Another oil filter for Stillen oil cooler sandwich plate thread

[abm89]

Originally Posted by carlitos_370z

Just like me bro!!!! Thanks a lot for let me know

BTW and you use the 5w30 oil?

that was my last question

Redline, yes.

[carlitos_370z]

Originally Posted by abm89

Redline, yes.

Thanks!

[Zoren 370]

Carlito my friend yeah Fram is good. I just change the oil filter around 3k miles and change the oil at 4.5k

[carlitos_370z]

Originally Posted by Zoren 370

Carlito my friend yeah Fram is good. I just change the oil filter around 3k miles and change the oil at 4.5k

Thanks a lot brother! i almost text you to ask you that loool!

[Artsy]

Yeah so I tried using the k&n hp 1008 and didn't seal right, oil leaking everywhere , just ended up buying the Bosch one for $11 , just an FYI for people wondering about the k&n ( plus the k&n filter is tiny ) my Miata had a bigger filter than that one haha

[carlitos_370z]

Originally Posted by Artsy

Yeah so I tried using the k&n hp 1008 and didn't seal right, oil leaking everywhere , just ended up buying the Bosch one for $11 , just an FYI for people wondering about the k&n ( plus the k&n filter is tiny ) my Miata had a bigger filter than that one haha

Awesome thanks for the review man! I buy the kn filter and i return it lool im still using the Fram that comes with the kit. My question is... The Bosch filter seal great?

[DallasCRX]

FYI, I've been using the Amsoil EAO21 filter for my Stillen oil cooler, it appears this part number has been discontinued from Amsoil...

[d_runk96]

Wix 51381, NAPA 21381 or 1381

[VQ37]

I just sold me Z but Bosch D3312 fits perfect!

[carlitos_370z]

Good to know it im going to try it when I decide to install the oil cooler again

[Nooree01]

I have tried the K&N hp 1008, it didnt fit, tried the Bosch d3312 leaked alot, Mobil 1 m110 didnt work the only one that worked for me that was available in stock at oreillys was the wix 51381

Sent from my SM-G975U using Tapatalk

[Corsairprime]

Observation: You could guys could try using a thinner thermostatted Sandwich plate. The Stillen one looks to be twice the size of others I have seen. I use a mix of parts and I can use any of the discussed filters (Mobil 1, Amsoil, K&N) and currently use the K&N HP 1008. I have used this one since the car was new. No Leaks. Easy to install with the hex nut welded to the back side. Just my thoughts.

[ZoomZ]

Originally Posted by VQ37

Hello all,

I know there are lots of threads that discussed about compatible oil filter for
Stillen oil cooler sandwich plate.

So far, I found two oil filters that works.

K&N oil filter HP-1008
Purolator Pureone PL10193
Mobil 1 M1-105

You mean M1-108? That's the standard size for 370Z. Same size as KN HP-1008 except no Nut on end, so it may fit better wihtoiut the nut.

[Zyonara91]

Originally Posted by VQ37

Hello all,

I know there are lots of threads that discussed about compatible oil filter for
Stillen oil cooler sandwich plate.

So far, I found two oil filters that works.

K&N oil filter HP-1008
Purolator Pureone PL10193
Mobil 1 M1-105

I know there is Fram filter too but I don't want to use that one.
It is hard for me to buy any of three filter above at local part store.
I saw one of post saying someone is using Mobil 1 M1-110 but not sure
if it's for Stillen sandwich palte.

Is anyone using Mobil M1-110 with Stillen sandwich plate?
Or does anyone use other oil filter besides oil filter that I mentioned?

Please reply if you do!

Thank you!!

If the Fram you are talking about is the Fram Ultra Synthetic oil filter then I would take that over the other two without thinking twice. The filter is well respected and favoured at BITOG forums. It has a synthetic media (not paper or any of that crap) and is backed by a wire. The pleats are nice and thick and the only other filters that even come close to it are Royal Purple and Amsoil.

Here, hopefully one of these fit? A good review and educational video even if you are not looking for a oil filter:

[Tractionless]

Originally Posted by Zyonara91

If the Fram you are talking about is the Fram Ultra Synthetic oil filter then I would take that over the other two without thinking twice. The filter is well respected and favoured at BITOG forums. It has a synthetic media (not paper or any of that crap) and is backed by a wire. The pleats are nice and thick and the only other filters that even come close to it are Royal Purple and Amsoil.

What's the Fram part number, FPS7317?

I'm using Purolator PL 14610 without issue.