leaking slight oil from Valve Cover

megalapagas · 07-09-2014, 06:55 PM

As the tittle says it looks like if someone spit oil down to the headers heat shield and everything else around it (Just very minimal nothing exagerating). My question is can I just pour in a Oil Leak sealer? Also why does this happen, why does the valve cover gasket get shot? Its my DD with some spirited driving, I'm to the point where I just want to rid of my car, changing the gaskets was a hastle last time I did em.

Spooler · 07-09-2014, 11:00 PM

First thing to do would be just to tighten down on them if they are loose. I need to take a look at them. I have to ask, did you put RTV everywhere? It is only needed in certain places if at all.

SouthArk370Z · 07-10-2014, 12:03 AM

Re-torquing the fasteners may do the trick.

megalapagas · 07-10-2014, 01:21 AM

I will try and get some pics to you guys, but I will also try Re-torquing the fastners, didn't think of that while i under my Gloomy Cloud of "WHYYYY Mee!??" hahahaha! Thx and ill get back to you guys ASAP

IDZRVIT · 07-10-2014, 10:14 AM

Quote:

Originally Posted by megalapagas

As the tittle says it looks like if someone spit oil down to the headers heat shield and everything else around it (Just very minimal nothing exagerating). My question is can I just pour in a Oil Leak sealer? Also why does this happen, why does the valve cover gasket get shot? Its my DD with some spirited driving, I'm to the point where I just want to rid of my car, changing the gaskets was a hastle last time I did em.

I don't know your skill level so no offence, but did you do it right? The gasket shouldn't fail if installed according to the manufactiurer's installation instructions i.e. the gasket should last quite a while. Leak sealer could work but the best fix is to determine the cause and repair/replace as required.

wstar · 07-10-2014, 10:16 AM

I wouldn't touch that leak sealer type stuff, if you mean the kind you add to your engine oil. Especially not for a relatively-superficial issue like a valve cover gasket.

jwick · 07-10-2014, 11:46 AM

Where exactly is the leak?

1slow370 · 07-10-2014, 12:45 PM

a freshly installed valve cover gasket shouldn't leak, key things on the vhr gaskets for proper install is to make sure the old silicone is gone, and to follow the instructions in the manual on how and where to apply new silicone, and to follow the torque sequence. the gasket is pretty thick so when you tighten it down it is possible to tighten it on an angle which is bad for the gasket.

Fountainhead · 07-10-2014, 03:42 PM

I don't know if OP means the last time he changed valve covers on any car, or on the Z...

1slow370 · 07-10-2014, 03:46 PM

he changed his valve cover gasket pics are in his nitrous thread

megalapagas · 07-25-2014, 03:54 AM

Well haven't had a chance to update lately and check on my Z...valve covers are fine no oil leaks but I did found this though^^^^ Do Our motor monts have fluid in them??? <'--Dumb question but its worth a **** and I'm about to check if I have an oil leak on my oil cooler lines after this is posted.

1slow370 · 07-25-2014, 04:19 AM

the mounts are liquid filled but it doesn't look blown, most likely oil from somewhere else like the fittings or sandwhich plate seals if you have an oil cooler. you might just need to take the filter off and tighten the nut that holds the sandwich plate on.

Edit: also thats not slight oil thats a **** ton of oil

fuct · 07-25-2014, 09:03 AM

^^^exactly! thats not a little oil man!

1slow370 · 07-25-2014, 12:39 PM

hopefully not too much of it got in the alternator, it tends to make dirt stick and the dirt can short stuff if it gets run around in there.

megalapagas · 07-25-2014, 01:08 PM

[IMG]

[/IMG]

Well as you can see started digging more down took off the undershroud (slightly difficult without jack stands but do able) and yea undershroud was pretty much filled with dirt and some oil....I was able to clean the alternator which was my main concern though. So in order to fix this leak before I go running on to my local autoparts store and buying a leak sealer hahahaha jk jk jk...what is needed? O rings?? Or whatexactly? And in order to fix this I will have to drain my oil correct in order to do it?

07-09-2014, 06:55 PM	#1 (permalink)
megalapagas Enthusiast Member Join Date: May 2013 Location: McAllen,TX Posts: 457 Drives: '10 370Z Tour A/T Rep Power: 12	leaking slight oil from Valve Cover As the tittle says it looks like if someone spit oil down to the headers heat shield and everything else around it (Just very minimal nothing exagerating). My question is can I just pour in a Oil Leak sealer? Also why does this happen, why does the valve cover gasket get shot? Its my DD with some spirited driving, I'm to the point where I just want to rid of my car, changing the gaskets was a hastle last time I did em. __________________ GTM 34 Row Oil Cooler \| K&N Drop Ins w/ Z1's Post MAF Tubes \| F.I Non-Res'd 2.5" T.P w/ CF CBE \| Axis Wheels \| Piecing together My Own Custom T4 Top Mount Single Turbo Kit Still in the works \|

07-09-2014, 11:00 PM	#2 (permalink)
Spooler A True Z Fanatic Join Date: Jun 2014 Location: Ga Posts: 13,800 Drives: 2013 Nismo 370z Rep Power: 2684392	First thing to do would be just to tighten down on them if they are loose. I need to take a look at them. I have to ask, did you put RTV everywhere? It is only needed in certain places if at all. megalapagas likes this.

07-10-2014, 12:03 AM	#3 (permalink)
SouthArk370Z Premium Member Join Date: Nov 2010 Location: South Arkansas Posts: 8,435 Drives: 2014 Challenger Rep Power: 324198	Re-torquing the fasteners may do the trick. megalapagas likes this. __________________ Steering Lock Links - Search The370Z Bookmarklet - FSM @ NICOclub Mankind has progressed past the need for war but we haven't evolved that far. - NachoMahma

07-10-2014, 01:21 AM	#4 (permalink)
megalapagas Enthusiast Member Join Date: May 2013 Location: McAllen,TX Posts: 457 Drives: '10 370Z Tour A/T Rep Power: 12	I will try and get some pics to you guys, but I will also try Re-torquing the fastners, didn't think of that while i under my Gloomy Cloud of "WHYYYY Mee!??" hahahaha! Thx and ill get back to you guys ASAP Initial Z likes this. __________________ GTM 34 Row Oil Cooler \| K&N Drop Ins w/ Z1's Post MAF Tubes \| F.I Non-Res'd 2.5" T.P w/ CF CBE \| Axis Wheels \| Piecing together My Own Custom T4 Top Mount Single Turbo Kit Still in the works \|

07-10-2014, 10:16 AM	#6 (permalink)
wstar A True Z Fanatic Join Date: Mar 2009 Location: Houston, TX Posts: 4,024 Drives: too slow Rep Power: 3594	I wouldn't touch that leak sealer type stuff, if you mean the kind you add to your engine oil. Especially not for a relatively-superficial issue like a valve cover gasket. SouthArk370Z, Plasmite, Limeybastard and 1 others like this. __________________ 7AT Track Car! Journal thread / Car setup details

07-10-2014, 11:46 AM	#7 (permalink)
jwick A True Z Fanatic Join Date: Dec 2010 Location: Houston Posts: 14,532 Drives: '10 G37 6MT Rep Power: 2465056	Where exactly is the leak? __________________ '10 G37T 6MT Graphite/Graphite - BP - G37T Build

07-10-2014, 12:45 PM	#8 (permalink)
1slow370 A True Z Fanatic Join Date: Aug 2009 Location: In the D Posts: 3,732 Drives: v8 74 260z ;) Rep Power: 7251	a freshly installed valve cover gasket shouldn't leak, key things on the vhr gaskets for proper install is to make sure the old silicone is gone, and to follow the instructions in the manual on how and where to apply new silicone, and to follow the torque sequence. the gasket is pretty thick so when you tighten it down it is possible to tighten it on an angle which is bad for the gasket. fuct and Plasmite like this. __________________ ANSWER PRICE LIST Answers - - - - - - - - - - - - - - - - $0.75 Answers (requiring thought) - - - - $1.25 Answers (correct) - - - - - - - - - - $12.50

07-10-2014, 03:42 PM	#9 (permalink)
Fountainhead Track Member Join Date: Feb 2013 Location: FL Posts: 834 Drives: 2019 Civic Type R Rep Power: 14	I don't know if OP means the last time he changed valve covers on any car, or on the Z...

07-10-2014, 03:46 PM	#10 (permalink)
1slow370 A True Z Fanatic Join Date: Aug 2009 Location: In the D Posts: 3,732 Drives: v8 74 260z ;) Rep Power: 7251	he changed his valve cover gasket pics are in his nitrous thread __________________ ANSWER PRICE LIST Answers - - - - - - - - - - - - - - - - $0.75 Answers (requiring thought) - - - - $1.25 Answers (correct) - - - - - - - - - - $12.50

07-25-2014, 03:54 AM	#11 (permalink)
megalapagas Enthusiast Member Join Date: May 2013 Location: McAllen,TX Posts: 457 Drives: '10 370Z Tour A/T Rep Power: 12	Well haven't had a chance to update lately and check on my Z...valve covers are fine no oil leaks but I did found this though^^^^ Do Our motor monts have fluid in them??? <'--Dumb question but its worth a **** and I'm about to check if I have an oil leak on my oil cooler lines after this is posted. __________________ GTM 34 Row Oil Cooler \| K&N Drop Ins w/ Z1's Post MAF Tubes \| F.I Non-Res'd 2.5" T.P w/ CF CBE \| Axis Wheels \| Piecing together My Own Custom T4 Top Mount Single Turbo Kit Still in the works \|

07-25-2014, 04:19 AM	#12 (permalink)
1slow370 A True Z Fanatic Join Date: Aug 2009 Location: In the D Posts: 3,732 Drives: v8 74 260z ;) Rep Power: 7251	the mounts are liquid filled but it doesn't look blown, most likely oil from somewhere else like the fittings or sandwhich plate seals if you have an oil cooler. you might just need to take the filter off and tighten the nut that holds the sandwich plate on. Edit: also thats not slight oil thats a ** ton of oil Initial Z likes this. __________________ ANSWER PRICE LIST** Answers - - - - - - - - - - - - - - - - $0.75 Answers (requiring thought) - - - - $1.25 Answers (correct) - - - - - - - - - - $12.50

07-25-2014, 09:03 AM	#13 (permalink)
fuct A True Z Fanatic Join Date: May 2009 Location: Sugar Land Posts: 3,692 Drives: 97' Ranger :) Rep Power: 24	^^^exactly! thats not a little oil man!

07-25-2014, 12:39 PM	#14 (permalink)
1slow370 A True Z Fanatic Join Date: Aug 2009 Location: In the D Posts: 3,732 Drives: v8 74 260z ;) Rep Power: 7251	hopefully not too much of it got in the alternator, it tends to make dirt stick and the dirt can short stuff if it gets run around in there. __________________ ANSWER PRICE LIST Answers - - - - - - - - - - - - - - - - $0.75 Answers (requiring thought) - - - - $1.25 Answers (correct) - - - - - - - - - - $12.50

07-25-2014, 01:08 PM	#15 (permalink)
megalapagas Enthusiast Member Join Date: May 2013 Location: McAllen,TX Posts: 457 Drives: '10 370Z Tour A/T Rep Power: 12	[IMG][/IMG] Well as you can see started digging more down took off the undershroud (slightly difficult without jack stands but do able) and yea undershroud was pretty much filled with dirt and some oil....I was able to clean the alternator which was my main concern though. So in order to fix this leak before I go running on to my local autoparts store and buying a leak sealer hahahaha jk jk jk...what is needed? O rings?? Or whatexactly? And in order to fix this I will have to drain my oil correct in order to do it? __________________ GTM 34 Row Oil Cooler \| K&N Drop Ins w/ Z1's Post MAF Tubes \| F.I Non-Res'd 2.5" T.P w/ CF CBE \| Axis Wheels \| Piecing together My Own Custom T4 Top Mount Single Turbo Kit Still in the works \|

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
check engine light.....valve covers leaking?	7speed	Nissan 370Z Warranty / Scheduled Maintenance / Servicing / Repairs	10	11-03-2013 06:02 PM
Need replace the valve cover. Help needed.	chuan.1992	Engine & Drivetrain	8	03-22-2013 12:06 PM
Radiator Leaking	hazzazi	Mid-Atlantic Region	11	10-11-2011 01:31 PM
Valve cover breathers?	bigrob126	Intake/Exhaust	5	06-24-2011 05:25 PM