![]() |
Hi guys,
Know, I'm having problem with bank1 and bank2, The reading are not the same. Any idea ? :'( |
Yes Guys,
Just confirmed with the mechanic. The motor compression are not correct. |
Your welcome, but he needs to redo the entire install now, maybe have him follow the manual this time.
Edit: the valves are damaged from the actuator being improperly set the first time (which is unlikely) make sure to have him get it repaired for you. |
Guys,
know :) when they start the car I will have check engine and the car go to imp mode after 1 min. any opinion. how we would learn :) someone has to get problem and the rest will learn :) |
get me the code number, if you have a check engine you have a code number and i can at least tell you what they probably screwed up this time.
|
Ouch. Man I am glad I didn't jump on those cams when I had the chance. That would have been a nightmare.
Good luck OP. I think you are going to need it! |
Hi guys,
now I'm getting P1090 again with check engine and limp mode? The guy in shop said the fualt show now is about the wiring harness on VVEL bank1. any input on that. and P1090 is popping on with check engine. |
Whats the name of the shop may I ask?
|
Now it is in Saluki motorsport.
Now we end up with vvel ecu to be changed. |
for your sake I hope that's the end of it, but I don't think it will be.
|
:) what to do.
I dont mind it. it is the time to learn the hard way :') |
well at least it seems that your keeping your spirits high, good luck with the build. Hopefully you will get everything figured out, and once that happens I can't wait to see what the car makes. Soon enough people will be asking how and what you had to go through to complete the build. Have your tried contact Jun itself?
|
Hi Elmo370Z
Yes I did contact AutoJun and they sent me some info which is not helpful. And they stated that the cam should not makes problems :). |
yeah jun basically tells you to follow the fsm which is all you have to do for the record.
|
Quote:
|
All times are GMT -5. The time now is 04:49 PM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2