FIXED: Rear axle click clunk noise

juld0zer

it can be done but it's one of those 'you might aswell do it' things. Do it right the first time around. the FSM does specify greasing the mating face when replacing axles.

if you dont want to take the axles out, you can remove the big nut and push the axle out as far as it will go then use a brush or similar tool to apply the grease. it's very fiddly due to space constraints and u cannot clean out the existing crud and corrosion unless you remove the axles.

set aside an afternoon and that should be enough time

LennyZCSD

It is a TSB dealer free fix now,,, it was great at the ZCON in San Diego as I was able to talk with the powers that be in Nissan as they attended the Convention

JARblue

So far three Austin dealers have refused to acknowledge this TSB because I cannot produce it...

__________________

juld0zer

i wished we had that much Z support here in Australia.

JARblue

This is exactly what I figured Maybe in November I will have an afternoon to work on it. I'm half tempted to replace the CV joints completely.

__________________

RBfastback

it's my day off so I figured I'd just go to my dealer in fort Myers an see what they say before I do it myself an let u know.

walked in gave them the run down on what's going on an that there is a tsb on it, he said absolutely but it isn't free... I said o it's not covered under the 5/60 drive train because everyone else I know (on the forum) says there dealer did it for free?
then he said o well as long as u still have ur 5/60 then it's free.

I'm in the waiting room now while the look at it..

JARblue

I will be interested in what they have to say

__________________

RBfastback

ok so after 1 hour they handed my keys back and said that they went ahead and just did it..
$0 cash spent.
I didn't even have an app.
I was pretty surprised

Bhaukei

OKAY, LISTEN GUYS. i have the same problem about the clicking noise on my 2010 40th Z, i took it to the dealership, they fixed it, cost is 130 dollars (Im in canada). So it is both Axle/hub/bearing needs lubrication. And yes They said this is a TSB only for 3 years 60000km, if not , then thats a maintenance. A lot saying the noise might come back, but still i give the dealership a shot, hopefully it won't come back.

DON'T LET ANY OTHER MEMBER FOOL YOU, IT HAS NOTHING TO DO WITH CALIPER, TRANSMISSION AND WHATEVER THEY SAID. IF YOU HEAR CLICKING WHEN YOU SLOWING DOWN THE CAR / START TO DRIVE/ REVERSE. THEN THATS A AXLE THING.

juld0zer

loose brake pads can create a similar noise when changing directions while applying the brake. the axle click is higher pitched and more metallic whereas the pads moving in the calipers sounds more dull. sort of like when you strike near the rotor dust shield. loose pads are also going to make noise on bumps whereas the axle click wont show on bumps unless you coincidentally accelerate/let go of the gas pedal

240se

Has anyone been able to get a copy of the TSB or the TSB number other than the one that just mentions the 350Z?

1slow370

Yeah I'm sorry but It can be any of those things, they all eventually will make the same sort of noise, that is why your mechanic or dealer needs to be able to figure out exactly which one it is so they don't waste your money fixing something that isn't broken, the axle grease is just one of the more common problems. Don't let your dealer fool you just because something doesn't usually break doesn't mean it won't.

Or to sum that up just because on your car and a lot of cars it was the axles doesn't mean it is always the axles

__________________
ANSWER PRICE LIST
Answers - - - - - - - - - - - - - - - - $0.75
Answers (requiring thought) - - - - $1.25
Answers (correct) - - - - - - - - - - $12.50

Tadpole

Nope the clicking when you accelerate is the axles. My 350z did this and I replaced and purchased them at a boneyard. Clicking was gone after that. This is the first place to troubleshoot, then check the rest of the drive train next

__________________
Takeda TR3009P Short Ram Intakes, Custom Dual Exhaust, X-Piped with 18" Resonators & TopSpeed Axle Backs. EVO-R Led Third Foglight,

Read T

Just went to the dealership here in Charlotte. Told them the car was clicking from both axles. The service manager told me he'd have the techs take a look and that generally a going-over was $99. He had me wait in the waiting room. About an hour later, he found me, said they had fixed the problem by greasing both axles and found TSB NTB12-055d for the problem. No charge (including the $99 I was originally quoted). Walked out with no money spent and a click-less car. Attached is a picture of the invoice. The manager said this should be covered under the 6-year 60,000-mi warranty which as of today's date covers all 370Z's. This should be a free fix if you are reading this.

__________________
2011 Nissan 370z Black Cherry Sport Pkg - Daily Driver, , 1960 Morgan +4 fun car, 1986 BMW 325ES, 1998 M3 and 1996 Spec Miata - Race Cars
SUPPORT TEAM WINSOME RACING - WRL, CHUMP, LEMONS

JARblue

I'm glad its working out for some of you guys. Unfortunately, not all dealers are the same...

__________________