Yellowing CMC fluid

fuct

mine broke at 24k. they replaced it under warranty. now im at 66k, i cross my fingers every drive.....

JARblue

My clutch looks fine (and would still look fine in another 10K miles), but they still wouldn't cover it. The Nissan dealer explained that they will not fix it outside of the 36K/3yr warranty unless they can get corporate to authorize the claim. The service manager was very honest with me and said corporate only authorizes those types of claims as "good will" to deserving customers. Since I have virtually no service history (just the car purchase and a single warranty claim for my headliner), it was pretty much a guaranteed rejection. Easy for them to just call it a "wearable" part. Which is ridiculous IMO. Plastic doesn't belong anywhere in the clutch system

__________________

Fountainhead

Well I've examined a slightly used CSC ten ways from Sunday, and don't find anything significant but an ORing and a polished sleeve. Anything else is comparable to any other CSC I've seen other places. Sure, some have a metal body but all the metal in the world won't make a diff to that ORing and it's polished metal sleeve. If that ORing gets enough dirt in it it will leak/fail. I don't think plastic has anything to do with it failing unless you're crazy shifting at 7500, and everything gets so hot from the thrust bearing that the ORing deforms, or gets large bits of trash in its path.

My CSC is at 22K and it's a 2009 model.

JARblue

It had 51K miles on it, so maybe more than slightly used. I certainly never had any problems with it. My understanding was it cannot stand up repeated hard launches. Since I don't do that, I wasn't expecting any problems. However, driving to remote areas of Texas with no cell service, I didn't want to risk failure, however it might happen. I would be interested in how many failed CSCs were due to o-ring failure vs plastic failure.

Did you post up pics somewhere? Let me know when you do and where they are

__________________

jwick

Mine went out at 1200 miles. No wear at all on it since I was still in the brake in period. Took it for one test drive after brake in, ran thru third getting on the freeway (no launch, no crazy shifting) and it was dead when I exited the freeway and got to the stop light.

Infiniti replaced it under warranty and it worked perfectly fine until I upgraded it as part of the turbo install at 44k.

__________________
'10 G37T 6MT Graphite/Graphite - BP - G37T Build

Fountainhead

I will probably post in Engine/Drivetrain this weekend. I've enjoyed it! It's all cleaned up and actually I saw no major wear, any scuffies or scratches to the ORing or the CSC body are due to my disassembly, getting the Circlip off and then getting the flared business end of the ORing back into the CSC barrel proved the most difficult.

40 to 332

I'd be interested in knowing whether anyone has experienced clutch problems due to the failure of the Z Speed Heavy Duty CSC. The HD CSC has been out for some time, and I gather that a number of folks have had it installed. I'd be especially interested in knowing whether anyone has experienced problems after swapping out the OEM CSC with the HD version, and who also installed a new CMC at the same time (as recommended by Joe at Z Speed). The information could be useful to the OP and others.

Juan@Fontana

I am fully aware of both of those kits, OS Giken is also currently developing a CSC delete kit too.

reason behind the Specialty Z getting my preference is because both the Flywheel is fully rebuild-able along with the clutch disk. so in the future when your clutch is done you don't have to make another 1200+ dollar expense replacing it. you can send your original units back to them for new friction plates, along with getting the pressure plate and disk for a refresh. The segmented design is also extremely useful for us who like to track or beat on our cars.

the CSC is made by Tilton which is a very reputable manufacture for racing CSC's for many super cars so it's made for abuse and can handle daily driving without any issues, keeps you from rigging any funny looking odd brackets and other stuff outside of the transmission and works well with all your other factory components. The RPS/SZ kit is just a clean solution that handles every flaw in the OEM system without any compromise. I'm in the middle of

I have really high hopes for the OS Giken CSC delete kit, I hope it is clean and functional like their Evo 9 and GTR push type conversion kit.

quickboat

I guess I'll nurse the factory one until it is out of warrantee. Wont the 60k Gold extended warrantee cover it too?
Is DOT 4 475deg fluid a better choice than stock?

JARblue

Any links to details on the SZ kit you speak of and/or the development of the OSG kit?

__________________

Juan@Fontana

Bob’s NISMO 370Z TT |

if you have any questions i can do my best to answer them, and for anyone looking into this options i can give you guys a deal on it

-Juan

zefaulter

Do you know when it'll be released and price point?

What about OSG kit? any info on that?

Juan@Fontana

OS Giken is keeping everything under wraps until it's finished so i can't give you any information on that, the Specialty Z kit I've been selling for almost 2 years now.

-Juan

zefaulter

Thanks Juan, found Specialty Z kit information on their website after I replied to this thread

I mean no offense to their product. Out of curiosity, Is there a reason why their CSC/clutch kit is not as "popular" on this forum? most threads I read about south bend with occasional other brands like JWT, Exedy and OS Giken but never SZ. could just be me

Juan@Fontana

I Honestly don't know, SZ has always put phenomenal products out in the market it is really weird to me that they are not popular in this forum. They've been around for years. Very reputable guys among the 300ZX community. I sell their products because of the quality, craftsmanship and peace of mind knowing it will always perform without disappointment.