So i'm buying a block after this year and plan on building the motor at a tortoises pace, I would like to have a beast street car with occasional track
|
|
LinkBack | Thread Tools | Display Modes |
12-21-2014, 11:37 PM | #1 (permalink) |
A True Z Fanatic
Join Date: Apr 2013
Location: st. petersburg
Posts: 5,709
Drives: 09 nissan 370z Sp M6
Rep Power: 295378 |
N/A build
So i'm buying a block after this year and plan on building the motor at a tortoises pace, I would like to have a beast street car with occasional track usage, never going to drag the car . I don't want to stroke the motor and I would like to keep the VVel heads. Would like some guidance. Here is what I'm thinking please feel free to correct me. Forged carrillo pistions (compression ratio??), arias or wiesco pistons, racing engine bearings, jun cams, and along with the other bolts ons, bigger fuel injectors and intake manifold and dry sump.
|
12-21-2014, 11:52 PM | #2 (permalink) |
Enthusiast Member
Join Date: Dec 2013
Location: Tampa
Posts: 360
Drives: 06 Eclipse GS
Rep Power: 12 |
Im sure you've seen 1slow370z's build, some good info there you can build off of. Unfortunatley I dont have any knowledge to share, but I wish you good luck
Last edited by Eclipz; 12-21-2014 at 11:55 PM. |
12-22-2014, 04:49 AM | #3 (permalink) |
A True Z Fanatic
Join Date: Oct 2010
Location: Crooklyn
Posts: 1,008
Drives: 370Z 6psd-sport-pkg
Rep Power: 21 |
N/A build eh? Well the number one question will be what are u building it for? track? Drag?(although ill doubt Drag)competition? ... w/e it is, it all has its own setup.
u need 2 convert to e85 setup with return fuel line and a pump that can has more flow for ur upgraded injectors, also setup 9:1 comp ratio and 4.5L internal setup an all. whole list cost lots. damn lots...raze rpm limit to 8.5 maybe 9k = 450hp?????
__________________
Kids don't do Drugs, Drugs are bad, so let the professional druggies do Drugs for you. 537whp/496lb/tq@8-9PSI 93 octane Last edited by DOOMMONKEY777; 12-22-2014 at 05:13 AM. |
12-22-2014, 07:46 AM | #4 (permalink) |
A True Z Fanatic
Join Date: Jul 2013
Location: Puerto Rico
Posts: 7,157
Drives: 13 Nissan 370Z SP M6
Rep Power: 7586 |
why you dont check first how much you are going to spend upgrading your Z with a N/A setup VS installing a TT or SC setup... And how much whp do you want? my experience is that we always want more power on our cars hahha!! and in my case im just going to install some N/A parts like intakes, catback and maybe a tune.... when i finish that im going to start saving to go with a TT setup... just my 2 cents!
|
12-22-2014, 09:39 AM | #5 (permalink) |
A True Z Fanatic
Join Date: May 2011
Location: KCMO
Posts: 3,458
Drives: 09 370z S/T 6MT
Rep Power: 20 |
imo, i'd ditch the vvel, go dry sump, and rev that b*tch to 9000
__________________
09 370Z ST 6MT//Injen CAI//Greddy CBE//TP//TSW's//Swifts//Stillen lip//Whiteline sways
326whp/268tq |
12-22-2014, 09:44 AM | #6 (permalink) | |
A True Z Fanatic
Join Date: Jan 2013
Location: NJ
Posts: 1,726
Drives: PW Z
Rep Power: 15 |
Quote:
|
|
12-22-2014, 10:34 AM | #8 (permalink) |
A True Z Fanatic
Join Date: Apr 2013
Location: st. petersburg
Posts: 5,709
Drives: 09 nissan 370z Sp M6
Rep Power: 295378 |
I don't want to drag the car, I rather it have a set up for the track so I could take it out their every once in while. Far as power I know I'm going to have to rev the **** out of it to make power, I would like to have 400-425 whp on a NA set. I know the cost to attain that much power out of a NA would be a the same as going to F.I. route. Personally I love the way an all motor high revving engine speaks
|
12-22-2014, 10:47 AM | #9 (permalink) |
Enthusiast Member
Join Date: Mar 2013
Location: Rahway,NJ
Posts: 297
Drives: 2010 40th 370z
Rep Power: 364 |
Any off the shelf piston is going to be too low of a compression for n/a power.Honestly youd probably be fine staying on stock pistons if your not looking into stroking the motor. And as stated before Id really get rid of vvel if your going that route. Do some hr heads and cams and then youll make power. Dry sump would be awesome but is really expensive, maybe look into the upgraded nismo pump it should handle higher rpms.
|
12-22-2014, 10:54 AM | #10 (permalink) |
A True Z Fanatic
Join Date: May 2011
Location: KCMO
Posts: 3,458
Drives: 09 370z S/T 6MT
Rep Power: 20 |
i think the nismo pump will still have issues above 8300
__________________
09 370Z ST 6MT//Injen CAI//Greddy CBE//TP//TSW's//Swifts//Stillen lip//Whiteline sways
326whp/268tq |
12-22-2014, 11:12 AM | #11 (permalink) |
A True Z Fanatic
Join Date: Apr 2013
Location: st. petersburg
Posts: 5,709
Drives: 09 nissan 370z Sp M6
Rep Power: 295378 |
^^^ agreed. I would stay with stock piston, but if they let go at high revs. I'd be pissed to have to tear down the block again. When I go to build the motor I want to do it right the first time, instead of spending countless amount of money trying to take the cheaper route. Plus no one has any evidence on how high you can spin the stock internals, plus the durability at those rpms
|
12-22-2014, 11:15 AM | #12 (permalink) |
A True Z Fanatic
Join Date: Jan 2009
Location: Socal
Posts: 10,203
Drives: WOT
Rep Power: 5850 |
Subd
__________________
638WHP 541WTQ @ 13.5PSI
Build thread |
12-22-2014, 11:22 AM | #13 (permalink) |
Enthusiast Member
Join Date: Mar 2013
Location: Rahway,NJ
Posts: 297
Drives: 2010 40th 370z
Rep Power: 364 |
I agree with that, then best bet is to look into some custom pistons maybe see if any of the companies will make you forged ones with oem compression or maybe a little higher.
|
12-22-2014, 12:02 PM | #14 (permalink) | |
A True Z Fanatic
Join Date: Jul 2013
Location: Puerto Rico
Posts: 7,157
Drives: 13 Nissan 370Z SP M6
Rep Power: 7586 |
Quote:
|
|
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
TT build in Fl | travnflorida | Nissan 370Z General Discussions | 3 | 08-15-2011 06:51 PM |
THE "Lets argue about Bullitt's build with out ruining Bullitt's build thread" THREAD | Reaper42 | Forced Induction | 14 | 01-22-2011 06:24 PM |
My build | toner123 | Forced Induction | 108 | 09-10-2010 09:31 AM |
Datsun Roadster 1600...To build or not to build | motoextreme | The Lounge (Off Topic) | 66 | 02-13-2010 01:40 AM |
You can build it.. | bossman | Nissan 370Z General Discussions | 1 | 01-03-2009 06:31 PM |