Nissan 370Z Forum  

Something leaking at the steering rack

Does anybody knew what kind of seals behind this thing. I didnt see any power steering level drop so i wonder what it is. What would be the the effect

Go Back   Nissan 370Z Forum > Nissan 370Z Tech Area > Engine & Drivetrain


Like Tree8Likes

Reply
 
LinkBack Thread Tools Display Modes
Old 06-22-2014, 11:39 PM   #1 (permalink)
ZeN
Base Member
 
Join Date: Apr 2011
Location: Malaysia
Posts: 116
Drives: 09 PW 7AT 370z
Rep Power: 14
ZeN is on a distinguished road
Default Something leaking at the steering rack

Does anybody knew what kind of seals behind this thing. I didnt see any power steering level drop so i wonder what it is. What would be the the effect if i tighten that nut



lately the steering felt loose and this could be the reason. How do we adjust the steering wheel tension? I want to get that heavy steering feel back.

Last edited by ZeN; 06-22-2014 at 11:47 PM.
ZeN is offline   Reply With Quote
Old 06-23-2014, 02:18 PM   #2 (permalink)
Track Member
 
Fountainhead's Avatar
 
Join Date: Feb 2013
Location: FL
Posts: 834
Drives: 2019 Civic Type R
Rep Power: 14
Fountainhead has much to be proud ofFountainhead has much to be proud ofFountainhead has much to be proud ofFountainhead has much to be proud ofFountainhead has much to be proud ofFountainhead has much to be proud ofFountainhead has much to be proud ofFountainhead has much to be proud of
Default

Hey! My Z leaks there too! It's not as dirty as yours but yes, I had to wipe it off. I have no reservoir low issues, and it's not a drip yet. I have no idea whether to spin that nut or not, could look in the FSM.
Fountainhead is offline   Reply With Quote
Old 06-23-2014, 03:57 PM   #3 (permalink)
Enthusiast Member
 
Join Date: Feb 2014
Location: California
Posts: 319
Drives: 14 370z
Rep Power: 11
Akurei is on a distinguished road
Default

If I'm correct, I think that bolt is your steering wheel tensioner. If it's leaking, probably an indication it is getting a little loose. However you don't want it too tight

Last edited by Akurei; 06-23-2014 at 04:01 PM.
Akurei is offline   Reply With Quote
Old 06-23-2014, 04:44 PM   #4 (permalink)
MJB
A True Z Fanatic
 
MJB's Avatar
 
Join Date: Aug 2011
Location: Tacoma, WA
Age: 41
Posts: 1,498
Drives: a POS truck
Rep Power: 496
MJB has a reputation beyond reputeMJB has a reputation beyond reputeMJB has a reputation beyond reputeMJB has a reputation beyond reputeMJB has a reputation beyond reputeMJB has a reputation beyond reputeMJB has a reputation beyond reputeMJB has a reputation beyond reputeMJB has a reputation beyond reputeMJB has a reputation beyond reputeMJB has a reputation beyond repute
Default

I have a slight leak from there as well.
__________________
09 Nismo #0483 sold. Viper or C7 next time around.
MJB is offline   Reply With Quote
Old 06-23-2014, 04:51 PM   #5 (permalink)
Enthusiast Member
 
megalapagas's Avatar
 
Join Date: May 2013
Location: McAllen,TX
Posts: 457
Drives: '10 370Z Tour A/T
Rep Power: 12
megalapagas is on a distinguished road
Default

Sooo pretty much just "tighten" it a little?? Have this issue as well and I was about to drop in a "Bar's Poeer steering leak sealer" from Oreillys.
__________________
GTM 34 Row Oil Cooler | K&N Drop Ins w/ Z1's Post MAF Tubes | F.I Non-Res'd 2.5" T.P w/ CF CBE | Axis Wheels | Piecing together My Own Custom T4 Top Mount Single Turbo Kit *Still in the works* |
megalapagas is offline   Reply With Quote
Old 06-24-2014, 08:42 AM   #6 (permalink)
ZeN
Base Member
 
Join Date: Apr 2011
Location: Malaysia
Posts: 116
Drives: 09 PW 7AT 370z
Rep Power: 14
ZeN is on a distinguished road
Default

Thanks, so that bolt is the steering wheel tensioner, that would means if i were to tighten that one i would get back my heavy steering feels..correct ? Just want some confirmation before i do it tomorrow.
ZeN is offline   Reply With Quote
Old 06-28-2014, 04:56 PM   #7 (permalink)
Enthusiast Member
 
Q8y_drifter's Avatar
 
Join Date: Mar 2010
Location: Kuwait
Posts: 306
Drives: 08 Infiniti G35 5AT
Rep Power: 15
Q8y_drifter is on a distinguished road
Default

Loose steering feel at higher speeds, slight vibration and slight leak at the steering rack adjustment nut on my car.
Subscribed for updates. Let me know how it goes. Tried looking in the FSM for adjustment procedures and there was nothing at all.
__________________
08 G35 5AT Sedan | Stillen CBE | Invidia HFC | Injen CAI | Uprev Tune | Akebono BBK | Tanabe Coilovers | Hotchkis Sway Bars | GTSpec FSB | Black Headlights & Grille | Volk GT-F Wheels | Hankook V12 Evo Tires
Q8y_drifter is offline   Reply With Quote
Old 06-28-2014, 05:00 PM   #8 (permalink)
Premium Member Bitches
 
DEpointfive0's Avatar
 
Join Date: Jan 2012
Location: SoCal
Posts: 14,824
Drives: a lot
Rep Power: 17151
DEpointfive0 has a reputation beyond reputeDEpointfive0 has a reputation beyond reputeDEpointfive0 has a reputation beyond reputeDEpointfive0 has a reputation beyond reputeDEpointfive0 has a reputation beyond reputeDEpointfive0 has a reputation beyond reputeDEpointfive0 has a reputation beyond reputeDEpointfive0 has a reputation beyond reputeDEpointfive0 has a reputation beyond reputeDEpointfive0 has a reputation beyond reputeDEpointfive0 has a reputation beyond repute
Default

Quote:
Originally Posted by megalapagas View Post
Sooo pretty much just "tighten" it a little?? Have this issue as well and I was about to drop in a "Bar's Poeer steering leak sealer" from Oreillys.
Never wanna do crap like that unless it's your LAST possible option...
Z-Girl 12 likes this.
__________________
Do YOU want to know what/where I got my username from?
( Click to show/hide )
DEpointfive0 is offline   Reply With Quote
Old 07-08-2014, 11:13 AM   #9 (permalink)
MJB
A True Z Fanatic
 
MJB's Avatar
 
Join Date: Aug 2011
Location: Tacoma, WA
Age: 41
Posts: 1,498
Drives: a POS truck
Rep Power: 496
MJB has a reputation beyond reputeMJB has a reputation beyond reputeMJB has a reputation beyond reputeMJB has a reputation beyond reputeMJB has a reputation beyond reputeMJB has a reputation beyond reputeMJB has a reputation beyond reputeMJB has a reputation beyond reputeMJB has a reputation beyond reputeMJB has a reputation beyond reputeMJB has a reputation beyond repute
Default

Any updates?
__________________
09 Nismo #0483 sold. Viper or C7 next time around.
MJB is offline   Reply With Quote
Old 07-08-2014, 12:25 PM   #10 (permalink)
Track Member
 
Fountainhead's Avatar
 
Join Date: Feb 2013
Location: FL
Posts: 834
Drives: 2019 Civic Type R
Rep Power: 14
Fountainhead has much to be proud ofFountainhead has much to be proud ofFountainhead has much to be proud ofFountainhead has much to be proud ofFountainhead has much to be proud ofFountainhead has much to be proud ofFountainhead has much to be proud ofFountainhead has much to be proud of
Default

I've read that you don't want to adjust that nut unless you have factory training and / or some method to verify the adjustment is within tolerance.
I have no leak significant enough to warrant messing with it, but mine is wet and dirt adheres to it. I just wipe it off every couple of months.

I've also read on these forums that Nissan incorporates speed adjusted Power Steering that tightens or loosens the turning resistance depending on speed of the vehicle.
Fountainhead is offline   Reply With Quote
Old 07-08-2014, 08:16 PM   #11 (permalink)
Enthusiast Member
 
Q8y_drifter's Avatar
 
Join Date: Mar 2010
Location: Kuwait
Posts: 306
Drives: 08 Infiniti G35 5AT
Rep Power: 15
Q8y_drifter is on a distinguished road
Default

So I drove my car up the ramps today, cleaned up the area from all the grease and grime with degreaser and a shop towel and tightened the nut about 1/3 of a turn. Took it out for a test drive and steering definitely feels better and tighter than before, BUT steering was still loose, particularly at higher speeds.
Went back home again, up the ramps, tightened another 1/3 turn and took it for a second test drive. MUCH better. Now it tracks straight when driving at high way speeds and you feel directly connected to the tires unlike before.
So far it's about 2/3 turn in than when I started. My tires are pretty bad and are causing quite a lot of vibrations at highway speeds so I'm going to be replacing them soon. I'm going to keep a close eye on its handling and steering feel after new tires and realignment. I might tighten the nut a tiny bit more afterwards.

FYI, the nut IIRC is 23mm. You'll need to use a 23mm wrench/spanner to tighten it due to lack of space.
__________________
08 G35 5AT Sedan | Stillen CBE | Invidia HFC | Injen CAI | Uprev Tune | Akebono BBK | Tanabe Coilovers | Hotchkis Sway Bars | GTSpec FSB | Black Headlights & Grille | Volk GT-F Wheels | Hankook V12 Evo Tires
Q8y_drifter is offline   Reply With Quote
Old 07-09-2014, 11:31 AM   #12 (permalink)
Track Member
 
Fountainhead's Avatar
 
Join Date: Feb 2013
Location: FL
Posts: 834
Drives: 2019 Civic Type R
Rep Power: 14
Fountainhead has much to be proud ofFountainhead has much to be proud ofFountainhead has much to be proud ofFountainhead has much to be proud ofFountainhead has much to be proud ofFountainhead has much to be proud ofFountainhead has much to be proud ofFountainhead has much to be proud of
Default

The first thing that comes to mind is how did it get loose in the first place and how do I keep it where I left it if it loosened in the first place. Can't thread lock it because of the fluid contamination and can't nock the threads at current position because one day you may have to remove it....I guess scribe a mark where you like the tension and then at least you have a reference point to refer to the next time it loosens.
Plasmite likes this.
Fountainhead is offline   Reply With Quote
Old 07-09-2014, 11:06 PM   #13 (permalink)
A True Z Fanatic
 
Join Date: Jun 2014
Location: Ga
Posts: 13,782
Drives: 2013 Nismo 370z
Rep Power: 2684392
Spooler has a reputation beyond reputeSpooler has a reputation beyond reputeSpooler has a reputation beyond reputeSpooler has a reputation beyond reputeSpooler has a reputation beyond reputeSpooler has a reputation beyond reputeSpooler has a reputation beyond reputeSpooler has a reputation beyond reputeSpooler has a reputation beyond reputeSpooler has a reputation beyond reputeSpooler has a reputation beyond repute
Default

That nut adjust the play in between the gears in the rack. If you tighten it too much your steering wheel will not return to center as it is supposed to. You may have some slight wear in the gears. Just be careful that the wheel will return to center on it's own and not get stuck.
Spooler is offline   Reply With Quote
Old 07-11-2014, 07:33 PM   #14 (permalink)
Enthusiast Member
 
Q8y_drifter's Avatar
 
Join Date: Mar 2010
Location: Kuwait
Posts: 306
Drives: 08 Infiniti G35 5AT
Rep Power: 15
Q8y_drifter is on a distinguished road
Default

Went up the ramps today and tightened the nut another ~1/5 of a turn or so. Felt some resistance this time. Took it out for a test drive and it's as tight as stock now. Steering wheel feels heavier yet has no issues returning to center at all. It tracks straight as an arrow at high speeds even when driving over rough patches of asphalt. It used to be unpredictable and downright scary to drive on rough sections on highway roads before and I assumed it was my worn out front tires. Steering and maneuvering is far better as well.

I still haven't replaced my tires yet (planning on powder coating wheels, doing both in one go), so will update again once I do so.
SwedeZ and frozenwaffles like this.
__________________
08 G35 5AT Sedan | Stillen CBE | Invidia HFC | Injen CAI | Uprev Tune | Akebono BBK | Tanabe Coilovers | Hotchkis Sway Bars | GTSpec FSB | Black Headlights & Grille | Volk GT-F Wheels | Hankook V12 Evo Tires
Q8y_drifter is offline   Reply With Quote
Old 07-11-2014, 10:33 PM   #15 (permalink)
A True Z Fanatic
 
Z-Girl 12's Avatar
 
Join Date: Apr 2012
Location: Florida
Posts: 4,105
Drives: Spirited
Rep Power: 11716
Z-Girl 12 has a reputation beyond reputeZ-Girl 12 has a reputation beyond reputeZ-Girl 12 has a reputation beyond reputeZ-Girl 12 has a reputation beyond reputeZ-Girl 12 has a reputation beyond reputeZ-Girl 12 has a reputation beyond reputeZ-Girl 12 has a reputation beyond reputeZ-Girl 12 has a reputation beyond reputeZ-Girl 12 has a reputation beyond reputeZ-Girl 12 has a reputation beyond reputeZ-Girl 12 has a reputation beyond repute
Default

Sub'd
__________________
2012 Z-SOLD
2014 Nismo #565 Fast Intentions CBE/HFC/Swift/SPC/RJM/H&R-15/20mm/Z1 CAI/Headers/Intake Manifold w/Uprev Tune 328.31whp/263.64tq
Z-Girl 12 is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[FOR SALE] 09 VQ37VHR Motorset (almost) complete! New steering rack, glass, calipers, NISMO wing Brian W. Parts for sale (Private Classifieds) 27 11-15-2013 01:34 PM
Rack & Pinion Broken "power steering gear" Carbon_z Brakes & Suspension 15 01-21-2012 11:07 AM
Wire ties on steering rack boot? ferrari_rich Nissan 370Z General Discussions 6 02-02-2010 08:56 PM


All times are GMT -5. The time now is 12:27 AM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2