What is Up with These Clutches!?

JARblue · 11-04-2014, 01:46 PM

If you get another OEM one, just be prepared for the same $hit to happen again

radensb · 11-04-2014, 02:10 PM

Quote:

Originally Posted by Chuck33079

I'm not sure why you keep arguing. You can try and rationalize things, but at the end of the day you aren't the first person to have your problem. Guess what ended up being the issue for all those other people? The answer has been given to you several times in this thread alone, not to mention the thousands of similar posts on this forum.

Dealerships must love you. Lets just replace things without truly understanding what is wrong. I'm not arguing because I am not open to the possibility that the parts are failing again. I am pointing out the inconsistencies in the suggestions and my symptoms. Inconsistencies that no one has yet to actually explain. This is how you explore possible causes and discover solutions. I don't want to just fix this, I want to understand exactly what is happening in MY situation that coincide with the contradicting symptoms that I have. Do you know what else happened to all those people that got their master and slaves replaced and had their issue resolved? They all got new fluid too. Are you going to tell me that there is no way that couldn't have been the problem all along?

Here are the facts for my situation:

No Fluid Loss
Pressure only decreases after long periods of not shifting and while the car is driving. If it sits in the garage all night, it is still fine the next morning.
Pumping the peddle after not shifting for a while returns pressure and pressure is consistent with regular usage in city driving.
Flushing the fluid corrected an un-drivable situation already for months of regular/daily use and before that situation was corrected, the issue was relieved after only seconds of stopping and starting the engine.

If the system was leaking, I would be loosing fluid and a fluid flush would not 100% correct the problem for months and the actions that were taken to relieve the previous issues have no influence on the parts. This is why I am leaning on issues not related to the parts them self.

When people replace the CSC with an aftermarket, are ALL clutch issues resolved permanently? Are they replacing the master with an aftermarket too? Are they still using GT-R or equivalent fluids?

jaytirbhaw · 11-04-2014, 02:16 PM

Quote:

Originally Posted by radensb

Dealerships must love you. Lets just replace things without truly understanding what is wrong. I'm not arguing because I am not open to the possibility that the parts are failing again. I am pointing out the inconsistencies in the suggestions and my symptoms. Inconsistencies that no one has yet to actually explain. This is how you explore possible causes and discover solutions. I don't want to just fix this, I want to understand exactly what is happening in MY situation that coincide with the contradicting symptoms that I have. Do you know what else happened to all those people that got their master and slaves replaced and had their issue resolved? They all got new fluid too. Are you going to tell me that there is no way that couldn't have been the problem all along?

Here are the facts for my situation:

No Fluid Loss
Pressure only decreases after long periods of not shifting and while the car is driving. If it sits in the garage all night, it is still fine the next morning.
Pumping the peddle after not shifting for a while returns pressure and pressure is consistent with regular usage in city driving.
Flushing the fluid corrected an un-drivable situation already for months of regular/daily use and before that situation was corrected, the issue was relieved after only seconds of stopping and starting the engine.

If the system was leaking, I would be loosing fluid and a fluid flush would not 100% correct the problem for months and the actions that were taken to relieve the previous issues have no influence on the parts. This is why I am leaning on issues not related to the parts them self.

When people replace the CSC with an aftermarket, are ALL clutch issues resolved permanently? Are they replacing the master with an aftermarket too? Are they still using GT-R or equivalent fluids?

everyone that replaces the CSC also replaces the Master at the same time, it is a must, if they haven't then it will fail. There is no after market master, but an aftermarket CSC often reduces the chance of master failure, they go sort of hand in hand IIRC.

GT-R fluid is not a fix its just the dealers BS. Redline is what most will agree is the fluid that is needed.

your symptoms are consistent with master cylinder failure which takes place over a span of time. Either that or you're boiling your fluid all the time. But it is your car bro, we can all just offer suggestions.

1slow370 · 11-04-2014, 02:25 PM

Its a hydraulic system if you lose a half a cc of fluid and get in air pocket it wont eork right and if you can tell that you lost a half a cc of fluid from looking at the side of the reservoir you must have the most accurate eyecrometer ever. It starts out as a minute leak caused by contaminates in the fluid lifting the outer seal on the csc and eventually it wears the seal down and turns into a noticable leak. Stfu replacr ur **** and be happy. The nissan design is garbage replace it or deal. If that isnt a good enough explanation for you why dont you go hire an engineering firm to do a life and failure anaylisis study on your car, you seem upset enough to drop the $40k to get one done

Sent from my HTCONE using Tapatalk

JARblue · 11-04-2014, 03:11 PM

Quote:

Originally Posted by radensb

Lets just replace things without truly understanding what is wrong. I'm not arguing because I am not open to the possibility that the parts are failing again. I am pointing out the inconsistencies in the suggestions and my symptoms. Inconsistencies that no one has yet to actually explain.

The CSC/CMC issue has been discussed at length and fully explained in many, many threads on this forum previously. I'm am sorry that you could not take the time to search and understand for yourself. You have taken a very argumentative approach, which is why you're getting the curt responses. Replace your CSC with an aftermarket solution, replace the CMC with a new OEM one, put in some Motul RBF600 fluid, and be done with it. If you want to argue with that, then you deserve to have to deal with OEM CSCs failing for the duration you own the car

MJB · 11-04-2014, 03:42 PM

Quote:

Originally Posted by Chuck33079

I'm not sure why you keep arguing. You can try and rationalize things, but at the end of the day you aren't the first person to have your problem. Guess what ended up being the issue for all those other people? The answer has been given to you several times in this thread alone, not to mention the thousands of similar posts on this forum.

Dude, I argued with this guy before... He kept insisting that normal street driving was causing the fluid to boil which was causing pressure loss. I told him over and over that if just installed the Zspeed HD CSC then the issue would be over. Its bad seals in the CSC, what more do we have to say about that?

*OP, call Zspeed Performance @ 937-665-0450 and ask for Joe. He will explain everything in depth if you are still in doubt with what we have already told you.

1slow370 · 11-04-2014, 04:08 PM

^ Op will just say that joe is just tellin him stuff to sell him parts and that it can't be true

jwick · 11-04-2014, 04:19 PM

This is routinely becoming our bi-weekly new thread topic

JARblue · 11-04-2014, 05:28 PM

Along with AT v MT

kenchan · 11-04-2014, 05:29 PM

the answer to all your problems is to get an AT.

JARblue · 11-04-2014, 05:30 PM

/thread

jwick · 11-04-2014, 05:31 PM

Quote:

Originally Posted by JARblue

Along with AT v MT

That's cuz AT's are for *******

Skyscraper · 11-04-2014, 06:14 PM

I had my CSC replaced with an OEM CSC, I know, I know. Have a lot of things on my plate right now and since my Z's under warranty the total replacement was $100 out of pocket for me. The clutch feels sooooo much better and smoother than before and the engagement window seems much easier to work with. If this one only lasts as long as the original I'm still cool with that. If and when it goes out again I'l pony up the bucks for an aftermarket part. Until then, I'm super stoked to be driving my Z again, it feels better than ever to drive!

radensb · 11-04-2014, 06:16 PM

I drove both the AT and MT versions. MT was way more fun. I wouldnt have it any other way in these cars. It sux the clutch system is such crap.

I have an appointment with the dealer tomorrow for a free inspection. The tech I talked to said it did in fact sound more like a fluid issue given my symptoms and how long ago the new parts were installed, so they will see. He said he has seen issues pop up due to inadequate or missing heat shielding that was removed during previous CSC replacements and if that is the case, they will flush and re-shield it at no cost for me. I have read countless posts on this topic, but I think my situation is different. We will see what they find.

1slow370 · 11-04-2014, 06:21 PM

Quote:

Originally Posted by radensb

I drove both the AT and MT versions. MT was way more fun. I wouldnt have it any other way in these cars. It sux the clutch system is such crap.

I have an appointment with the dealer tomorrow for a free inspection. The tech I talked to said it did in fact sound more like a fluid issue given my symptoms and how long ago the new parts were installed, so they will see. He said he has seen issues pop up due to inadequate or missing heat shielding that was removed during previous CSC replacements and if that is the case, they will flush and re-shield it at no cost for me. I have read countless posts on this topic, but I think my situation is different. We will see what they find.

THERE IS NO F'N HEAT SHIELD it's just a little piece of fire sleeve over the clutch line and it does jack. But go ahead and bandaid that ish we'll here from you again in a week or so.

11-04-2014, 01:46 PM	#16 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 43 Posts: 36,450 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684440	If you get another OEM one, just be prepared for the same $hit to happen again __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

11-04-2014, 02:25 PM	#19 (permalink)
1slow370 A True Z Fanatic Join Date: Aug 2009 Location: In the D Posts: 3,732 Drives: v8 74 260z ;) Rep Power: 7251	Its a hydraulic system if you lose a half a cc of fluid and get in air pocket it wont eork right and if you can tell that you lost a half a cc of fluid from looking at the side of the reservoir you must have the most accurate eyecrometer ever. It starts out as a minute leak caused by contaminates in the fluid lifting the outer seal on the csc and eventually it wears the seal down and turns into a noticable leak. Stfu replacr ur ** and be happy. The nissan design is garbage replace it or deal. If that isnt a good enough explanation for you why dont you go hire an engineering firm to do a life and failure anaylisis study on your car, you seem upset enough to drop the $40k to get one done Sent from my HTCONE using Tapatalk JARblue and Chuck33079 like this. __________________ ANSWER PRICE LIST** Answers - - - - - - - - - - - - - - - - $0.75 Answers (requiring thought) - - - - $1.25 Answers (correct) - - - - - - - - - - $12.50

11-04-2014, 04:08 PM	#22 (permalink)
1slow370 A True Z Fanatic Join Date: Aug 2009 Location: In the D Posts: 3,732 Drives: v8 74 260z ;) Rep Power: 7251	^ Op will just say that joe is just tellin him stuff to sell him parts and that it can't be true JARblue and MJB like this. __________________ ANSWER PRICE LIST Answers - - - - - - - - - - - - - - - - $0.75 Answers (requiring thought) - - - - $1.25 Answers (correct) - - - - - - - - - - $12.50

11-04-2014, 04:19 PM	#23 (permalink)
jwick A True Z Fanatic Join Date: Dec 2010 Location: Houston Posts: 14,532 Drives: '10 G37 6MT Rep Power: 2465057	This is routinely becoming our bi-weekly new thread topic JARblue likes this. __________________ '10 G37T 6MT Graphite/Graphite - BP - G37T Build

11-04-2014, 05:28 PM	#24 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 43 Posts: 36,450 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684440	Along with AT v MT kenchan and jwick like this. __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

11-04-2014, 05:29 PM	#25 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	the answer to all your problems is to get an AT. JARblue likes this.

11-04-2014, 05:30 PM	#26 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 43 Posts: 36,450 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684440	/thread kenchan and onzedge like this. __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

11-04-2014, 06:14 PM	#28 (permalink)
Skyscraper Base Member Join Date: Jun 2014 Location: The skies above NorCal Posts: 72 Drives: 09 Touring Sport 6mt Rep Power: 11	I had my CSC replaced with an OEM CSC, I know, I know. Have a lot of things on my plate right now and since my Z's under warranty the total replacement was $100 out of pocket for me. The clutch feels sooooo much better and smoother than before and the engagement window seems much easier to work with. If this one only lasts as long as the original I'm still cool with that. If and when it goes out again I'l pony up the bucks for an aftermarket part. Until then, I'm super stoked to be driving my Z again, it feels better than ever to drive! MJB likes this.

11-04-2014, 06:16 PM	#29 (permalink)
radensb Base Member Join Date: Jan 2014 Location: California Posts: 148 Drives: 09 Nissan 370Z GM M6 Rep Power: 6721	I drove both the AT and MT versions. MT was way more fun. I wouldnt have it any other way in these cars. It sux the clutch system is such crap. I have an appointment with the dealer tomorrow for a free inspection. The tech I talked to said it did in fact sound more like a fluid issue given my symptoms and how long ago the new parts were installed, so they will see. He said he has seen issues pop up due to inadequate or missing heat shielding that was removed during previous CSC replacements and if that is the case, they will flush and re-shield it at no cost for me. I have read countless posts on this topic, but I think my situation is different. We will see what they find.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Forced Induction Capable clutches	SS_Firehawk	Engine & Drivetrain	18	12-18-2012 07:19 PM
clutches noise?	henryy370z	Nissan 370Z General Discussions	11	10-09-2012 12:26 AM
ClutchMasters Clutches/Aluminum Flywheels	corsport	CorSport	3	10-07-2011 03:40 PM
Help with the different kinds of clutches...	SDTANMAN92	Engine & Drivetrain	1	05-05-2011 08:52 PM
OS Giken Vs Exedy Spec Clutches	LateralG'z	Engine & Drivetrain	16	03-30-2010 07:29 AM