most go is like 68mm but I could be wrong. But for the money someone could get two maxima TB. I already have the upper plenum ported. How much did you spend on the adaptors? And what do you mean by a re-pin? Thanks for the pictures and info

that 68mm is the outside mesurement pretty much on the intake manifold inlet.
I wouldnt go more than 65mm....
keep it mind, its plastic.

I spend 10$ on the 2 adapter that I machined at work and a couple hours.

The 370z as you know has 2 TB and they arent interchangeable.
the plug arent pinned the same from both side.

Like I said if I remember correctly its the driver side that need to be re-pinned like the passenger side.

that was my secret mod at the time just before I blew the VVEL and then well it was put on hold. Never tried the setup.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
TT build in Fl	travnflorida	Nissan 370Z General Discussions	3	08-15-2011 05:51 PM
THE "Lets argue about Bullitt's build with out ruining Bullitt's build thread" THREAD	Reaper42	Forced Induction	14	01-22-2011 05:24 PM
My build	toner123	Forced Induction	108	09-10-2010 08:31 AM
Datsun Roadster 1600...To build or not to build	motoextreme	The Lounge (Off Topic)	66	02-13-2010 12:40 AM
You can build it..	bossman	Nissan 370Z General Discussions	1	01-03-2009 05:31 PM