Anyone have issues with nst pullies

davex · 10-15-2014, 01:02 PM

I've had it since I was on the group buy list and I haven't had any issues. I believe SS_FireHawk has a dyno with it's results as well.

1cleanZ · 10-27-2014, 09:58 AM

I run the Stillen UD Pulley. Have ran it for 6 Auto-X events and 3 road course events with zero issues. Absolutel love the throttle rev response. It also holds your revs longer inbetween shifts allowing you to hold your RPMs higher avoiding engine bogging.

DEpointfive0 · 10-27-2014, 10:54 AM

And you can buy mine:
NST 10% UD pulley kit blue

jwick · 10-30-2014, 08:57 AM

Quote:

Originally Posted by DEpointfive0

And you can buy mine:
NST 10% UD pulley kit blue

Cheep plug

Chuck33079 · 10-30-2014, 09:06 AM

Quote:

Originally Posted by DEpointfive0

And you can buy mine:
NST 10% UD pulley kit blue

Wow, you have more NST pullies in stock than NST.

370zBLAST · 03-29-2023, 06:27 PM

so its been 9 years since the last post, has anyone running these have issues? i scored a set New off facebook MP and now im 2nd guessing myself, if i should run them

Joey

Spooler · 03-29-2023, 08:15 PM

Quote:

Originally Posted by 370zBLAST

so its been 9 years since the last post, has anyone running these have issues? i scored a set New off facebook MP and now im 2nd guessing myself, if i should run them

Joey

They will break. Don't run it.

Rusty · 03-30-2023, 05:53 AM

Quote:

Originally Posted by 370zBLAST

so its been 9 years since the last post, has anyone running these have issues? i scored a set New off facebook MP and now im 2nd guessing myself, if i should run them

Joey

People had a lot of issues with them over the years.

NorthStyle · 03-30-2023, 12:46 PM

As stated above, I believe NST had issues with their initial batch(es) of pulleys. I've been running my set since ~2016 with no issues. However, I intend to change to the ATI pulley whenever I boost my car in the future.

ZoomZ · 03-31-2023, 11:55 AM

Quote:

Originally Posted by Spooler

I have never ever seen an issue with reusing the crank bolt. I would reuse it in a heartbeat and never think a thing about it.

It's $10 for a new one.

Trips · 04-01-2023, 12:45 AM

Don’t buy/install NST pulley

Tractionless · 04-01-2023, 12:33 PM

Quote:

Originally Posted by ZoomZ

It's $10 for a new one.

Crazy what people skimp on when installing hundreds or thousands of dollars worth of parts huh?

ZoomZ · 04-01-2023, 12:37 PM

Quote:

Originally Posted by Tractionless

Crazy what people skimp on when installed hundreds of thousands of dollars worth of parts huh?

Airplane owners are the worst. Scary, I know.

10-15-2014, 01:02 PM	#16 (permalink)
davex Base Member Join Date: May 2013 Location: Cali Age: 34 Posts: 27 Drives: 13 Nissan 370z MG M6 Rep Power: 12	I've had it since I was on the group buy list and I haven't had any issues. I believe SS_FireHawk has a dyno with it's results as well. __________________ POW/MIA Never Forgotten! SLTW! Project Night Stalker in progress... Tein/AEM /NST/Powerhouse Amuse

10-27-2014, 09:58 AM	#17 (permalink)
1cleanZ A True Z Fanatic Join Date: Dec 2010 Location: Twin Cities, MN Posts: 1,132 Drives: '09 PW Nismo Rep Power: 21	I run the Stillen UD Pulley. Have ran it for 6 Auto-X events and 3 road course events with zero issues. Absolutel love the throttle rev response. It also holds your revs longer inbetween shifts allowing you to hold your RPMs higher avoiding engine bogging. __________________ 2009 PW Nismo #0021 -My Built Progress >>1cleanG to 1cleanZ<< Team NextLevel

10-27-2014, 10:54 AM	#18 (permalink)
DEpointfive0 Premium Member Bitches Join Date: Jan 2012 Location: SoCal Posts: 14,824 Drives: a lot Rep Power: 17152	And you can buy mine: NST 10% UD pulley kit blue __________________ Do YOU want to know what/where I got my username from? ( Click to show/hide ) NSFW due to language:

04-01-2023, 12:45 AM	#26 (permalink)
Trips Administrator Join Date: May 2009 Location: Disneyland, Ca Posts: 8,732 Drives: 🔰 Rep Power: 10	Don’t buy/install NST pulley __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
GTM issues	spawn350	Forced Induction	80	09-27-2012 09:21 PM
Quick review of NST Pullies for 370Z with dyno	370Z JT	Engine & Drivetrain	6	01-16-2012 09:49 PM
370 z top issues	sue z	New Forum Member	4	04-30-2011 08:55 PM
thinking of buying 370z, then GTM turbo's , but overheat issues,oil issues ??	Christopher	Nissan 370Z General Discussions	19	10-16-2009 04:55 PM
Initial Z issues that are now non-issues......	cave vulture	Nissan 370Z General Discussions	1	09-06-2009 11:19 PM

03-29-2023, 06:27 PM	#21 (permalink)
370zBLAST Base Member Join Date: Feb 2014 Location: ct Posts: 247 Drives: 09 370z 6spd Rep Power: 12	so its been 9 years since the last post, has anyone running these have issues? i scored a set New off facebook MP and now im 2nd guessing myself, if i should run them Joey

03-30-2023, 12:46 PM	#24 (permalink)
NorthStyle A True Z Fanatic Join Date: Aug 2015 Location: Deutschland + SC/FL USA Posts: 1,267 Drives: 2011 370Z Nismo Rep Power: 24277	As stated above, I believe NST had issues with their initial batch(es) of pulleys. I've been running my set since ~2016 with no issues. However, I intend to change to the ATI pulley whenever I boost my car in the future.