Stroker Kit plus Cams
 

Wanted to see if anybody has done both the stroker kit and June Exhaust Cams? If so did you encounter anything specific with the VVEL? Also any dyno numbers to support the build? I have seen several folks with the stroker kit but not the combination of both so testing waters.

Well I was on the same track and the hardest thing is to get the Jun cams. I think there discontinued. But with a full 4.3 litre stroker kit bored .040 over and 12.1 pistons it should put you around the 400whp range. Tuning will be the major issue like anything else. Good luck if you decide to go that route it will be a badass build.

Ive ordered a GTM 4.2 stroker 11.1 with my june cams.
fully built engine.
When it get to me ( lord knows when that will happen). I will run it N/A before I put the SC on it.
WE will just have to wait.

Z

At first I was like are these new cams? But quickly realized you mean JUN cams. I do not believe anyone has even installed and dyno'd just the JUN cams. I know Navyboy was working on getting it done as the beta but he had to sell his car. So... one of you will be the first especially adding a stroker kit to the mix. It will be interesting to see what you are able to get out of it Z Eliminator.

yeah the few ppl that have gotten jun cams have done other mods to it so there's no data for results either positive or negative of just the cams. It will be great if somebody does get just the cams install them and see if the're in actual gains. I'm sure you will see some with the stroker kit. GL

I have been looking at NA build with Heads and Cams unfortunately if i do the VR heads (350z) I lose the VVEL. Seems like the path I may go is the Brian Crower Stroker kit and pair it up with a turbo kit.