11-04-2014, 12:26 PM
|
#9 (permalink)
|
|
Base Member
Join Date: Jan 2014
Location: California
Posts: 165
Drives: 09 Nissan 370Z GM M6
Rep Power: 6722
|
Quote:
Originally Posted by Chuck33079
Dude. It's a failing master or CSC. It's the most discussed topic on this site. The OEM ones fail. The only solution is to replace the OEM CSC with an aftermarket one.
|
If it is the most discussed topic here, then there should be a better answer to exactly what is happening. While I agree that aftermarket is the way to go, there is no way consumers would tolerate a $1500 - $3000 repair every 6 months and that leads be to believe that there is another issue here.
A failing CSC would not suddenly work as normal for months of driving with just a fluid flush. Failed seals, as you suggested, means leaking. I don't have this and no fluid is leaving the system. This means one of two things. - Fluid is going somewhere else when I press the clutch (not sure how that could be possible, where would it go and how would it get back into the reservoir?)
- It is breaking down and boiling allowing for comprehensibility.
When I flushed the fluid 3 months ago, with the exact same symptoms, the problem was gone. If the CSC was failing, that would not be the case.
Is everyone here with an OEM CSC getting it replaced every 6 months?
|
|
|
Similar Threads
33Likes
Threaded Mode
